# TCDS E00066NE: Rolls-Royce plc

- Type: Type certificate data sheet
- Status: Historical
- Holder: Rolls-Royce plc
- Revision: 3
- Revised: March 16, 2007
- Product: Engine
- Certification basis: Part 1, Part 21, Part 33
- Data sheet PDF: https://openairdocs.org/files/sha256/61/df/61df478b209b5cfc0426abf957ba64671826100b863c272b01df83eca8d2d3a4
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/F414C831ABAEB06F86257495006121D5.0001
- Page: https://openairdocs.org/tcds/E00066NE

## Models (8)

As the data sheet lists them.

- RB211 Trent 553-61
- RB211 Trent 556-61
- RB211 Trent 560A2-61
- RB211 Trent 556B-61
- RB211 Trent 560-61
- RB211 Trent 553A2-61
- RB211 Trent 556A2-61
- RB211 Trent 556B2-61

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
______________________________________________________________________________________________________________ 
* 
Page 1 2 3 4 5 6 7 
Revision 2 2 3 2 2 3 1 
 
LEGEND:  "- -" INDICATES "SAME AS PRECEDING MODEL" 
                   "---" INDICATES  "NOT APPLICABLE" 
NOTE:  SIGNIFICANT CHANGES ARE BLACK-LINED IN THE LEFT MARGIN. 
 
 
 
U.S. DEPARTMENT OF TRANSPORTATION 
 
FEDERAL AVIATION ADMINISTRATION 
 
TYPE CERTIFICATE DATA SHEET 
 
E00066NE 
 
TCDS NUMBER:   E00066NE 
 
REVISION:  3 
 
DATE:   March 16, 2007 
 
ROLLS-ROYCE  plc 
 
MODELS: 
 
RB211 TRENT  553-61 RB211 TRENT 553A2-61 
RB211 TRENT  556B-61 RB211 TRENT 556A2-61 
RB211 TRENT  556-61 RB211 TRENT 556B2-61 
RB211 TRENT  560-61 RB211 TRENT 560A2-61 
 
Engines of models described herein conforming with this data sheet, (which is part of Type Certificate Number E00066NE), and other 
approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in accordance 
with pertinent aircraft data sheets and applicable portions of the Federal aviation Regulations, provided they are installed, operated, and 
maintained as prescribed by the approved manufacturer's manuals and other approved instructions. 
 
TYPE CERTIFICATE (TC) HOLDER: Rolls-Royce plc 
    Derby, England 
 
1.  MODELS RB211 
Trent 553-61, 
553A2-61 
RB211 
Trent  556-61, 
556A2-61 
RB211 
Trent  556B-61, 
556B2-61 
RB211 
Trent  560-61, 
560A2-61 
TYPE High by-pass turbofan (by-pass ratio of 8. 5), axial flow, three-shaft.  Single stage low 
pressure fan driven by a five stage turbine.  Eight stage intermediate pressure compressor 
driven by a single stage turbine.  Six stage high pressure compressor driven by a single 
stage turbine.  Annular combustion chamber. 
RATINGS (See NOTE 1) 
 
   Maximum Continuous  (1) 
      Thrust pounds at sea level static 
 
   Takeoff (5 minutes)  (2) 
      Thrust pounds at sea level static 
      Equivalent bare engine thrust 
 
 
 
44359 
 
 
55780 
56655 
 
 
 
44359 
 
 
58462 
59350 
 
 
 
44359 
 
 
58462 (3) 
59350 
 
 
 
44359 
 
 
61902 
62740 
 (1) Flat rated to ISA +10 ºC for all altitudes. 
(2) Flat rated to ISA +15 ºC for all altitudes. 
(3) The Trent 556B-61 and 556B2-61 engines rated takeoff thrust is identical to the 
 Trent 556-61 and 556A2-61engine at ISA sea level static conditions.  The 
 556B-61 and 556B2-61 ratings  provide increased thrust for takeoff at altitudes 
 above sea level.  The magnitude of this increased thrust varies with altitude,  
 mach number and ambient temperatur e and provides the 560-61 and 560A2-61 
 ratings at 7341 feet and above.

E00066NE Page 2 of 7  
 
 
1.  MODELS (continued) RB211 
Trent 553-61, 
553A2-61 
RB211 
Trent 556-61 
556A2-61 
RB211 
Trent 556B-61 
556B2-61 
RB211 
Trent 560-61 
560A2-61 
PRINCIPAL DIMENSIONS, inches 
 
   Length 
      From tip of spinner (minus rubber 
      tip to tail bearing housing plug 
      mount) 
   Radius, maximum 
 
 
 
 
184.6 
 
 
66.5 
 
 
 
 
- - 
 
 
- - 
 
 
 
- - 
 
 
- - 
 
 
 
- - 
 
 
- - 
 
CENTER OF GRAVITY- complete 
      powerplant 
 
   Aft from powerplant station 100 
   Below centerline 
   Starboard from engine centerline 
 
 
CENTER OF GRAVITY- basic engine 
 
   Aft from powerplant station 100 
   Below centerline 
   Starboard from engine centerline 
 
 
 
 
27.1 
1.9 
0.1 
 
 
 
 
27.8 
2.2 
0.2 
 
 
 
 
- - 
- - 
- - 
 
 
 
 
- - 
- - 
- - 
 
 
 
 
- - 
- - 
- - 
 
 
 
 
- - 
- - 
- - 
 
 
 
 
- - 
- - 
- - 
 
 
 
 
- - 
- - 
- - 
 
WEIGHT 
   Dry powerplant 
   Basic engine 
 
 
13797 
10930 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
- - 
- - 
 Basic engine is the dry powerplant less n acelle, intake, cowl doors, CNA and thrust 
reverser. 
ENGINE PARTICULARS BUILD 
STANDARD 
   RR Drawing Introduction Sheet (DIS) 
553-61: 2207 
Issue 4 
553A2-61: 2230 
Issue 1 
556-61: 2208 
Issue 4 
556A2-61: 2231 
Issue 1 
556B-61: 2225 
Issue 4 
556B2-61: 2232 
Issue 1 
560-61: 2209 
Issue 4 
560A2-61: 2233 
Issue 1 
 
FUELS 
   APPROVED FUELS 
 
See relevant Engine Operating Instructions for approved fuels. 
 
 
See relevant Engine Operating Instructions for approved oils. 
OILS 
   APPROVED OILS 
   OIL CONSUMPTION 1.32 U.S. pints/hour overall inflight maximum for unrestricted operation. 
OIL CAPACITY 
   Nominal total system capacity 
   Nominal oil tank capacity 
   Minimum useable oil (including effect 
      of attitude) 
 
84.5 U.S. pints 
49.0 U.S. pints 
33.8 U.S. pints 
 
- - 
- - 
- - 
 
- - 
- - 
- - 
 
- - 
- - 
- - 
 
RB211 Trent 553-61, 556-61, 556B-61, 560-61, 553A2-61, 556A2-61, 556B2-61, 
and 560A2-61 
COMPONENTS 
 
   ELECTRONIC FULL AUTHORITY 
      FUEL 
   Fuel control 
   Fuel pump 
   Fuel metering unit 
 
IGNITION SYSTEM 
   Ignition system plugs 
   Ignition system units 
 
EQUIPMENT 
 
 
 
TRWEECS 500-04 
TRWTPS 500MK2 
TRWHMU 500MK2 
 
 
Federal Mogul CH34761 
Unison 430154 
 
For identification of equipment approved for use on these engines, refer to Chapter 1 
of appropriate Rolls-Royce Drawing Introduction Sheet (DIS)

E00066NE Page 3 of 7  
 
CERTIFICATION BASIS FAR 21.29 and FAR 33 effective Febr uary 1, 1965, as amended by FAR 33-1 through 33-19.  
Pursuant to FAR21.29(a)(1)(ii), the Type Certificate was issued in validation of the British Civil 
Aviation Authority Certification Standards JAR-E change 9 plus  
OP E/96/1 and E/97/1, which was found to provide a level of safety equivalent to that provided by 
FAR 33, Amendment 33-19. 
 
   APPLICATION       ISSUED/ 
MODEL         DATE         REVISED  SURRENDERED  
 
RB211 TRENT 553-61 MAY 20, 1998 November 20, 2001 
RB211 TRENT 556-61 MAY 20, 1998 November 20, 2001 
RB211 TRENT 556B-61 JAN 25, 2000 November 20, 2001 
RB211 TRENT 560-61 MAY 20, 1998 November 20, 2001 
RB211 TRENT 553A2-61 January 3, 2003 September 16, 2003 
RB211 TRENT 556A2-61 January 3, 2003 September 16, 2003 
RB211 TRENT 556B2-61 January 3, 2003 September 16, 2003 
RB211 TRENT 560A2-61 January 3, 2003 September 16, 2003 
The aviation authority for the United Kingdom, the UK Civil Aviation Authority (CAA), originally 
type certificated this engine.  The FAA validated this product under U.S. Type Certificate Number 
E00066NE. Effective September 28, 2003, the European Aviation Safety Agency (EASA) began 
oversight of this product on behalf of the UK. 
IMPORT 
REQUIREMENTS 
To be considered eligible for installation on U.S. registered aircraft, each new engine to be exported 
to the United States with UK CAA or EASA airworthiness approval shall have a Joint Aviation 
Authorities (JAA) or EASA Form 1, Authorized Release Certificate.  The JAA or EASA Form 1 
should state that the engine conforms to the type design approved under the U.S. Type Certificate 
E0066NE, is in a condition for safe operation and has undergone a final operational check. 
 
Additional guidance is contained in FAA Advisory Circular 21-23, "Airworthiness Certification of 
Civil Aircraft, Engines, Propellers, and Related Products Imported into the United States." 
 
N O T E S 
 
NOTE 1. The engine ratings are based on static test stand operation under the following A & B conditions: 
 
A. 
   (1) Compressor inlet air at 59 ºF and 29.92 Hg. 
   (2) No aircraft accessory loads or optional air extraction. 
   (3) 100% air intake recovery corrected from the datum air intake system defined by drawing 
 ATF 16471 or approved alternatives. 
   (4) Engine exhaust system defined by Common Nozzle Assembly RX95432-7 and Spacer 
 Ring RX95425 
   (5) Turbine gas temperature and rotor speed limitations are not exceeded. 
 
B. Equivalent Bare Engine Thrust (LBF) 
 The equivalent bare thrust (lbf) is rated th rust excluding the losses of propulsion fan duct 
 And thrust reverser and jet pipe washed by the fan stream. 
 
 
NOTE 2. MAXIMUM PERMISSIBLE ENGINE ROTOR SPEEDS (%) 
 
 100% HP  =   13,300  RPM 
 100% IP    =   9,100  RPM 
 100% LP   =   3,900  RPM 
 
Maximum takeoff (5 minutes) (See NOTE 18) 
 
 HP  97.4 % 
 IP  99.4 % 
 LP  92.5 %

E00066NE Page 4 of 7  
 
 
NOTE 2. (continued) Maximum overspeed (20 seconds) 
 
 HP  (non-declared) 
 IP  (non-declared) 
 LP  (non-declared) 
 
Maximum reverse thrust (30 seconds) 
 
 LP  69.0% 
 
NOTE 3. MAXIMUM PERMISSIBLE TEMPERATURES 
 
TURBINE GAS TEMPERATURE (TGT)  ºC 
 
Starting 
   Below 50% N3 (ground starting)  700  max. during start or  relight 
   Below 50% N3 (inflight starting)  850 
   Above 50% N3    850 
   Takeoff (5 minutes)   900 may be used up to 10 minutes in the event 
     of engine failure 
   Maximum continuous (unrestricted)  850 
   Overtemperature (20 seconds)  920 
 
Oil 
Combined scavenge temperature (ºC) 
 Minimum for starting 
  for engines incorporating Modification Bulletin 79-E065 -40 
  for engines incorporating Modification Bulletin 79-D327 -20 
 Minimum for opening up  20 
 Maximum for unrestricted use  196 
 
 
NOTE 4. FUEL AND OIL PRESSURE LIMITS 
 
Fuel 
MINIMUM FUEL PRESSURE 
Between sea-level and 41,000 feet, not less than 5 psig plus true fuel vapor pressure, measured at 
inlet to engine LP fuel pump. 
 
Oil 
Minimum oil pressure 
   Ground idle to 70% HP rpm   25 psig 
   Above 95% HP rpm   40 psig 
 
 
NOTE 5. MAXIMUM PERMISSIBLE COMPRESSOR AIR BLEEDS 
 
Air delivery for aircraft services, excluding  powerplant anti-icing.  The air is automatically 
scheduled from the engine HP stage 1 and HP stage 6 compressor bleed ports via two valves in the 
aircraft ducting, which select the appropriate supply in response to signals sensing HP compressor 
delivery pressure (P30) together with a synthesized  HP compressor delivery temperature (T30Syn). 
 
With valve controller 6853A020000X5 the switchover from the HP6 to the HP1 compressor 
delivery port occurs at engine power settings where the following conditions are met: 
 
A. Out of icing conditions:  When both the HP C delivery static pressure (P30S) is greater 
than  (105 psi ± 5) gauge. 
 
B. In icing conditions:  When both the HPC delivery pressure (P30S) reaches 130 psi ± 5) 
gauge and the HPC delivery temperature (T30syn) reaches 375ºC ± 5ºC.

E00066NE Page 5 of 7  
 
 
NOTE 5. (Cont’d) Maximum HP6 bleed (% of gas generator compressor flow);  this bleed decreases linearly between 
the values listed below for the low idle and switchover points. 
 
A. Normal operation: 
 (1)   Low Idle and up to 1190 ºk TET 9.5 
 (2)   At switchover point  4.0 
B. Abnormal (one engine inoperative): 
 (1)   Low idle and up to 1210 ºk TET      16.25 
 (2)  At 1400K TET   7.7 
 (3)   At switchover point  4.6 
 
 
Maximum HP1 bleed (4 of gas generator compressor flow);  this bleed (HP1) decreases linearly 
between the values listed below for the switchover and 1700ºk TET. 
 
A. Normal operation: 
 (1)   At switchover point  4.0 
 (2)   Up to1700 ºk TET  1.0 
 (3)   At takeoff   1.0 
 
B. Abnormal (one engine inoperative): 
 (1)   At switchover point  7.0 
 (2)   Up to 1700 ºk TET  2.0 
 (3)   At takeoff   2.0 
 
 
Maximum LP bleed (% of fan flow) 
 
A. Normal and Abnormal (one engine inoperative): 
 (1)   From low idle and up to 1130 ºk TET  .53 
 (2)   Above 1650 ºk TET   0.25 
 
Maximum HP3 bleed for powerplant anti-icing (% of HPC inlet flow); this bleed decreases linearly 
between the values listed below for the1000ºk TET and 1600ºk TET points. 
 
A. Normal and Abnormal (one engine inoperative): 
 (1)   From low idle to 1000 ºk TET  1.75% 
 (2)   At 1600 ºk TET and up to takeoff  1.5% 
 
 
NOTE 6. SHAFT POWER EXTRACTION LIMITATIONS 
 
Accessory drive provisions (continuous power as listed may be extracted under all engine operating conditions) 
TORQUE (lb. - in.) MODELS DRIVE ROTATION 
(AS VIEWED 
FROM 
GEARBOX) 
SPEED 
RATIO TO 
HP ROTOR 
SPEED 
CONTINUOUS MAXIMUM 
INSTANTANEOUS 
OVERHANG 
(in. - lb.) 
ALL 
MODELS 
STARTER 
 
IDG 
 
HYDRAULIC 
PUMP 
CW* 
 
CW 
 
CW 
.7967 
 
.6807 
 
.3744 
 
 
 
2200 
 
1500 
6360 
 
4505 
 
2000 
290 
 
1300 
 
183 
*   CW = CLOCKWISE 
     CCW = COUNTERCLOCKWISE 
 
 
Max starter torque at 0ft varies with air temperature as follows: 
Air temperature Max torque (lb. - in,) 
-54 
-40 
ISA 
6084 
6077 
5980

E00066NE Page 6 of 7  
 
 
NOTE 7. The Full Authority Digital Engine Controller controls power settings. 
 
NOTE 8. Life limited parts are identified in the Engine manual. 
 
 
NOTE 9. This engine approval includes bare engine plus engine accessories, coolers, filters, harness, and 
instrumentation transmitters as defined in the appropriate RR DIS.  Hydraulic pumps and IDG are 
aircraft supply. 
 
 
NOTE 10. RB211 series manuals under CAA requirements accepted as equivalent to FAR 33.4 and FAR 33.5 
requirements are: 
 
 
MODEL 
RB211- 
OPERATING 
INSTRUCTIONS 
MAINTENANCE 
MANUAL 
INSTALLATION 
MANUAL 
ENGINE 
MANUAL 
 
TRENT 553-61 
TRENT 556-61 
TRENT 556B-61 
TRENT 560-61 
TRENT 553A2-61 
TRENT 556A2-61 
TRENT 556B2-61 
TRENT 560A2-61 
 
OI - TRENT - A340 
OI - TRENT - A340 
OI - TRENT - A340 
OI - TRENT - A340 
OI - TRENT - A340 
OI - TRENT - A340 
OI - TRENT - A340 
OI - TRENT - A340 
 
M - TRENT - A340 
M - TRENT - A340 
M - TRENT - A340 
M - TRENT - A340 
M - TRENT - A340 
M - TRENT - A340 
M - TRENT - A340 
M - TRENT - A340 
 
DNS 62612 
DNS 62612 
DNS 62612 
DNS 62612 
DNS 62612 
DNS 62612 
DNS 62612 
DNS 62612 
 
E - TRENT - A340 
E - TRENT - A340 
E - TRENT - A340 
E - TRENT - A340 
E - TRENT - A340 
E - TRENT - A340 
E - TRENT - A340 
E - TRENT - A340 
 
 
Each of the documents listed below must state that it is approved by the European Aviation Safety Agency (EASA) or, for 
approvals made before September 28, 2003 by the United Kingdom Civil Aviation Authority.  Any such documents including 
those approved under a delegated authority, are accepted by the FAA and are considered FAA approved.  
 • Service bulletins,  
 • Structural repair manuals,  
 • Vendor manuals,  
 • Aircraft flight manuals, and  
 • Overhaul and maintenance manuals.  
 • Technical Variances 
These approvals pertain to the type design only. 
 
NOTE 11. These engines meet the smoke and gaseous emission requirements of Part 34. 
 
 
NOTE 12. The engine is fitted with a Digital Electronic Engine Fuel Control system in which the software 
meets the "critical" standard of RTCA DO-178B. 
 
 
NOTE 13. In icing conditions, the engine may be operated satisfactorily at LP rotor speeds (N1) down to low 
idle.  Minimum corresponding N1 at low idle for these engines is 17.6 percent in flight and 15.4 
percent for ground running. 
 
 
NOTE 14. These engines are fitted with an independent IP and LP spool overspeed governor.  Dispatch with 
this item unserviceable is not permitted. 
 
 
NOTE 15. These engines satisfy the certification base as defined in this Data Sheet when operating with the 
FADEC in reversionary control mode.

E00066NE Page 7 of 7  
 
 
NOTE 16. VARIANTS 
 
RB211 TRENT 553-61  Basic model. 
RB211 TRENT 556-61 and 560-61 Same as basic model except for increased takeoff thrust 
    r a t i n g .  
RB211 TRENT 556B-61  Same as 556-61 model except for increased takeoff thrust 
    ratings at altitude. 
RB211 TRENT 553A2-61  A derivative of the RB211 TRENT 553-61 with  
    improved fuel consumption. 
RB211 TRENT 556A2-61  A derivative of the RB211 TRENT 556-61 with 
    improved fuel consumption. 
RB211 TRENT 556B2-61  A derivative of the RB211 TRENT 556B-61 with 
    improved fuel consumption. 
RB211 TRENT 560A2-61  A derivatiave of the RB211 TRENT 560-61 with 
    improved fuel consumption. 
 
 
NOTE 17. The RB211 TRENT 500 series engines have been approved to operate with certain faults present in 
the control system, based on satisfaction of FAR 33 requirements and appropriate FAR 25 control 
system reliability requirements. 
 
The following criteria exist as dispatch and maintenance requirements for the engine control 
system. 
 
Fault Class 1 Level A:  No dispatch allowed 
 
Fault Class 1 Level B:  Dispatchable; maximum operating interval for Fault  
    Class 1 Level B fault(s) is 300 operating hours 
 
Fault Class 2:   Dispatchable; ma ximum operating interval for Fault  
    Class 2 fault(s) is 500 operating hours 
 
Fault levels Class 1 and 2 constitute Rolls-Royce nomenclature.  The airframe manufacturers may 
use different nomenclature in adapting these fault categories to the aircraft maintenance and display 
systems; however, the maximum operating intervals are restricted as shown above. 
 
NOTE 18. The takeoff rating and its associated operating limitations may be used for up to 10 minutes in the 
event of engine out contingency, but their use is otherwise limited to no more than 5 minutes. 
 
---END---
```

## ADs (23, in force first)

- [AD 2017-19-16](https://openairdocs.org/ad/2017-19-16): Turbine Engine Compressor Section · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Oct 13, 2017
- [AD 2017-03-03](https://openairdocs.org/ad/2017-03-03): Engine Oil Cooler · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Mar 17, 2017
- [AD 2015-02-20](https://openairdocs.org/ad/2015-02-20): Intermediate-pressure compressor (IPC) rotor shaft · Rolls-Royce RB211-Trent 875-17, RB211-Trent 877-17, RB211-Trent 884-17 and 22 more. Effective Mar 11, 2015
- [AD 2014-13-03](https://openairdocs.org/ad/2014-13-03): Electronic engine control (EEC) software · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Jul 14, 2014
- [AD 2013-23-12](https://openairdocs.org/ad/2013-23-12): Low-pressure (LP) compressor fan blade set · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Dec 11, 2013
- [AD 2013-19-21](https://openairdocs.org/ad/2013-19-21): Cracks in the HP compressor stage 1 and 2 disc posts · Rolls-Royce RB211-524G2-T-19, RB211-524G3-T-19, RB211-524H-T-36 and 19 more. Effective Nov 6, 2013
- [AD 2011-13-04](https://openairdocs.org/ad/2011-13-04): RH fuel manifold · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Jul 11, 2011
- [AD 2010-07-01](https://openairdocs.org/ad/2010-07-01): Aircraft fuel system · Rolls-Royce RB211-Trent 884B-17, RB211-Trent 892B-17, RB211-Trent 895-17 and 15 more. Effective May 3, 2010
- [AD 2008-25-01](https://openairdocs.org/ad/2008-25-01): Low-pressure turbine (LPT) discs · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Dec 17, 2008
- [AD 2008-23-04](https://openairdocs.org/ad/2008-23-04): Intermediate pressure (IP) turbine blade · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Dec 1, 2008
- [AD 2008-11-16](https://openairdocs.org/ad/2008-11-16): Intermediate pressure compressor (IPC) drums · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Jul 7, 2008
- [AD 2006-05-01](https://openairdocs.org/ad/2006-05-01): Oil filler cap assembly · Rolls-Royce RB211-Trent 884B-17, RB211-Trent 892B-17, RB211-Trent 895-17 and 15 more. Effective Mar 16, 2006
- [AD 2006-03-14](https://openairdocs.org/ad/2006-03-14): High pressure-and-intermediate pressure (HP-IP) turbine oil vent tubes · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Feb 24, 2006
- [AD 2006-03-03](https://openairdocs.org/ad/2006-03-03): HPT rear seal plate locking plugs · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Feb 16, 2006
- [AD 2004-05-30](https://openairdocs.org/ad/2004-05-30): Time Limits Manual · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Apr 2, 2004
- [AD 2013-15-10](https://openairdocs.org/ad/2013-15-10) (historical): Cracking on the IP compressor rotor shaft rear balance land · Rolls-Royce RB211-Trent 875-17, RB211-Trent 877-17, RB211-Trent 884-17 and 22 more. Effective Oct 8, 2013
- [AD 2013-05-18](https://openairdocs.org/ad/2013-05-18) (historical): Fuel tubes and fuel tube clips · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Apr 5, 2013
- [AD 2012-10-12](https://openairdocs.org/ad/2012-10-12) (historical): Compressor rotor shafts · Rolls-Royce RB211-Trent 875-17, RB211-Trent 877-17, RB211-Trent 884-17 and 15 more. Effective Jun 29, 2012
- [AD 2012-04-13](https://openairdocs.org/ad/2012-04-13) (historical): HP compressor stage 1 and 2 disc posts · Rolls-Royce RB211-524G2-T-19, RB211-524G3-T-19, RB211-524H-T-36 and 19 more. Effective Apr 11, 2012
- [AD 2012-02-04](https://openairdocs.org/ad/2012-02-04) (historical): Engine fuel leaks · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Feb 24, 2012
- [AD 2011-09-07](https://openairdocs.org/ad/2011-09-07) (historical): High-pressure compressor (HPC) Stage 1 and 2 disc posts · Rolls-Royce RB211-524G2-T-19, RB211-524G3-T-19, RB211-524H-T-36 and 19 more. Effective Jun 7, 2011
- [AD 2008-18-08](https://openairdocs.org/ad/2008-18-08) (historical): IP Compressor rotor · Rolls-Royce RB211-Trent 884B-17, RB211-Trent 892B-17, RB211-Trent 895-17 and 14 more. Effective Oct 14, 2008
- [AD 2007-19-10](https://openairdocs.org/ad/2007-19-10) (historical): Intermediate Pressure Compressor (IP Compressor) Drums · Rolls-Royce RB211 Trent 553-61, RB211 Trent 553A2-61, RB211 Trent 556-61 and 5 more. Effective Oct 3, 2007

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
