# TCDS E15EU: Rolls-Royce Deutschland Ltd & Co KG - Type: Type certificate data sheet - Status: Historical - Holder: Rolls-Royce Deutschland Ltd & Co KG - Revision: 2 - Revised: May 2, 2022 - Product: Engine - Certification basis: Part 21, Part 33 - Registered aircraft: 4, by the registry models matched to it (OpenAirDocs) - Data sheet PDF: https://openairdocs.org/files/sha256/97/68/9768bc8d70f809681a50fa98dc746d56dd73cb7729ae32ec9eddcf0729e1ee80 - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/0E36602CD3A9823D8625847E005DC966.0001 - Page: https://openairdocs.org/tcds/E15EU ## Models (1) As the data sheet lists them. - Viper Mk. 601-22 ## What the data sheet says This is OCR from the scanned FAA data sheet. OCR can misread letters and numbers. ```text DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION EISEU ROLLS-ROYCE, Deutschland Lid. & Co. KG Rev 2 Viper Mk. 601-22 This Type Certificate ElSEU has been surrendered by TC Holder on May 2, 2022. April 25. 2019 TYPE CERTIFICATE DATA SHEET NO. EISEU Engines of models described herein conforming with this data sheet (which is a part of Type Certificate No. E15EU). and other approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in accordance with pertinent aircraft data sheets and applicable portions of the FAA Regulations provided they are installed. operated and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. TYPE CERTIFICATE (TC) HOLDER: Rolls-Royce, Deutschland Ltd. & Co. KG, Eschenweg 11, 15827 Blankenfelde-Mahlow, Germany TYPE CERTIFICATE (TC) RECORD: Rolls-Royce, Limited, Bristol Engine Division transferred TC E15EU to Rolls-Royce, Deutschland on February 21, 2019 Model Viper Type Turbojet 8 stage axial compressor, annular combustion chamber incorporating a vaporizing combustion system, two stage turbine. Rating (static thrust at sea level, Ib; See NOTE 5) Takeoff (5 min.) 3675 Maximum Continuous 3675 Fuel Controls Barometric flow control Rolls-Royce (1971) BFC 801 Air-fuel ratio control Lucas Type AFC. 123 Fuel Pump Lucas MGBB 161 Fuel See NOTE 7 Oil Castrol 98 (See NOTE 8) Oil Capacity (Total/Usable) 15.6/10.8 (U.S. pints) Principal Dimensions, Ins. Length. (Including nose bullet) 113.91 32.15 28.8 Weight (dry)Ib. Basic engine, including fuel and oil systems, anti-icing system, igniter plugs, accessory drive gearbox and propelling nozzle 810 Installation items supplied by RR (1971), including electrical harness, engine mounting attachment fittings, firewall support, firewire (compressor section), engine nose fairing, tacho generator, blow-off valve solenoid, instrumentation transmitters and slinging attachments 32 (The starter/generator is an aircraft accessory and is excluded from the engine weight) Center of Gravity, in. Forward of mounting trunnion center line Below mounting trunnion center line Ignition (High Energy System) Two igniters Smiths SBS 111 Igniter Unit Rotax C44/TS/4E Page No. 2 3 4 Rev. No. Reformatted 12/94 LEGEND: "--" INDICATES "SAME AS PRECEDING MODEL" • " INDICATES "NOT APPLICABLE" EISEU 2 Certification Basis FAR 21.29 and FAR 33 effective February 1, 1965, as amended by amendments 33-1 through 33-3. Type Certificate No. EISEU, issued August 17, 1972. Effective date of application for type certificate: August 17, 1969. Pursuant to FAR 21.29(a)(1)(ii), Type Certificate E15EU was issued in validation of the British Civil Aviation Authority's certification of compliance with BCAR standards, which were found to provide a level of safety equivalent to the above "Certification Basis", as follows: BCAR Section C, Issue 6, dated June 15, 1966, plus Blue Papers: 415, 435, 436, 464, 468, 474, 476. 480, 481, 482, 499, 506, 544, 550 and 551 (Para. 3.2.2 only). The United Kingdom Civil Aviation Authority originally type certificated this engine. The FAA validated this product under U.S. Type Certificate Number E15EU, Effective September 28, 2003, the European Aviation Safety Agency (EASA) began oversight of this product on behalf of UK. Import Requirements To be considered eligible for installation on U.S. registered aircraft, each new engine to beexported to the United States with Civil Aviation Authority of United Kingdom or EASA airworthiness approval shall have a Joint Aviation Authorities (JAA) or EASA Form 1, Authorized Release Certificate. The JAA or EASA Form I should state that the engine conforms to the type design approved under the U.S. Type Certificate E1SEU, is in a condition for safe operation and has undergone a final operational NOTE 1. Maximum permissible engine operating rotor speeds are as follows: Takeoff, r.p.m. Maximum 13,760 (100%) continuous r.p.m. Momentary 13,760 (100%) overspeed, r.p.m. (20 second 14,170 (103%) limit) NOTE 2. Maximum permissible temperatures are as follows: Jet pipetemperatures Takeoff (5 sec.) 725°C Maximum continuous 715°C Ground idling 550°C Starting (5 sec.) 700°C Oil inlet 145°C Fuel inlet 50°C NOTE 3. Fuel and oil Pressure limits: Fuel Pressure (at filter inlet) Maximum 50 P.S. I. Minimum 10 P.S.I. + true vaporpressure Oil Pressure: Normal 20 -35 psig Maximum 5 psig Minimum 40 psig EISEU NOTE 4. Maximum permissible air bleed extraction: Range of rpm at which air bleed may be used 40% - 100% Maximum air delivery for aircraft services and engine de-icing (% of no bleed mass tlow) 5.5% Maximum bleed excluding engine de-icing 3.0% NOTE 5. The ratings are based on static test stand operation under the following conditions: International Standard Atmospheric Conditions at sea level. All optional air bleeds closed. Aircraft service accessory drives unloaded. Test bed venturi intake to R.R. (1971) Drg. RL.51795/RM.56950. Exhaust cone with 10° angled propelling nozzle together with trimmers as defined in D.I.S. Jet pipe temperature measured by thermocouple harness as defined in D.I.S. Thrust measured with engine angled on test bed to R.R. (1971) Drg. No. RM81236. NOTE 6. The following accessory drive provisions are incorporated: Speed Ratio to Torque (in. Ib.) Overhang Drive Rotation* Turbine Shalt Continuous Static (in. Ib.) Starter Generator .573 230+ 1560 276 A.C. Generator .727 32 580 77 Hydraulic Pump AC .232 177 790 23 Alternator (Tachometer) .305 15 400 9 * Clockwise or Anti-Clockwise looking on the drive face of the accessory. + The maximum torque when the machine is operating as a starter is 820 in. Ib. NOTE 7. The following fuels are eligible for this engine. (Latest issues of specifications). Aviation Kerosene Specifications - British D.Eng.R.D. 2453, 2482, 2494. - Canadian 3-GP-23 - American A.S.T.M. D1655 Jet A or A-1 Aviation Wide-Cut Specifications - British D.Eng. R.D. 2454, 2486. - Canadian 3-GP-22 Wide-Cut - American A.S.T.M. D1655 Jet B NOTE 8. Approval is given for the use of Castrol 98 oil manufactured by Castrol Ltd. to specification D.Eng.R.D. 2487. NOTE 9. Viper 600 series models have the following characteristics and application: Mark 600-22 Basic Model for Hawker-Siddeley 125-600 Series Aircraft: NOTE 10. The only optional additives that may be used in approved fuels are as follows: (a) Anti-corrosion additive, "Santolena C" (HITEC E 515) Not exceeding 14.3 hg/liter with a phosphorous content of approximately 0.06 PPM. (b) Anti-icing additive to specification D.Eng.R.D. 2451 issue 2 (MIL-T-27686E), with and without glycerin, not exceeding 0.15% by volume. (c) Anti-microbiological additive, intermittent use of Biobar JF, per RR Instructions, not exceeding 270 PPM and BORON not exceeding 20 PPM. (d) Anti-static additive Shell ASA 3, not exceeding I PPM by volume. EISEU 4 NOTE 11. Life limited parts are identified in Chapter 5 of Rolls-Royce Viper 601-22 Overhaul Manual. NOTE12. Service Information: Each of the documents listed below must state that it is approved by the European Aviation Safety Agency (EASA) or, for approvals made before September 28, 2003 by CAA (UK). Any such documents including those approved under a delegated authority, are accepted by the FAA and are considered FAA approved. Service bulletins, Structural repair manuals. Vendor manuals, Aircraft flight manuals, and Overhaul and maintenance manuals. Technical Variances These approvals pertain to the type design only. ... END... ``` ## ADs (11, in force first) - [AD 2018-17-08](https://openairdocs.org/ad/2018-17-08): Compressor Section · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 521, Viper Mk. 522 and Viper Mk. 601-22. Effective Sep 25, 2018 - [AD 2018-09-07](https://openairdocs.org/ad/2018-09-07): Engine Oil System (Airframe Furnished) · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 601-22. Effective May 24, 2018 - [AD 2005-07-10](https://openairdocs.org/ad/2005-07-10): 1st stage turbine rotor blades · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 601-22. Effective May 5, 2005 - [AD 98-25-14](https://openairdocs.org/ad/98-25-14): Barometric Flow Control Unit · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 521, Viper Mk. 522, Viper Mk. 526 and 1 more. Effective Feb 12, 1999 - [AD 92-10-07](https://openairdocs.org/ad/92-10-07): High Pressure Compressor (HPC) Rotor Disks · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 521, Viper Mk. 522 and Viper Mk. 601-22. Effective Sep 21, 1992 - [AD 80-02-05](https://openairdocs.org/ad/80-02-05): Flexible Fuel Hose Assembly · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 601-22. Effective Jan 24, 1980 - [AD 77-13-20](https://openairdocs.org/ad/77-13-20): Fuel Shutoff Valve · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 522 and Viper Mk. 601-22. Effective Aug 1, 1977 - [AD 76-24-05](https://openairdocs.org/ad/76-24-05): Turbine Disc · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 601-22. Effective Dec 14, 1976 - [AD 2016-03-03](https://openairdocs.org/ad/2016-03-03) (historical): Life-limited parts · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 521, Viper Mk. 522 and Viper Mk. 601-22. Effective Apr 14, 2016 - [AD 2013-11-13](https://openairdocs.org/ad/2013-11-13) (historical): Reducing the life of certain critical parts · Rolls-Royce Limited, Bristol Engines Division Viper Mk. 601-22. Effective Jul 15, 2013 - [AD 2004-13-03](https://openairdocs.org/ad/2004-13-03) (historical): First Stage Turbine Rotor Blades · Viper Mk. 601-22. Effective Jul 7, 2004 ## Registered aircraft by registry model (OpenAirDocs) - [Rolls-Royce VIPER MK60122](https://openairdocs.org/engine/rolls-royce-viper-mk60122): 3 aircraft (registry code 54058) - [Rolls-Royce VIPER MK 601](https://openairdocs.org/engine/rolls-royce-viper-mk-601-series): 1 aircraft (registry code 54551) --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.