# TCDS E18NE: Honeywell Aerospace US LLC

- Type: Type certificate data sheet
- Status: Current
- Holder: Honeywell Aerospace US LLC
- Revision: 10
- Revised: March 27, 2026
- Product: Engine
- Certification basis: Part 33
- Registered aircraft: 17, by the registry models matched to it (OpenAirDocs)
- Data sheet PDF: https://openairdocs.org/files/sha256/9f/a0/9fa07df14c7ef9bc79cc1c80e9bc2a0f85926035206c7254263ea954a6d1c1ac
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID190364301020260605180614.0001
- Page: https://openairdocs.org/tcds/E18NE

## Models (6)

As the data sheet lists them.

- TPE331-14F
- TPE331-14HR
- TPE331-14GR
- TPE331-15AW
- TPE331-14B
- TPE331-14A

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
DEPARTMENT OF TRANSPORTATION 
FEDERAL AVIATION ADMINISTRATION 
E18NE 
Revision 10 
 
Honeywell Aerospace US LLC 
(AlliedSignal, Garrett) 
 
 TPE331-14A  
TPE331-14B 
 TPE331-14F 
 TPE331-14GR  
TPE331-14HR 
 TPE331-15AW 
 
 
March 27, 2026           
 
TYPE CERTIFICATE DATA SHEET NO. E18NE 
 
Engine models described herein conforming with this data sheet (which is part of Type Certificate No. E18NE) and 
other approved data on file with the Federal Aviation Administration, meet pertinent aircraft data sheets and 
applicable portions of the Federal Aviation Regulations provided they are installed, operated, and maintained as 
prescribed by the approved manufacturer's manuals and other approved instructions. 
 
TYPE CERTIFICATE (TC) HOLDER:         Honeywell Aerospace US LLC 
       111 South 34th Street 
       Phoenix, AZ 85034 
 
TYPE CERTIFICATE HOLDER RECORD: Honeywell International Inc.  
     111 South 34th Street 
     Phoenix, AZ 85034 
 
TYPE CERTIFICATE HOLDER RECORD: AlliedSignal Inc.  
     111 South 34th Street 
     Phoenix, AZ 85034 
 
TYPE CERTIFICATE HOLDER RECORD: Garrett Turbine Engine Co. 
      111 South 34th Street 
      Phoenix, AZ 85034  
 
Type     Single-shaft engine with two-stage centrifugal compressor, three-stage  
    axial turbine and singular annular combustion chamber. 
 
The letters "A", "F" and "G" indicate clockwise propeller rotation. The letters "B" and "H" indicate 
counterclockwise propeller rotation. The letter "R" indicates automatic power reserve capability. The letter "W" 
indicates water-methanol augmentation capability. 
 
 
Page No. 1 2 3 4 5 6 7 8 9 10 
Revision No. 10 10 10 10 10 9 9 10 10  9

E18NE 2 of 10 
RATING (See NOTES 3, 4, and 18)    
  TPE331-14A   
  TPE331-14B  TPE331-14GR 
  TPE331-14F TPE331-15AW TPE331-14HR 
Maximum Continuous    
SHP          1250          1645        1650 
ESHP          1312          1712        1723 
Output Shaft RPM          1540          1390        1552 
Take off (5minutes)    
SHP           1250          1645        1650 
ESHP           1312          1712        1723 
Output Shaft RPM           1540          1390        1552 
 
Automatic Power Reserve, (APR, 10 minutes) 
  
 SHP                                NA* NA 1650 
  ESHP                                NA NA 1723 
  Output Shaft RPM                                NA NA 1552 
 
⃰ Not Applicable (NA) 
 
PRINCIPLE DIMENSIONS PF BASIC ENGINE 
Refer to the Installation Drawings for each specific engine model configuration for dimensions and center of gravity 
location. 
 
WEIGHT  
MODEL  Weight, dry, lbs. 
TPE331-14A 581 
TPE331-14B 592 
TPE331-14F 620 
TPE331-14GR 620 
TPE331-14HR 633 
TPE331-15AW 159 
 
The engine weights shown herein are those of the engine assemblies. Not included are Engine Parts List, or 
Engine Equipment List items coded "A" together with their attaching hardware (See Note 12). 
 
PRINCIPLE OUTPUT SHAFT SPEED RATIO  
MODEL  Propeller-shaft to engine rotor ratio 
TPE331-14A 1:22.6546 
TPE331-14B 1:22.6794 
TPE331-14F 1:22.6546 
TPE331-14GR 1:22.9671 
TPE331-14HR 1:22.9285 
TPE331-15AW 1:25.1108 
 
FUEL 
 Engine operation is approved with the following aviation turbine fuels:  
 Honeywell Aerospace US LLC EMS53111 (Type A)  
 Honeywell Aerospace US LLC EMS53112 (Type A-1)  
 Honeywell Aerospace US LLC EMS53112 (British D. Eng. R.D. 2494 Issue 7) 
 Honeywell Aerospace US LLC EMS53113 Class A (British D. Eng. R.D. 2386 Issue 8)

E18NE 3 of 10  
 Honeywell Aerospace US LLC EMS53113 (Type A, JP-4 and Class B-Type B)  
 Honeywell Aerospace US LLC EMS53116 (Type JP-5) 
 
Other approved fuels are listed in the Installation Manual (IM)-3500 for -14A, -14B, IM-7364 for TPE331-14F,  
IM-6350 for TPE331-15AW and IM-7544 for TPE331-14GR, -14HR. Fuels not containing anti-icing inhibitors may 
have MIL-DTL-85470 Fuel System Icing Inhibitor, or an equivalent inhibitor, added, but not in excess of 0.15 percent 
by volume. 
 
Aviation gasoline MIL-G-5572D, Grade 80/87, not in excess of 1,000 gallons per 100 hours of operation, may be used 
for emergency fuel operation. Aviation gasoline MIL-G-5572D, Grade 100/130, not in excess of 250 gallons per 100 
hours of operation, may be used for emergency fuel operation. Total usage must be limited to 7,000 gallons during 
any 3,000-hour period. If combinations of the above aviation gasolines are used, the following formula is required for 
establishing proportions of combinations during any 3,000-hour period: 
 
 Amount of Grade 100/130 (low lead. gal.) + Amount of Grade 80/87 gal. < 1.0 
   7, 000 gal.   30,000 gal. 
 
If 25 percent or more of aviation gasoline is used at any time, one quart of aviation grade oil must be added to the 
mixture for 100 gallons of aviation gasoline. 
 
Shell ASA-3 anti-static additive, or equivalent, in amounts to bring the fuel up to 300 conductivity units may be used, 
but in no event shall the additive exceed 1 ppm. 
 
Biobor JF Biocide (Sohio or equivalent) 270 ppm maximum (20 ppm of elemental boron) may be used in the fuel for 
pesticide purposes. 
 
OIL 
Oils conform to Honeywell Aerospace US LLC Specification EMS 53110 (Type I and Type II). 
 
CERTIFICATION BASIS 
14 CFR part 33 dated February 1, l965 and Amendment 1, 2, 3, 4, 5, 6, 7, 8 and 9 exemption No. 82-ANE-004-E 
dated December 23, 1982. 
 
Model Part 23 Certification 
Basis 
Date of Application  Date of 
Issuance/Amended 
TPE331-14A *as stated above 10/5/1981 4/26/1984 
TPE331-14B * 10/5/1981 4/56/1984 
TPE331-15AW * 7/6/1984 12/5/1988 
TPE331-14F * 5/3/1988 5/24/1989 
TPE331-14GR *  7/26/1989 7/13/1992 
TPE331-14HR *  7/26/1989 7/13/1992 
 
 
PRODUCTION BASIS 
Production Certificate No. 413 issued March 4, 1965. Reissued Production Certificate No. 413NM to Honeywell 
Aerospace US LLC on March 29, 2026.

E18NE 4 of 10 
NOTE 1:   MAXIMUM PERMISSIBLE TEMPERATURES 
 
Exhaust gas temperature, deg F (deg C) 
 
     TPE331 Engine Model 
-14A, -14B 
 
 
 
 
 
 
 
The above APR, Takeoff and Maximum Continuous exhaust gas temperatures are for uninstalled U.S. Standard sea-
level conditions. Exhaust gas temperature will vary as a function of ambient conditions, engine operating speed and 
installation effects. Consult Installation Manual IM-3500 for TPE331-14A, -14B, IM-7364 for TPE331-14F, 
IM-6350 for TPE331-15AW or IM-7544 for TPE331-14GR, -14HR for other than standard day sea-level limits. (See 
NOTE 13). 
     TPE331-14A, -14B, -14F 
        
       -15AW  14GR/HR 
  Exhaust gas temperature 
during starting deg F (deg C) for 5 seconds   1429 (776) 1607 (875)   
   
See IM for more complete operating limits and actions if above temperature is exceeded 
 
Oil temperature, deg F (deg C) Condition 
 
 
 
 
 
 
Above 
Hot Oil 
SHP Limit 
Maximum 
 
 
 
 
Hot Oil 
SHP 
Limit 
 
 
Engine 
Model 
 
 
 Oil Type 
 
 
Starting 
(Minimum) 
 
 
Ground Idle 
(Maximum) 
Above Ground 
Idle to Hot oil 
SHP Limit 
(Range for 5 
minutes) 
All MIL-PRF-7808 -40 (-40) 200 (93) 175-200 (79-93) 175 (79) 1000 
All MIL-PRF-7808 -40 (-40) 230 (110) 187-215 (86-
102) 
187 (86) 1000 
TPE331-14A MIL-PRF- 23699 -40 (-40) 260 (127 230-260 (110-
127) 
230 (110) 1000 
TPE331-14B " " " " " " 
TPE331-14F " " " " " " 
TPE331-14GR " " " " " 1500 
TPE331-14HR " " " " " " 
TPE331-15AW " " 230 (110) 230 (110) Max N/A 1650 
 
 
Ambient Air Temperature, deg F (deg C) 
      Starting   Operation 
Minimum                                                  -65 (-54)                                      --- 
Maximum                                                  131 (55)                                 131 (55) 
 
Maximum Continuous -14F, -15AW 
1134 (612) 
-14GR, -14HR 
1159 (626) 
See Notes 14 & 18A 
Takeoff (5 minutes) 1134 (612) 1122 (605) 
Automatic Power Reserve (APR) Not Applicable 1191 (644) 
(See Note 18B)

E18NE 5 of 10  
Engine External Components Surface Temperature Limits 
See Installation Manual IM-3500 for TPE331-14A, -14B, IM-7364 for TPE331-14F, 
IM-6350 for TPE331-15AW and IM-7544 for TPE331-14GR, -14HR 
 
 
NOTE 2: Pressure Limits 
 
TPE331 Engine Model 
 
 
Fuel pump inlet pressure 
-14A, -14B, -14F 
 See IM 
   -14GR, -14HR 
See IM 
    -15AW 
See IM 
Oil pressure at inlet connection to the 
engine, minimum 
 
     5 psia 
 
  5 psia 
 
  5 psia 
Oil operating pressure at ground idle 
(Minimum at 65 percent speed) 
     15 psig  15 psig   15 psig 
Normal oil operating range (95 to 100 
percent speed) 
   35 to 70 psig 
 
         (130 to 230F 
 45 to 75 psig 
 
 (122 to 230F 
  45 to 75 psig 
 
 (130 to 230F 
        oil temp.)       oil temp.)      oil temp.) 
 
 
Minimum water-methanol augmentation                7psig                          7psig                                7psig 
Manifold inlet pressure (TPE331-14GR,           (See NOTE 17)         (See NOTE 17)               (See NOTE 17) 
OTE14HR, & -15AW). 
 
 
NOTE 3:     The engine ratings are based on:  
  Dynamometer operation at U.S. Standard Atmosphere, Sea-Level Static Conditions. 
  Honeywell Aerospace EMS53111 aviation turbine fuel Type A with lower heating value of 18,400 
  BTU per pound. MIL- PRF-23699 Type II 
  No bleed-air extraction 
  No anti-icing airflow. 
  No external accessory loads 
  Zero inlet loss. 
  Exhaust gas discharging to ambient-static pressure through the turbine exhaust diffuser furnished  
  with the engine. 
 
NOTE 4:       Equivalent horsepower (ESHP) for static conditions is based on:  
   
  ESHP = Net thrust, pounds + SHP 
               2.5

E18NE 6 of 10 
NOTE 5:       ACCESSORY PROVISIONS 
       TPE331 Engine Model 
Rotation (facing drive pad CCW 
RPM at 100% engine speed  4010 4014 4087 4080 
Maximum torque (lb.-in)      
Tc, continuous torque 300     
To, overload torque 375     
Ts, static torque 1,650     
Overhung moment (lb.-in) 100     
Speed ratio, drive to engine 
rotor 
 0.11488 0.11488 0.11466 0.11466 
 
 (b) Starter, Starter-Generator All Models -14A -14B -14F -15AW -14GR -14HR 
 
Type of Drive:   AS468      
(one each)   Type AV-1 
 
Drive Modifications  Rotations 
     RPM 
     Tc, To, Ts 
 
Rotation (facing Drive pad)    CCW 
 
RPM at 100% engine speed     11,881  11,894   11,881,  11,885  12,115     12,095 
    
Maximum torque (lb-
in) 
  
Tc, continuous torque 132 
To, overload torque 265 
Ts , static torque 
 
2,200  
 
6,300⃰ 
 
 
 6,300⃰ 
 
 
  500 
 
        
  500 
 
 
600 
 
 
600 
Overhung moment 
(lb.in) 
 
       
Speed ratio, drive to 
engine rotor  0.34054 0.34054   0.34054 0.34054 0.33989 0.33989 
      
*Maximum overhung moment allowed at 1g when starter generator is restrained to engine casing. 
 
 
  All -15AW    
(a) Aircraft Accessory Models -14A, -14F -14B -14GR -14HR 
Type of Drive: (one each)      
AS961-1CT  X X   
AND 20001 Type XI-B    X X 
Drive Modifications:  Rotation, Ts, To, 
Stud pattern 
rotated 37 deg. 
 Rotation Tc,  
Stud pattern 
rotated 37 deg.

E18NE 7 of 10  
NOTE 5.   ACCESSORY PROVISIONS – CONTINUED 
 
      TPE331 Engine Model 
            
    All Models     -14A, -14F, -15AW       -14B         -14GR      -14HR 
(c)   Propeller Governor  AND20010                               
Type of Drive: (one each)  
 
Drive Modifications  Rotation, RPM Stud 
    length & negative torque 
    system supply port   
 
Rotation (facing Drive pad) CCW 
 
RPM at 100% engine speed      3739             3743 3807     3801 
 
Maximum torque (lb.-in) 
     Tc, continuous torque  125 
     To, overload torque  188 
     Ts, static torque  825 
 
Overhung moment (lb.-in)              125 
 
Speed ratio, Drive to engine rotor 0.10714 
 
(d)     Propeller Pitch Control 
 
Type of Drive: (one each)               Mounting pad provides overhung 
                 overhung moment of 30 in-lb. 
 
(e) Auxiliary Aircraft Accessory                 TPE331-15AW   TPE331-14F 
 
Type of Drive: (one each)                             AND20002   AND20002 
                 Type XII D   Type XII D 
                                                                       Modified                   Modified 
 
Drive modifications:                                     Rotation, RPM    Rotation, RPM 
                                                                      Tc, To, Ts &                              Tc, To, Ts & 
                                                                      Stud pattern rotated 30 deg.    Stud pattern rotated 30 deg. 
 
Rotation (facing drive pad) 
RPM at 100% engine speed 
              CCW 
             12,254 
           CCW 
           12,511 
 
Maximum torque (lb.-in)   
       Tc, continuous torque                   309                300 
       To, overload torque                   463                463 
       Ts, static torque                  1700               1700 
Overhung moment (lb.-in)                    500                 500 
Speed ratio, Drive to engine rotor               0.35107            0.35844

E18NE 8 of 10 
 
NOTE 6:     Maximum allowable propeller shaft torque as sensed by the torque sensor, in pound -feet: 
 
 TPE331-14A, 
-14B, -14F TPE331-15AW 
TPE331-14GR, 
-14HR 
 
5-minute torque limit: 
4262 6234 5584 
Maximum continuous torque 
limit: 
4262 6234 5584 
    
See IM for transient engines 
over torque limits. 
   
    
NOTE 7:       Propeller Output Shaft (Bolted Flange) Maximum Speed Percent (RPM): 
 
 TPE331-14A, 
14B, 14F TPE331-15AW 
TPE331-14GR, 
-14HR 
Normal operation 100.0(1540) 100.0(1390) 100.0(1552) 
Continuous operation 101.0(1555) 101.0(1404) 101.0(1568) 
Transient limit 104.0(1602) 104.0(1446) 104.0(1614) 
 
NOTE 8:         Propeller Output Shaft, (Bolted Flange) Direction of Rotation: 
 
 TPE331-14A, 
-14B, -14F 
TPE331-14GR, 
-14HR 
Rotation when looking 
forward to turbine exhaust 
flange 
CW CCW 
 
NOTE 9: High Pressure (HP) Compressor discharge bleed air - Up to 12 percent of the engine airflow is available        
for bleed air purposes (except during starting).   Of this 12 percent total, 1.0 percent is used by the engine 
mounted anti-icing system. 
 
NOTE 10: Low Pressure (LP) Compressor interstage bleed air - Up to 10 percent of the engine airflow is available   
as option except total of HP and LP bleed not to exceed quantity allowed for HP bleed. These engines 
meet FAA requirements for adequate turbine disk integrity and rotor blade containment and do not 
require external armoring. 
 
NOTE 11: These engines meet FAA requirements for operation in icing conditions within the envelope defined in  
     Part 25, Appendix C 
 
NOTE 12: Variations in engine configuration and installation components are identified by a suffix to the basic  
model number on the engine nameplate; i.e. TPE331-14A-XY (“X” denotes Honeywell Aerospace 
installed configurations rating code number(s) and “Y” denotes Honeywell Aerospace equipment code 
letter(s) of aircraft manufacturer), and an Engine Parts List or Equipment List number. Certain features of 
these  components are influenced by aircraft design considerations. In the Engine Parts List or 
Equipment List, those items coded "A" have been demonstrated as compatible with the basic engine 
during engine certification testing; however, the operation, functioning and rigging of these in a specific 
aircraft installation must be demonstrated during certification. Subsequent design change to the engine 
associated with these factors is the responsibility of the aircraft manufacturer and must be in compliance 
with Part 33.

E18NE 9 of 10  
 
NOTE 13: The TPE331-14A, -14B, -14F, -14GR, -14HR and -15AW engine have been designed to accommodate a 
“Variable Red Line/Auto-Start" (VRL) temperature indicating system and an automatic "Torque and Gas          
Temperature Limiting" system. The temperature limiting system for these engines will vary with the 
operating condition to produce rated shaft power without exceeding the maximum rated temperature  
    (see Note 3). 
  
 With the VRL inoperative, the EGT limit the TPE331-14A, -14B, -14F, -14GR, -14HR, and -15AW    
engines will vary as a function of ambient conditions. Consult IM for off-standard day EGT limits. 
 
Component interface and installation requirements of the aircraft-installed components are also described     
in IM-3500 for TPE331-14A, -14B model engines, IM-7364 for TPE331-14F engine model, IM-6350 for 
TPE331-15AW model engine and IM-7544 for TPE331-14GR, -14HR model engines. 
 
NOTE 14: Certain engine parts are life limited. These are listed in FAA approved Honeywell International Inc.  
     Honeywell Aerospace US LLC Service Bulletins as follows:  
 
  
NOTE 15: Transient operation of propeller output shaft speed above 104 percent to a maximum of 106.0 percent is 
allowable for fuel control overspeed governor test when the propeller is on the start locks. Refer to 
engine maintenance manual for proper procedures and limitations for this test. 
 
NOTE 16: The power management system incorporates a limited authority IEC (Integrated Engine Computer) that 
limits engine maximum torque and maximum exhaust gas temperature. This device incorporates digital 
circuitry. The software programming procedures have been determined to meet the "critical" category 
under the guidelines of RTCA document DO 178. 
 
NOTE 17: Augmented performance for the TPE331-14GR, -14HR and TPE331-15AW models may be obtained by  
the addition of a water-methanol injection system. Water-methanol mixture must conform to that shown 
in FAA approved installation manual IM-6350 for the TPE331-15AW and IM-7544 for the TPE331-
14GR, -14HR. The torque limit remains as shown in NOTE 6. Exhaust gas temperature limit remains as 
per NOTE 1, except that for IEC-inoperative mode, EGT limits per the appropriate IM must be used. 
 TPE331-14GR, -14HR TPE331-15AW 
SHP at sea level, static, ambient temperature limit 1650 1645 
 
Sea level, static, ambient temperature limit, 
deg F (deg C) 131(55) 100(38) 
 
Minimum Water/Methanol flow rate, lb./hr 
 
1680 
 
1680 
Maximum Water/Methanol flow rate, lb./hr 1850 1850 
 
 
 
 
 
Engine Models Honeywell Aerospace Service Bulletins 
TPE331-14A, -14B TPE331-72-7002 dated February 27, 1995, or later FAA approved revisions 
TPE331-14F TPE331-72-7050 dated June 17, 1994, or later FAA approved revisions 
TPE331-14GR, -14HR TPE331-72-7082 dated April 2, 1999, or later FAA approved revisions 
TPE331-15AW TPE331-72-7502 dated May 17, 1994, or later FAA approved revisions

E18NE 10 of 10 
NOTE 18: 
(a) T
he Continuous Power Reserve (CPR) mode of the IEC provides engine operation with EGT between
1
105oF and 1159oF, inclusive, and meets Part 33 requirements. The CPR mode is available only with
the IEC operational (refer to Installation Manual IM-7544). The torque limit remains as shown in Note
6. Engine operation above 1104oF EGT requires applying engine hour and cycle maintenance factors in
accordance with Engine Maintenance Manuals 72-04-05 and 72-04-07, and Service Bulletins TPE
331-72-7081 dated December 22, 1995, and TPE331-72-7082 dated December 22, 1995. The use of
CPR mode in an aircraft installation must be certified per Part 23 or 25 requirements (refer to Note 12 -
items coded "A").
(b) The Automatic Power Reserve (APR) feature of the IEC is a 10-minute emergency power rating which
automatically increases engine power and the VRL temperature in the event of power loss in 
another engine. The torque limit remains as shown in NOTE 6.
-
--------------------------END--------------------------
```

## ADs (4, in force first)

- [AD 2011-18-51 R1](https://openairdocs.org/ad/2011-18-51-R1): Main shaft bearing · Honeywell International TPE331-1, TPE331-10, TPE331-10A and 82 more. Effective Oct 19, 2011
- [AD 96-06-11](https://openairdocs.org/ad/96-06-11): Engine Compressor Components · Honeywell International TPE331-14A, TPE331-14B, TPE331-14F and 1 more. Effective May 28, 1996
- [AD 93-15-11](https://openairdocs.org/ad/93-15-11): Propeller Pitch Control (PPC) Gasket · Honeywell International TPE331-1, TPE331-10, TPE331-10A and 58 more. Effective Sep 7, 1993
- [AD 2011-18-51](https://openairdocs.org/ad/2011-18-51) (historical): Main shaft bearing · Honeywell International TPE331-1, TPE331-10, TPE331-10A and 82 more

## Registered aircraft by registry model (OpenAirDocs)

- [Honeywell TPE331-14GR](https://openairdocs.org/engine/honeywell-tpe331-14gr): 12 aircraft (registry code 33864)
- [Garrett TPE331-14F](https://openairdocs.org/engine/garrett-tpe331-14f): 2 aircraft (registry code 29112)
- [Garrett TPE331-14A](https://openairdocs.org/engine/garrett-tpe331-14a): 1 aircraft (registry code 29110)
- [Garrett TPE331-14B](https://openairdocs.org/engine/garrett-tpe331-14b): 1 aircraft (registry code 29111)
- [Honeywell TPE331-14A](https://openairdocs.org/engine/honeywell-tpe331-14a): 1 aircraft (registry code 33861)
- [Alliedsign TPE331-14A](https://openairdocs.org/engine/alliedsign-tpe331-14a): 0 aircraft (registry code 02635)
- [Alliedsign TPE331-14B](https://openairdocs.org/engine/alliedsign-tpe331-14b): 0 aircraft (registry code 02636)
- [Alliedsign TPE331-14F](https://openairdocs.org/engine/alliedsign-tpe331-14f): 0 aircraft (registry code 02637)
- [Alliedsign TPE331-14GR](https://openairdocs.org/engine/alliedsign-tpe331-14gr): 0 aircraft (registry code 02638)
- [Alliedsign TPE331-14HR](https://openairdocs.org/engine/alliedsign-tpe331-14hr): 0 aircraft (registry code 02639)
- [Alliedsign TPE331-15AW](https://openairdocs.org/engine/alliedsign-tpe331-15aw): 0 aircraft (registry code 02640)
- [Garrett TPE331-14GR](https://openairdocs.org/engine/garrett-tpe331-14gr): 0 aircraft (registry code 29113)
- [Garrett TPE331-14HR](https://openairdocs.org/engine/garrett-tpe331-14hr): 0 aircraft (registry code 29114)
- [Garrett TPE331-15AW](https://openairdocs.org/engine/garrett-tpe331-15aw): 0 aircraft (registry code 29115)
- [Honeywell TPE331-14B](https://openairdocs.org/engine/honeywell-tpe331-14b): 0 aircraft (registry code 33862)
- [Honeywell TPE331-14F](https://openairdocs.org/engine/honeywell-tpe331-14f): 0 aircraft (registry code 33863)
- [Honeywell TPE331-14HR](https://openairdocs.org/engine/honeywell-tpe331-14hr): 0 aircraft (registry code 33865)
- [Honeywell TPE331-15AW](https://openairdocs.org/engine/honeywell-tpe331-15aw): 0 aircraft (registry code 33866)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
