# TCDS E24NE: Pratt & Whitney Division

- Type: Type certificate data sheet
- Status: Current
- Holder: Pratt & Whitney Division
- Revision: 14
- Revised: June 25, 2024
- Product: Engine
- Certification basis: Part 33, Part 34
- Registered aircraft: 131, by the registry models matched to it (OpenAirDocs)
- Data sheet PDF: https://openairdocs.org/files/sha256/77/de/77deb52bb3d140dea678de88affa19a247c1fcc23f9cd67053abbf7932525533
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID130496475220240627165616.0001
- Page: https://openairdocs.org/tcds/E24NE

## Models (16)

As the data sheet lists them.

- PW4060C
- PW4152
- PW4158
- PW4156
- PW4460
- PW4050
- PW4060A
- PW4056
- PW4156A
- PW4160
- PW4060
- PW4062A
- PW4462
- PW4052
- PW4062
- PW4650

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
STATIC THRUST AT SEA LEVEL, LBS 
 
 
MODEL 
 
MAXIMUM 
CONTINUOUS 
TAKEOFF, DRY 
5 MINUTES 
(SEE NOTE 13 & 21) 
PW4050 
PW4052 
PW4056 
PW4056 
PW4060 
PW4060A 
PW4152 
PW4156 
PW4156A 
PW4158 
PW4160 
PW4460 
PW4062 
PW4062A 
PW4462 
PW4060C 
PW4650 
48,120* 
49,820* 
49,530*(B767) 
47,970**(B747) 
50,250* 
50,250* 
49,200** 
49,580** 
49,200** 
49,580** 
49,600** 
51,050** 
50,250* 
47,970** 
51,050** 
50,250* 
48,700* 
50,000*** 
52,200*** 
56,750*** 
56,750*** 
60,000*** 
61,570*** 
52,000***** 
56,000** 
56,000*** 
58,000** 
60,000** 
60,000** 
62,000** 
62,000** 
62,000** 
60,000*** 
51,400**** 
* Flat-rated to 77oF/25oC 
** Flat- rated to 86oF/30oC 
*** Flat- rated to 92oF/33oC 
**** Flat- rated to 95oF/35oC 
***** Flat-rated to 108oF/42oC 
 
           TCDS NUMBER E24NE  
       REVISION:  14 
 
      
 
DATE:  June 25, 2024   
 U.S. DEPARTMENT OF TRANSPORTATION       
      PRATT & WHITNEY MODELS:   
 FEDERAL AVIATION ADMINISTRATION       
      PW4050 PW4062 PW4158 
 TYPE CERTIFICATE DATA SHEET E24NE  PW4052 PW4062A PW4160 
      PW4056 PW4152 PW4460 
       PW4060 PW4156 PW4462 
       PW4060A PW4156A PW4650 
           PW4060C     
 
Engines of models described herein conforming with this data sheet (which is part of Type Certificate Number E24NE) and other 
approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in 
accordance with pertinent aircraft data sheets and applicable portions of the Federal Aviation Regulations, provided they are installed, 
operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. 
 
TYPE CERTIFICATE (TC) HOLDER:   Pratt & Whitney Division 
United Technologies Corporation 
East Hartford, Connecticut  06108 
 
TYPE Axial airflow, dual-spool, turbofan, single-stage fan, 4-stage low-pressure 
compressor, 11-stage high pressure compressor, annular combustor, 2-stage high- 
pressure turbine, 4-stage low-pressure turbine. 
 
RATINGS  (See NOTE 5) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
* 
PAGE 1 2 3 4 5 6 
REV. 14 14 9 13
 
4 14 
 
LEGEND: "- -" INDICATES "SAME AS PRECEDING MODEL" 
"---" NOT APPLICABLE 
NOTE: AL L PAGES ARE REFORMATTED.  SIGNIFICANT CHANGES IF ANY, 
ARE BLACK-LINED IN THE LEFT MARGIN.

TCDS E24NE  PAGE 2  
PW4060/4052/4056/4050/4060A/4062 
4062A//4060C 
PW4152/4156/4156A/4158/4160 
4460/4462/4650 
9.4 + 1.0 
0.7 + 0.5 
0.1 + 0.5 
- - 
0.8 + 0.5 
0.1 + 0.5 left 
 
 
 
 
 
COMPONENTS For information regarding components, refer to the approved parts list. 
 
 
PRINCIPAL DIMENSIONS (inches) 
Length 
Nominal diameter 
Maximum radial projection 
 
153.6 
97.5 
52.8 
 
WEIGHT (DRY) 9,420 POUNDS 
 
Weight of basic engine includes all essential accessories, but excludes starter, 
exhaust nozzle, and power source for the ignition system. 
 
CENTER OF GRAVITY (IN) 
 
Axial:  Engine station 
Vertical:  Relative to engine 
Lateral:  Relative to centerline 
 
FUEL See NOTE 10 
OIL See NOTE 11 
 
CERTIFICATION BASIS FAR 33 effective February 1, 1965, as amended by 33-1 through 33-9, and 
Amendment 33-10 for FARs 33.7/.14/.23/.27/.77/.88/.90/.92/.94 
 
Type Certificate Number E24NE 
 
MODEL 
 
PW4056 
APPLICATION 
 
OCT 26, 1983 
ISSUED 
 
JUL 09, 1986 
PW4156 OCT 26, 1983 JUL 09, 1986 
PW4152 APR 01, 1986 JUL 09, 1986 
PW4052 JUL 09, 1987 OCT 13, 1987 
PW4060 JUN 04, 1987 OCT 21, 1988 
PW4160 JUN 04, 1987 OCT 21, 1988 
PW4460 JUN 04, 1987 OCT 21, 1988 
PW4158 JUL 23, 1987 APR 29, 1988 
PW4050 FEB 24, 1989 OCT 12, 1989 
PW4060A JUN 26, 1989 MAR 30, 1990 
PW4156A MAR 02, 1990 AUG 06, 1991 
PW4062 MAY 04, 1989 JAN 21, 1992 
PW4462 MAY 04, 1989 JAN 21, 1992 
PW4060C JUL 22, 1992 SEP 24, 1992 
PW4650 FEB 24, 1995 MAR 03, 1995 
PW4062A MARCH 22,2002 APRIL 19, 2002 
PW4256:  APPLICATION OCT 26, 1983 / ADDED JUL 09, 1986 / DELETED 
SEP 25, 1986 
 
 
 
 
 
 
 
 
 
PRODUCTION BASIS (All Models) 
The following models comply with 14 CFR part 34, amendment 5A, effective October 23, 
2013: PW4158, PW4060.  
The following model complies with 14 CFR part 34, amendment 7A, effective May 24, 2024: 
PW4062. 
See note 23, for detailed su mmary of the certification basis for fuel ve nting and exhaust 
emissions. 
 
Production Certificate Number 2

TCDS E24NE  PAGE 3  
MAXIMUM PERMISSIBLE OPERATING SPEEDS FOR ENGINE ROTORS (ALSO SEE NOTE 16) 
PW4050/PW4052/PW4152 PW4056/PW4060/PW4060A/W4060C/PW4156/ 
PW4156A/PW4158PW4160/ 
PW4460/PW4462/PW4650 
PW4062 
PW4062A 
 
4,012 
 
10,300 
 
4,012 
 
10,450 
 
4,044 
 
10,450 
 
MAXIMUM PERMISSIBLE TEMPERATURES 
 
For in-flight starts which result in exceedance of the ground start limit, the maximum temperature and 
duration must be recorded for maintenance action, the PW4000 Maintenance Manual. 
 
External engine component maximum limiting temperatures are specified in the Installation and 
Operating Manual, Section 4.3. 
MODELS:  PW 
4050 
MODELS:  PW 
4052 
MODELS:  PW 
4152 
MODELS:  PW 
4056/4156/4156A/ 
4158/4060/4060A/ 
4160/4460/4062/ 
4062A/4462/4060C 
MODELS:  PW 
4650 
 
 
625oC/1157oF 
 
600oC/1112oF 
 
535oC/995oF 
625oC/1157oF 
 
163oC/325oF 
177oC/350oF 
 
 
644°C/1191°F 
 
629°C/1164oF 
 
- - 
640oC/1184oF 
 
- - 
- - 
 
 
644oC/1191oF 
 
619oC/1146oF 
 
- - 
640oC/1184oF 
 
- - 
- - 
 
 
654°C/1209°F 
 
629°C/1164°F 
 
- - 
650°C/1202°F 
 
- - 
- - 
 
 
650°C/1202°F 
 
625°C/1157°F 
 
- - 
650°C/1202°F 
 
- - 
- - 
*Transient operation above 163oC/325oF is limited to 20 minutes. 
 
 
NOTES 
 
NOTE  1. 
 
 
 
 
Low pressure rotor 
N1, RPM) 
High pressure rotor 
N2, RPM) 
 
NOTE  2. 
 
 
 
 
 
 
 
 
 
 
 
 
Turbine exhaust gas 
temperature 
At takeoff (5 min. see 
NOTE 21) 
Max. continuous 
At start-up 
Ground 
In-flight 
Oil outlet temperature 
Continuous 
operation 
Transient operation* 
 
 
NOTE  3. 
FUEL PRESSURE LIMITS: At inlet to engine system pump, not less than 5 psig above the true vapor pressure of the fuel 
and not greater than 70 psig with a vapor/liquid ratio of zero. 
OIL PRESSURE LIMITS: 
Minimum 
 
70 psid 
 
Temporary interruption of oil pressure associated with negative "G" operation is limited to 30 
seconds maximum.  Normal oil pressure will be restored rapidly once the negative "G" effect 
has been eliminated.  There is no maximum oil pressure limit. 
 
 
NOTE  4. 
 
 
MAXIMUM PERMISSIBLE AIR BLEED: 
8TH STAGE BLEED 
 
Idle to 40% Maximum Continuous 
40% Maximum Continuous to Takeoff: 
NORMAL M AXIMUM 
 
0.0 0.0 
6.0 6.0

TCDS E24NE  PAGE 4  
 
15TH STAGE BLEED 
 
Idle to 40% Maximum Continuous 12.0 12.0 
40% Maximum Continuous to Takeoff: 6.0 7.6 
 
NOTE  5. The Sea Level Static Ratings are ideal and are based on ICAO Standard Atmosphere 
conditions, a Pratt & Whitney hardwall bellmouth inlet, no fan or compressor air bleed or 
load on accessory drives, an exhaust system having no internal pressure or external 
scrubbing losses, and fan duct and primary nozzle velocity coefficients equal to 1.0. 
 
NOTE 6. 
 
The following accessory drive provisions are incorporated: 
     TORQUE  (lb-in)   
DRIVE ROTATION SPEED RATIO TO TURBINE SHAFT CONTINUOUS STATIC OVERLOAD OVERHUNG MOMENT (in-lb) 
High pressure rotor              
Starter CCW 0.841:1 --- * --- 500 
IDGS CCW 0.841:1 ** 12,620 ** 2,000 
Fluid power pump (R) CCW 0.389:1 1,300 6,500 1,950*** 400 
Auxiliary fluid power 
pump CCW 0.379:1 1,300 6,500 1,950*** 400 
 LEGEND: CCW = counterclockwise     
         
   
* Maximum starter torque = 910 lb-ft at zero rpm and 1,250 lb-ft maximum impact torque.  
Maximum allowable starter torque value is 1,498 lb-ft. 
         
   
** Maximum allowable continuous torque values are equivalent to 175 horsepower at any 
engine speed at or above sea level idle.  The following overload conditions can be 
accommodated: 
         
   HORSEPOWER DURATION TIME RECURRING TIME   
   225 5 minutes 1,000 hours    
   225 5 seconds 1 hour    
   450 5 seconds 1,000 hours    
         
   
** For engines operating without an Auxiliary Fluid Power Pump, the maximum allowable 
continuous torque values are equivalent to 222 horsepower at any engine speed at or above 
sea level idle.  The following overload conditions can be accommodated: 
         
   HORSEPOWER DURATION TIME RECURRING TIME   
   295 5 minutes 1,000 hours    
   295 5 seconds 1 hour    
   500 5 seconds 1,000 hours    
         
   *** Maximum allowable for 5-minute duration recurring at four hour intervals minimum. 
 
NOTE  7. Power setting, power checks, and control of engine output in all operations are to be based upon Pratt & 
Whitney engine charts referring to either turbine discharge section gas pressure or low rotor speed.  
Pressure probes and a low rotor speed sensor are included in the engine assembly for this reason. 
NOTE  8. For inflight operation during icing conditions, the minimum allowable fan speed (N1) is 20% (720 rpm).

TCDS E24NE  PAGE 5  
NOTE  9. Lightning protection requirements and electromagnetic interference omitted by the electronic engine 
control system, including cables, are specified in the Installation and Operating Manual, Section 4.12. 
NOTE  10. Fuel and fuel additives conforming to the latest applicable issue of FAA-approved Pratt & Whitney 
Turbojet Engine Service Bulletin No. 2016 may be used separately or mixed in any proportions without 
adversely affecting the engine operation or power output. 
NOTE  11. The following oils are eligible:  Oils conforming to Pratt & Whitney Turbojet Engine Service 
Bulletin No. 238, latest revision. 
 
NOTE  12. Certain engine parts are life-limited.  Limits are listed in Pratt & Whitney PW4000 Turbofan 
Engine Manuals, Part Nos. 50A443, 50A605 and 50A822, Time Limit Section. 
 
NOTE  13. The engines meet the January 1, 1984, smoke and gaseous emission requirements of SFAR 27. 
The same requirements are now incorporated into Federal Aviation Regulation Part 34, effective 
September 10, 1990. 
 
NOTE  14. The engines meet the January 1, 1975, fuel venting emission requirements of SFAR 27.  The same 
requirements are now incorporated into Federal Aviation Regulation Part 34, effective September 
10, 1990. 
 
NOTE  15. The maximum permissible engine inlet distortion limit is specified in the Installation and Operating 
Manual, Section 4.4, Report PWA-6049. 
 
NOTE  16. Limits regarding transient rotor shaft overspeed rpm and transient gas overtemperature and the 
number of overtemperature occurrences are specified in the Maintenance Documents, Part Nos. 
50A444, 50A606, and 50A823. 
 
NOTE  17. Information regarding approved fuel filter and oil filter replacement parts is in the PW4000 Series 
Illustrated Parts Catalogs, Part Nos. 50A445, 50A607, and 50A824. 
 
NOTE  18. Requirements and limitations associated with automatic fuel system anti-icing are specified in the 
Installation and Operating Manual, section 4.5, Report PWA-6049. 
 
NOTE  19. The PW4000 series engines have been approved to operate with certain faults present in the control 
system based on satisfaction of FAR 33 requirements and appropriate FAR 25 control system reliability 
requirements.  The following criteria exist as dispatch and maintenance requirements for the engine 
control system.  These criteria are specified in Pratt & Whitney Report PWA-6139 and PWA-6139 
Addendum, which defines the various configurations and maximum operating intervals as follows: 
 
Fault Level A: No dispatch allowed 
 
Fault Level B: Dispatchable; maximum operating interval for Fault 
level B fault(s) is 20 days. 
 
Fault Level C: Dispatchable; maximum operating interval for Fault 
level C is 1000 operating hours 
 
Review of EEC fault data from only the most recent 
flight leg is sufficient at the 1000 hour interval except 
for the following EEC part numbers:  P&W P/N 
50D791, 50D824, 51D037, 50D823, 51D319, 
51D586. 
 
Fault Levels A, B, and C constitute Pratt & Whitney nomenclature.  The airframe manufacturers may 
use different nomenclature in adapting these fault categories to the aircraft maintenance and display 
systems.  However, the maximum operating intervals are restricted as shown above. 
 
A control system reliability monitoring program has been established with Pratt & Whitney in 
compliance with the reporting requirements as outlined in the Engine and Propeller Directorate Policy 
letter dated October 28, 1993, for Time Limited Dispatch of Engines fitted with FADEC Systems. 
 
NOTE  20. Incorporation of Pratt & Whitney Service Bulletin PW4ENG 79-43 provides an alternative means of 
compliance with the requirements of FAR 33.71(c)(1). 
 
NOTE  21. The normal 5 minute takeoff time limit may be extended to 10 minutes for engine out contingency. 
 
NOTE  22. Engines in which Engineering Change Number EC92KK322G, H, I, J, and K were incorporated 
during manufacturer are designated by a (-3) on the Engine Data Plate.

TCDS E24NE  PAGE 6  
NOTE  23. The following e missions standards promulgated in 14 CFR Part 34, Am endment 5A, effective 
October 23, 2013, and 40 CFR Part 87, effective October 31, 2012, have been complied with for: PW4158 
with TALON II combustor, and PW4060. 
 
Fuel V enting E mission St andards: 14 CFR §§ 34. 10 (a) and 34. 11; in addition, 40 CFR §§ 87.10(a) and 
87.11. 
 
Smoke Num ber (SN) E mission St andards: 14 CFR §34.21(e)(2); in addition , 40 CFR §  87.23(c)(l). 
 
Carbon Monoxide (CO) E mission St andards: 14 CFR § 34.21(d)(l)(ii); in addition, 
40 CFR § 87.23(c)(l).  
 
Hydrocarbons (HC) E mission St andards: 14 CFR § 34.21(d)(1)(i); in addition, 
40 CFR § 87.23(c)(l). 
 
Oxides of Nitrogen (NOx) Emission St andards: 14 CFR § 34.23(a)(2); in addition, 40 CFR § 87.23(c)(2) 
for PW4060; 14 CFR § 34.23(b)(1); in addition, 40 CFR § 87.23(c)(3) for PW4158 with TALON II 
combustor. 
 
 
In addition to t he F AA's finding of compliance based on the certification requirements defined in this 
TCDS, the engine m anufacturer has declared t hat the ICAO e missions st andards identified in Annex 
16, Volume II, Third Edition, Part III, Chapter 2, Section 2.2.2 for SN , Section 2.3.2 for CO and 
HC, Section 2.3.2.d for NOx (also known as CAEP/6) for PW4060, Section 2.3.2.e  for NOx (also 
known as CAEP/8) for PW4158 with TALON II combustor,  and Part II Chapter  2 for fuel venting for 
PW4158 with TALON II combustor, and PW4060 have also been demonstrated. 
 
 
 
 
The following emissions standards promulgated in 14 CFR Part 34, Amendment 7A, effective May 24, 
2024, and 40 CFR part 1031, effective December 23, 2022, have been complied with for: PW4062. 
 
Fuel Venting Emission Standards: 14 CFR §§ 34.10 (a) and 34.11; in addition, 40 CFR § 1031.30(b)(2). 
 
Carbon Monoxide (CO) Emission Standards: 14 CFR § 34.21(d)(l)(ii); in addition, 40 CFR § 1031.60(d). 
 
Hydrocarbons (HC) Emission Standards: 14 CFR § 34.21(d)(1)(i); in addition, 40 CFR § 1031.60(c). 
 
Oxides of Nitrogen (NOx) Emission Standards: 14 CFR § 34.23(a)(2); in addition 40 CFR § 
1031.60(e)(4). 
 
Non-volatile particulate nvPM mass concentration (nvPMMC): 14 CFR § 34.25(a)(1); in addition 40 
CFR § 1031.60(a)(6). 
 
Non-volatile particulate nvPM mass (nvPMmass) & nvPM number (nvPMnum) : 14 CFR § 34.25(a)(2); 
in addition 40 CFR § 1031.60(b)(2). 
 
In addition to the FAA’s findings of compliance based on the certification requirements defined in this 
TCDS, the engine manufacturer has declared that the ICAO emissions standards identified in Annex 16, 
Volume II, Third Edition, Part II, Chapter 2 for Fuel Venting, Part III, Chapter 2, Section 2.2.2 for SN , 
Section 2.3.2 for CO and HC, Section 2.3.2.d for NOx (also known as CAEP/6) and Annex 16, Volume 
II, Fourth Edition, Amendment 10, effective July 20, 2020, Part III, Chapter 4, Section 4.2.2 for non-
volatile Particulate Matter (also known as CAEP/10 & CAEP/11) have also been demonstrated for 
PW4062. 
 
 
 
                                                                                           ----END----
```

## ADs (43, in force first)

- [AD 2026-21-06](https://openairdocs.org/ad/2026-21-06): Engine Fuel and Control · Pratt & Whitney Division PW4052, PW4056, PW4060 and 10 more. Effective Nov 23, 2026
- [AD 2022-12-12](https://openairdocs.org/ad/2022-12-12): Turbine Section · Pratt & Whitney Division PW4062. Effective Jul 5, 2022
- [AD 2019-06-02](https://openairdocs.org/ad/2019-06-02): Engine Fuel Distribution · Pratt & Whitney Division PW4158. Effective Apr 30, 2019
- [AD 2018-13-02](https://openairdocs.org/ad/2018-13-02): Turbine Engine Combustion Section · Pratt & Whitney Division PW4052, PW4056, PW4060 and 7 more. Effective Jul 20, 2018
- [AD 2016-08-09](https://openairdocs.org/ad/2016-08-09): HPC 10th stage disk · Pratt & Whitney Division PW4050, PW4052, PW4056 and 24 more. Effective Jun 1, 2016
- [AD 2015-22-03](https://openairdocs.org/ad/2015-22-03): LPT 4th stage IAS · Pratt & Whitney Division PW4050, PW4052, PW4056 and 24 more. Effective Dec 1, 2015
- [AD 2012-22-16](https://openairdocs.org/ad/2012-22-16): 3rd stage LPT duct segments · Pratt & Whitney Division PW4050, PW4052, PW4056 and 13 more. Effective Dec 19, 2012
- [AD 2012-14-09](https://openairdocs.org/ad/2012-14-09): 3rd and 4th stage vane fractures · Pratt & Whitney Division PW4050, PW4052, PW4056 and 24 more. Effective Nov 7, 2012
- [AD 2012-18-17](https://openairdocs.org/ad/2012-18-17): HPC drum rotor disk assembly · Pratt & Whitney Division PW4052, PW4056, PW4060 and 16 more. Effective Oct 22, 2012
- [AD 2012-18-03](https://openairdocs.org/ad/2012-18-03): 1st stage HPT air seal rings · Pratt & Whitney Division PW4050, PW4052, PW4056 and 18 more. Effective Oct 11, 2012
- [AD 2012-16-01](https://openairdocs.org/ad/2012-16-01): High-pressure turbine (HPT) stage 1 front hubs · Pratt & Whitney Division PW4052, PW4056, PW4060 and 14 more. Effective Sep 28, 2012
- [AD 2012-06-18](https://openairdocs.org/ad/2012-06-18): Engine · Pratt & Whitney Division PW4050, PW4052, PW4056 and 13 more. Effective Apr 27, 2012
- [AD 2012-04-04](https://openairdocs.org/ad/2012-04-04): fuel metering units (FMUs) · Pratt & Whitney Division PW4050, PW4052, PW4056 and 13 more. Effective Apr 5, 2012
- [AD 2011-25-09](https://openairdocs.org/ad/2011-25-09): PW4000 turbofan engines · Pratt & Whitney Division PW4050, PW4052, PW4056 and 18 more. Effective Jan 10, 2012
- [AD 2010-24-14](https://openairdocs.org/ad/2010-24-14): HPC 10th stage disk · Pratt & Whitney Division PW4050, PW4052, PW4056 and 17 more. Effective Jan 21, 2011
- [AD 2010-24-09](https://openairdocs.org/ad/2010-24-09): No. 3 bearing oil pressure tubes · Pratt & Whitney Division PW4050, PW4052, PW4056 and 34 more. Effective Dec 28, 2010
- [AD 2008-24-13](https://openairdocs.org/ad/2008-24-13): Electronic engine controls (EECs) · Pratt & Whitney Division PW4052, PW4056, PW4060 and 6 more. Effective Jan 8, 2009
- [AD 2005-25-09](https://openairdocs.org/ad/2005-25-09): Engine manufacturer's time limits section (TLS) · Pratt & Whitney Division PW4050, PW4052, PW4056 and 26 more. Effective Jun 12, 2006
- [AD 2003-19-15](https://openairdocs.org/ad/2003-19-15): High-Pressure-Compressor (HPC) Surges · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more. Effective Oct 30, 2003
- [AD 2002-12-15](https://openairdocs.org/ad/2002-12-15): Front Drum Rotors · Pratt & Whitney Division PW4052, PW4056, PW4060 and 6 more. Effective Jul 31, 2002
- [AD 2001-05-07](https://openairdocs.org/ad/2001-05-07): Low Pressure Turbine (LPT) 4th Stage Air Seal · Pratt & Whitney Division PW4052, PW4056, PW4060 and 11 more. Effective Mar 30, 2001
- [AD 99-15-01](https://openairdocs.org/ad/99-15-01): Low Pressure Turbine Disks · Pratt & Whitney Division PW4056, PW4152, PW4156A and 3 more. Effective Sep 14, 1999
- [AD 98-23-08](https://openairdocs.org/ad/98-23-08): High Pressure Compressor  Blade Tips · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more. Effective Jan 12, 1999
- [AD 98-19-03](https://openairdocs.org/ad/98-19-03): High Pressure Turbine Rotating Airseals · Pratt & Whitney Division PW4052, PW4056, PW4060 and 9 more. Effective Nov 9, 1998
- [AD 96-13-08](https://openairdocs.org/ad/96-13-08): AFT Cascade Support Frame Assembly · Pratt & Whitney assembly Part Number 221D5015, Revision A (STC SE744NE). Effective Aug 1, 1996
- [AD 93-08-16](https://openairdocs.org/ad/93-08-16): Fuel Pump · Pratt & Whitney Division PW4050, PW4052, PW4056 and 2 more. Effective Jul 12, 1993
- [AD 93-08-18](https://openairdocs.org/ad/93-08-18): Electronic Engine Control (EEC) · Pratt & Whitney Division PW4152, PW4156 and PW4158. Effective Jul 6, 1993
- [AD 90-22-02](https://openairdocs.org/ad/90-22-02): Low Pressure Turbine Shaft · Pratt & Whitney Division PW4050, PW4052, PW4056 and 6 more. Effective Oct 18, 1990
- [AD 88-03-53](https://openairdocs.org/ad/88-03-53): Fuel Metering Units · Pratt & Whitney Division PW4152. Effective Sep 1, 1989
- [AD 2010-18-13](https://openairdocs.org/ad/2010-18-13) (historical): Blade · Pratt & Whitney Division PW4052, PW4056, PW4060 and 16 more. Effective Oct 18, 2010
- [AD 2003-11-18](https://openairdocs.org/ad/2003-11-18) (historical): High-Pressure-Compressor (HPC) · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more. Effective Jul 7, 2003
- [AD 2002-21-10](https://openairdocs.org/ad/2002-21-10) (historical): High pressure compressor (HPC) · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more. Effective Nov 12, 2002
- [AD 2002-03-08](https://openairdocs.org/ad/2002-03-08) (historical): Time Limits Section of Engine Manuals (EM's) · Pratt & Whitney Division PW4050, PW4052, PW4056 and 25 more. Effective Apr 16, 2002
- [AD 2001-25-11](https://openairdocs.org/ad/2001-25-11) (historical): Compressor Surges · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more. Effective Jan 17, 2002
- [AD 2001-20-13](https://openairdocs.org/ad/2001-20-13) (historical): High Pressure Compressor Front Drum Rotors · Pratt & Whitney Division PW4052, PW4056, PW4060 and 6 more. Effective Nov 16, 2001
- [AD 2001-15-12](https://openairdocs.org/ad/2001-15-12) (historical): High Pressure Compressors (HPC) · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more. Effective Aug 10, 2001
- [AD 2001-09-07](https://openairdocs.org/ad/2001-09-07) (historical): High Pressure Compressor (HPC) Surge · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more. Effective May 14, 2001
- [AD 2000-25-06](https://openairdocs.org/ad/2000-25-06) (historical): Low Pressure Turbine (LPT) 4th Stage Air Seal · Pratt & Whitney Division PW4052, PW4056, PW4060 and 11 more. Effective Dec 29, 2000
- [AD 2000-22-01](https://openairdocs.org/ad/2000-22-01) (historical): High Pressure Compressor Cutback Stator · Pratt & Whitney Division PW4050, PW4052, PW4056 and 6 more. Effective Nov 9, 2000
- [AD 2000-12-02](https://openairdocs.org/ad/2000-12-02) (historical): Critical Life-Limited Part · Pratt & Whitney Division PW4050, PW4052, PW4056 and 24 more. Effective Sep 13, 2000
- [AD 99-17-16](https://openairdocs.org/ad/99-17-16) (historical): Pratt & Whitney Division PW4050, PW4052, PW4056 and 11 more. Effective Sep 24, 1999
- [AD 99-08-15](https://openairdocs.org/ad/99-08-15) (historical): Pratt & Whitney Division PW4050, PW4052, PW4056 and 20 more. Effective May 13, 1999
- [AD 2001-08-52](https://openairdocs.org/ad/2001-08-52) (historical): Multiple-engine power loss due to HPC surges · Pratt & Whitney Division PW4050, PW4052, PW4056 and 12 more

## Registered aircraft by registry model (OpenAirDocs)

- [Pratt & Whitney PW4158](https://openairdocs.org/engine/pratt-whitney-pw4158): 65 aircraft (registry code 52061)
- [Pratt & Whitney PW4056](https://openairdocs.org/engine/pratt-whitney-pw4056): 25 aircraft (registry code 51665)
- [Pratt & Whitney PW4060](https://openairdocs.org/engine/pratt-whitney-pw4060): 14 aircraft (registry code 52140)
- [Pratt & Whitney PW4460](https://openairdocs.org/engine/pratt-whitney-pw4460): 10 aircraft (registry code 51673)
- [Pratt & Whitney PW4462](https://openairdocs.org/engine/pratt-whitney-pw4462): 8 aircraft (registry code 52171)
- [Pratt & Whitney PW4062](https://openairdocs.org/engine/pratt-whitney-pw4062): 6 aircraft (registry code 51674)
- [Pratt & Whitney PW4062A](https://openairdocs.org/engine/pratt-whitney-pw4062a): 2 aircraft (registry code 51675)
- [Pratt & Whitney PW4052](https://openairdocs.org/engine/pratt-whitney-pw4052): 1 aircraft (registry code 51664)
- [Pratt & Whitney PW4050](https://openairdocs.org/engine/pratt-whitney-pw4050): 0 aircraft (registry code 51663)
- [Pratt & Whitney PW4060A](https://openairdocs.org/engine/pratt-whitney-pw4060a): 0 aircraft (registry code 51667)
- [Pratt & Whitney PW4060C](https://openairdocs.org/engine/pratt-whitney-pw4060c): 0 aircraft (registry code 51677)
- [Pratt & Whitney PW4152](https://openairdocs.org/engine/pratt-whitney-pw4152): 0 aircraft (registry code 51668)
- [Pratt & Whitney PW4156](https://openairdocs.org/engine/pratt-whitney-pw4156): 0 aircraft (registry code 51669)
- [Pratt & Whitney PW4156A](https://openairdocs.org/engine/pratt-whitney-pw4156a): 0 aircraft (registry code 51670)
- [Pratt & Whitney PW4160](https://openairdocs.org/engine/pratt-whitney-pw4160): 0 aircraft (registry code 51672)
- [Pratt & Whitney PW4650](https://openairdocs.org/engine/pratt-whitney-pw4650): 0 aircraft (registry code 51678)

## STCs approved under this data sheet (4)

- [STC SE01543CH](https://openairdocs.org/stc/SE01543CH): Replace Hamilton Sundstrand P/N 778839-13, 778839-14, 778839-19, 778839-20, 778839-37, 778839-38, 816682-1, 840618-2, 880724 carbon bushings with Cook Airtomic P/N AIR22947 Slotted Entry Busing in the High Pressure Shutoff Valve.. Cook Airtomic
- [STC SE00053AT-D](https://openairdocs.org/stc/SE00053AT-D): Modification of fan exit guide vane, to line replaceable unit configuration.. Chromalloy Gas Turbine Corp.
- [STC SE00131LA](https://openairdocs.org/stc/SE00131LA): Modification of the subject engines to incorporate an oil tank reservoir insulation blanket in accordance with Hi Temp Insulation Inc. Drawing List 46M1024-301, Revision N/C, dated December 5, 1995, or later FAA approved revision as an acceptable alternate to Pratt & Whitney part number 50R280-01 or 51R059-01 insulation blankets.. Hi Temp Insulation Inc
- [STC SE744NE](https://openairdocs.org/stc/SE744NE): Pratt & Whitney assembly Part Number 221D5015, Revision A, for the wing installation, and Part Number 221D5017, Revision A, for the tail installation.. Pratt & Whitney

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
