# TCDS E25EA: Pratt & Whitney Canada Corp.

- Type: Type certificate data sheet
- Status: Current
- Holder: Pratt & Whitney Canada Corp.
- Revision: 11
- Revised: November 16, 2022
- Product: Engine
- Certification basis: Part 33, Part 21
- Registered aircraft: 208, by the registry models matched to it (OpenAirDocs)
- Data sheet PDF: https://openairdocs.org/files/sha256/e3/9a/e39ac757d1a2352055e814e146846ee65ce5d002c169a3ef1c51c4fa30dca9b8
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID113587127220221118153801.0001
- Page: https://openairdocs.org/tcds/E25EA

## Models (13)

As the data sheet lists them.

- JT15D-1
- JT15D-4
- JT15D-5A
- JT15D-5R
- JT15D-1B
- JT15D-4D
- JT15D-5F
- JT15D-5B
- JT15D-4B
- JT15D-5C
- JT15D-1A
- JT15D-4C
- JT15D-5

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
PAGE  1  2  3  4 5 6 7    LEGEND: "- -" INDICATES "SAME AS PRECEDING MODEL" 
 REV.  11  10 10 10 9 10 11                    "---" NOT APPLICABLE 
 NOTICE:  ALL PAGES ARE REFORMATTED.  SIGNIFICANT CHANGES 
                 ARE BLACK-LINED IN THE LEFT MARGIN. 
 
 
 
U.S. DEPARTMENT OF TRANSPORTATION 
 
FEDERAL AVIATION ADMINISTRATION 
 
TYPE CERTIFICATE DATA SHEET E25EA 
 
 
 
TCDS NUMBER E25EA 
 
REVISION:  11 
DATE:  November 16, 2022  
 
PRATT & WHITNEY CANADA CORP. 
 
MODELS: 
 
JT15D-1     JT15D-4 JT15D-5 
JT15D-1A JT15D-4B JT15D-5A 
JT15D-1B JT15D-4C JT15D-5B 
 JT15D-4D JT15D-5C 
   JT15D-5F 
   JT15D-5R 
 
Engines  of models described herein conforming with this data sheet (which is part of Type Certificate Number E25EA) and other 
approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in 
accordance with pertinent aircraft data sheets and applicable portions of the Federal Aviation Regulations, provided they are installed, 
operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. 
 
TYPE CERTIFICATE (TC) HOLDER: Pratt & Whitney Canada Corp. 
 1000 Marie-Victorin  
 Longueuil, QC Canada J4G 1A1 
 
TYPE CERTIFICATE (TC) RECORD : Pratt & Whitney Canada, Inc. 
 Pratt & Whitney Aircraft of Canada, Ltd..  
 United Aircraft of Canada Ltd. 
 (Name changes of TC Holder) 
 
TYPE JT15D-1 / -1A / -1B: 
 
Twin spool with a single stage fan and centrifugal compressor, three stage turbine, annular reverse-
flow combustor and full-length annular bypass duct. 
 
JT15D-4 / -4B / -4C / -4D / -5 / -5A / -5B / -5C / -5F/-5R: 
 
Twin spool with single stage fan, one axial compressor stage and one centrifugal compressor stage, 
three stage turbine, annular reverse-flow combustor and full length annular bypass duct. 
THRUST RATING, POUNDS 
(See NOTE 15) 
JT15D-1 JT15D-1A JT15D-1B JT15D-4 JT15D-4B JT15D-4C JT15D-4D 
 Maximum continuous at sea level 
 Takeoff (5 min.) at sea level 
2,090 
2,200 
- - 
- - 
- - 
- - 
2,375 
2,500 
- - 
- - 
- - 
- - 
- - 
- - 
 JT15D-5 JT15D-5A JT15D-5B JT15D-5C JT15D-5F JT15D-5R  
 Maximum continuous at sea level 
 Takeoff (5 min.) at sea level 
2,900 
2,965 
- - 
2,900 
- - 
2,900 
3,190 
3,190 
2,900 
2,900 
- - 
2,965 
 
ENGINE SPEED LIMITATIONS 
(rpm) 
JT15D-1 JT15D-1A JT15D-1B JT15D-4 JT15D-4B JT15D-4C JT15D-4D 
 Max steady state low rotor (N1) 
 Max steady state high rotor (N2) 
15,840 
31,120 
16,540 
- - 
- - 
- - 
16,540 
31,450 
16,860 
31,800 
- - 
- - 
16,540 
- - 
 JT15D-5 JT15D-5A JT15D-5B JT15D-5C JT15D-5F JT15D-5R  
 Max steady state low rotor (N1) 
 Max steady state high rotor (N2) 
16,540 
31,450 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- -

TCDS  E25EA  Page 2 of 7   
 
INTERTURBINE 
TEMPERATURE  
øF/øC øF/øC øF/øC øF/øC øF/øC øF/øC øF/øC 
MODELS: JT15D-1 JT15D-1A JT15D-1B JT15D-4 JT15D-4B JT15D-4C JT15D-4D 
 Takeoff (5 min.) (See NOTE 15) 
 Maximum continuous 
 Maximum for acceleration 
 Starting 
 Transient (2 sec.) 
1292/700 
1256/680 
1292/700 
932/500 
1328/720 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
1310/710 
1274/690 
1310/710 
- - 
1346/730 
1292/700 
1256/680 
1292/700 
932/500 
1328/720 
1328/720 
- - 
1328/720 
- - 
1364/740 
MODELS: JT15D-5 JT15D-5A JT15D-5B JT15D-5C JT15D-5F JT15D-5R  
 Takeoff (5 min.) (See NOTE 15) 
 Maximum continuous 
 Maximum for acceleration 
 Starting 
 Transient (2 sec.) 
1292/700 
1256/680 
1292/700 
1022/550 
1328/720 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
1292/700 
- - 
- - 
- - 
- - 
1256/680 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
 
 
OIL INLET TEMPERATURE øF/øC øF/øC øF/øC øF/øC øF/øC øF/øC øF/øC 
MODELS: JT15D-1 JT15D-1A JT15D-1B JT15D-4 JT15D-4B JT15D-4C JT15D-4D 
 Maximum 
 Minimum 
 Transient maximum (90 sec.) 
250/121 
-40/-40 
280/138 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
MODELS: JT15D-5 JT15D-5A JT15D-5B JT15D-5C JT15D-5F JT15D-5R  
 Maximum 
 Minimum 
 Transient maximum (15 min.) 
250/121 
-40/-40 
275/135 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
265/129 
- - 
- - 
275/135 
- - 
- - 
- - 
 
 
MAXIMUM ACCESSORY TEMP. The engine compartment shall be ventilated as necessary to keep the air temperature surrounding 
accessory components from exceeding the limits defined in the applicable Installation Manual. 
 
AIR BLEED, MODELS: JT15D-1 JT15D-1A JT15D-1B JT15D-4 JT15D-4B JT15D-4C JT15D-4D 
A. High compressor bleed. 
     Maximum external bleed air 
     available is: 
10% of high compressor flow 10% of high compressor flow to 22,000 feet, decreasing 
linearly to 7% at 43,000 feet.  No more than 5% may be 
taken from either of the bleed ports 
B.  Bypass bleed.  Maximum 
     external bleed air available is: 
N/A 2% of the bypass flow throughout the flight envelope 
C.  During starting, bleed shall not  
     exceed that taken by a: 
0.3 - inch diameter orifice throat - - 
D.  Bleed air contamination meets: Para 3.18 of MIL-E-5007c - - 
 
AIR BLEED, MODELS: JT15D-5 JT15D-5A JT15D-5B JT15D-5F  JT15D-5R JT15D-5C 
A.  High compressor bleed. 
     Maximum external bleed air 
     available is: 
10% of high compressor flow to 22,000 feet, decreasing linearly to 5% at 
45,000 feet. No more than 5% may be taken from either of the bleed ports. 
- - 
B.  Bypass bleed.  Maximum 
     external bleed air available is: 
N/A       ---  ---      --- 2% of the bypass flow 
throughout the flight 
envelope 
C.  During starting, bleed shall 
     not exceed that taken by a: 
0.3 - inch diameter orifice throat - - 
D.  Bleed air contamination meets: Para 3.18 of MIL-E-5007C - - 
 
FUEL / ALL MODELS 
Fuel Bleed 
Fuel from pump delivery may be extracted to drive jet or turbine pumps in the airplane fuel system.  Refer to 
appropriate Installation Manual. 
Fuel Pressure Refer to appropriate Installation Manual. 
Fuel temperature Maximum fuel pump inlet temperature for starting and operating is 135øF(57øC); minimum inlet temperature is -
65øF(-54øC), subject to a viscosity limit of 12 centistokes.  (for the JT15D-4, 7 centistokes for cold-soaked 
starting.).See Note 14 for JT15D-5R operation at temperatures  above -40øC

TCDS  E25EA  Page 3 of 7   
Fuel type (Also see NOTE 4) JP-1, JP-4, and JP-5 type fuels conforming to PWA Specification No. CPW 204 and later revisions, plus Icing 
Inhibitor - Fuel System - to CGSB Specification 3-GP-526a in the absence of an approved fuel heater. 
Wide cut fuels and Avgas are not permitted for the JT15D-5R (See SB7144). 
  
 
FUEL CONTROL 
ECU = ELECTRICAL CONTROL 
UNIT 
HMU = HYDROMECHANICAL UNIT 
 
FUEL FLOW DIVIDER 
 
FUEL PUMP 
JT15D-1 
 
JT15D-1A 
JT15D-1B 
JT15D-4 
JT15D-4B 
JT15D-4C 
JT15D-4D 
JT15D-5 
 
JT15D-5A 
JT15D-5B 
 
JT15D-5C 
 
JT15D-5F 
 
JT15D-5R 
Aviation Electric DPL-1 & DPL-2 
 
- - 
- - 
Aviation Electric DPL-2 
- - 
- - 
- - 
ECU: Hamilton Standard EEC 118-31 
HMU: Hamilton Standard JFC 118-31 
Bendix Avelex DPL-2 
ECU: Hamilton Standard EEC 118-31 
HMU: Hamilton Standard JFC 118-31 
ECU: Hamilton Standard EEC 118-31 
HMU: Hamilton Standard JFC 118-31 
ECU: Hamilton Standard 780933-3 
HMU: Hamilton Standard 790155-1 
ECU: Hamilton Standard EEC 118-31 
HMU: Hamilton Standard JFC 118-31 
Lucas SCH 1210/13, FD206 
 
- - 
- - 
Lucas FD206 
- - 
- - 
- - 
Goodrich 25950-2 
 
Lucas 26060 or 26280 
Lucas ES480 
 
Lucas ES480 
 
Lucas 25950 
 
Goodrich 25950-2 
Sundstrand 025493/Vickers PF40094-2B 
 
- - 
- - 
Sundstrand 025493/TRW 398600 
- - 
- - 
- - 
TRW 706600 
Argo Tech  710500 
Argo Tech 717100 
TRW 706600 
 
TRW 706600 
 
TRW 710501-02 
 
Argo Tech   845400 
  
OIL            MODELS: JT15D: 
 
-1 -1A -1B -4 -4B -4C -4D -5 -5A -5B -5C -5F -5R 
OIL PRESSURE psig psig psig psig psig psig psig psig psig psig psig psig psig 
Min. at 20000 rpm N2 & above 
Min. below 20000 rpm N2 
Min. for aerobatic maneuvers 
Max. 
Max. transient (90 seconds) 
65 
35 
N/A 
95 
N/A 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
70 
35 
N/A 
95 
N/A 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
25 
- - 
- - 
- - 
- - 
N/A 
- - 
- - 
60 
40 
N/A 
83 
95 
- - 
- - 
N/A 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
- - 
35 
40 
90 
100 
- - 
40 
N/A 
83 
95 
- - 
- - 
- - 
- - 
- - 
OIL TYPE (Also see NOTE 8) Synthetic type conforming with the current PWA 521 (Type II) Specifications (See Department of 
Transport Canada approved Installation Manual). 
OIL TANK CAPACITY 
Total capacity 
   Imperial gallons 
   U.S. gallons 
 
Usable capacity 
   Imperial gallons 
   U.S. gallons 
 
 
1.78 
2.14 
 
 
1.04 
1.25 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
1.73 
2.08 
 
 
1.01 
1.21 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
1.31 
1.58 
 
 
0.59 
0.71 
 
 
1.73 
2.08 
 
 
1.01 
1.21 
 
 
1.69 
2.03 
 
 
1.00 
1.20 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
- - 
- - 
 
 
1.98 
2.39 
 
 
0.42 
0.50 
 
 
1.69 
2.03 
 
 
1.00 
1.20 
 
 
1.81 
2.17 
 
 
- - 
- -

TCDS  E25EA  Page 4 of 7   
 
ACCESSORY DRIVES The following apply to the accessory drives, which are provided by the engine and included in the basic engine 
weight: 
   SPEED RATIO 
TO TURBINE  
MAXIMUM TORQUE 
(in. - lb.) 
MAXIMUM 
OVERHANG 
 DRIVE ROTATION SHAFT CONTINUOUS STATIC (in.-lb.) 
 DRIVEN BY HIGH ROTOR 
 High rotor tachometer 
 Hydraulic pump 
 Starter generator 
 
DRIVEN BY LOW ROTOR 
 Low rotor tachometer 
 
CW 
CW 
CW 
 
 
CCW 
 
.1282:1 
.1282:1 
.3640:1 
 
 
.2642:1 
 
7 
225 
210 
 
 
7 
 
50 
1600 
1600 
 
 
50 
 
10 
125 
180 
 
 
0 
 *CW - Clockwise; CCW - Counterclockwise 
 
Total accessory power extraction is limited to 22.5 hp at 52% N2 and increases linearly to 30 hp at maximum 
permissible N2 at altitudes up to and including 20,000 ft.  Refer to the applicable Installation Manual for 
restrictions over altitudes of 20,000 ft.  Also see NOTE 3. 
  
IGNITION MODELS  JT15D 
 -1 -1A -1B -4 -4B -4C -4D -5 -5R -5A -5C -5B -5F 
Exciter 
  Unison 
  Lucas 
 
Igniter plug 
  Unison 
  AC 
  Champion 
 
9049770-3 
NB01201 
 
 
9044810-4  
YB-15 
FHE 246-4 
 
9060660-2 
--- 
 
 
9044810-4  
--- 
FHE 246-4 
 
9049770-3 
 
 
 
- - 
--- 
- - 
 
9060660-1 
SL20009-02 
 
 
9044810-4 
 
PRINCIPAL DIMENSIONS Refer to Installation Drawing in approved Installation Manual. 
 
C. G. LOCATION  Refer to Installation Drawing in approved Installation Manual. 
 
CERTIFICATION BASIS 
 
JT15D-1, except serial numbers 076364 
through 076672 
 
JT15D-1A, all serial numbers 
JT15D-1B, all serial numbers 
 
 
FAR 21.29, FAR 33 dated February 1, 1965, Amendments 33-1, 33-2, 33-3, 
inclusive. 
  JT15D-4, -4B, -4C, and -4D, except 
  serial numbers 070011 through 070059 
  less 070038 
FAR 21.29, FAR 33 dated February 1, 1965, Amendments 33-1 through 33-4, 
inclusive, and FAR 33.68 of Amendment 33.6. (Excepted serial numbers were 
certified under FAR 21.21  See NOTE 10.) 
Models JT15D-5, -5A, -5B, -5C, -5F and -
5R 
FAR 21.29, FAR 33, Amendments 1 through 9 inclusive, effective October 14, 
1980, with the exception of 33.77, 33.88, and 33.92 which are to FAR Part 33 
Amendments 1 through 4 inclusive, effective April 22, 1971; and Advisory 
Circulars AC 33-1B and 33.3. 
 
NOTE: The JT15D-5A incorporates a dual idle solenoid P/N 3242737.  The use 
of low idle speed is approved for ground operation only.  When operating 
at the low idle speed, the engine is not approved for operation in icing conditions as 
defined by FAR Part 33, paragraph 33.68(b).

TCDS  E25EA  Page 5 of 7   
 
 TYPE CERTIFICATE NUMBER E25EA   TYPE CERTIFICATE NUMBER E25EA 
 
MODEL 
APPLIED 
FOR 
ISSUED/ 
REVISED 
 
DELETED 
  
MODEL 
APPLIED 
FOR 
ISSUED/ 
REVISED 
 
DELETED 
JT15D-1 
JT15D-4 
JT15D-1A 
JT15D-1B 
JT15D-4B 
JT15D-4D 
JT15D-5 
JT15D-5A 
JT15D-5B 
JT15D-4C 
JT15D-5C 
JT15D-5F 
06/02/69 
11/23/73 
09/07/76 
07/16/82 
12/15/83 
12/15/83 
04/24/84 
03/08/88 
11/06/90 
01/28/91 
02/05/92 
03/01/93 
05/13/71 
01/28/74 
10/05/76 
09/17/82 
12/22/83 
12/22/83 
06/13/84 
12/01/88 
11/15/90 
08/21/92 
08/21/92 
10/05/93 
  JT15D-5R 02/09/06 09/07/06  
 
IMPORT REQUIREMENTS: To be considered eligible for installation on United States (U.S.) registered aircraft, each engine to 
be exported to the U.S. shall be accompanied by a certificate of airworthiness for export or by a 
certifying statement, endorsed by the exporting cognizant civil airworthiness authority and 
containing the following language: 
 
(1) This engine conforms to its Type Certificate Number E25EA and is in a condition for  
safe operation. 
 
(2) This engine has been subjected by the manufacturer to a final operational check and is in 
 a proper state of airworthiness. 
 
Reference FAR Section 21.500, which provides for the airworthiness acceptance of aircraft engines 
manufactured outside of the U.S. and for which a U.S. type certificate has been issued.  Additional 
guidance is contained in FAA Advisory Circular 21-23, "Airworthiness Certification of Civil 
Aircraft, Engines, Propellers, and Related Products Imported into the United States." 
  
 
          
NOTES 
  
NOTE 1. The engine ratings are based on static sea level conditions: 
 
Compressor inlet air (dry) 59øF (JT15D-4D is rated at 69øF, JT15D-5/-5A/-5B/-5F and -5R are 
rated at 80øF, at takeoff and 59øF at max. continuous). 
 
  29.92 in. Hg. 
 
No accessory loads or air bleed. 
 
  Engine intake and exhaust as described in the Department of Transport, Canada,  
  approved Installation Manual. 
 
NOTE 2. Emergency operation on gasoline (MIL-G-5572, all grades) is limited to a total of 50 hours in any 
engine overhaul period. 
 
NOTE 3. The starter/generator pad may be overloaded in an emergency to a torque of 340 in.-lb. for periods 
up to 5 minutes, subject to total accessory power not exceeding 40 hp up to an altitude of 9,000 ft for 
all engine models except the -5, -5B, -5F and –5R which extend to 10,000 ft.  Above 9,000 ft 
allowable emergency horsepower extraction decreases linearly to 30 hp at an altitude of 20,000 ft 
and then reverts to normal horsepower extraction limits for all engine models except the -5, -5B, -5F 
and -5R.  For these engine models the emergency horsepower extraction decreases linearly from 40 
hp at 10,000 ft to 29 hp at an altitude of 45,000 ft.  
 
NOTE 4. For alternate fuels, see Department of Transport, Canada, approved Installation Manual. 
 
NOTE 5. This NOTE deleted June 13, 1977.

TCDS  E25EA  Page 6 of 7   
 
NOTE 6.  These engines meet FAA requirements for adequate turbine disk integrity and rotor blade 
containment and do not require external armoring. 
 
NOTE 7.    Certain engine parts are life limited.  For JT15D-1, -1A, -1B, JT15D-4, -4B, -4D and JT15D-5, -5A, 
-5F, -5R engines, these life limits are listed in P&WC Engine Service Bulletin Number 7002. 
 
For JT15D-4C and JT15D-5C life limits are listed in PW&C Engine Service Bulletin Number 7302. 
 
For JT15D-5B life limits are listed in P&WC Engine Service Bulletin Number 7402. 
 
Permissible overhaul and inspection intervals are listed in P&WC Engine Service Bulletin Number 
7003 (Number 7403 for JT15D-5B engines). 
 
NOTE 8. P&WC Engine Service Bulletin Number 7001 lists approved oil brands (7401 for JT15D-5B and -
5F). 
 
NOTE 9. The JT15D models incorporate the following characteristics: 
 
JT15D-1  Basic model. 
 
JT15D-1A Similar to JT15D-1 except for increased low rotor speed limit and  
                                  improved altitude performance.  
 
JT15D-1B Identical to JT15D-1A with higher recommended cruise rating and 
                                 decreased Time Before Overhaul (TBO). 
 
JT15D-4  Similar to JT15D-1 except for additional single stage axial  
  compressor and increased ratings. 
 
JT15D-4B Similar to JT15D-4 except for increased rotor speed and gas path  
  temperature limitations. 
 
JT15D-4C Similar to JT15D-4 except approved for aerobatic maneuvers. 
 
JT15D-4D Similar to JT15D-4 except for increased rotor speed and gas path  
  temperature limitations. 
 
JT15D-5  Similar to JT15D-4 except for increased thrust ratings and electronic  
  fuel control. 
 
JT15D-5A Similar to JT15D-5 except for hydromechanical fuel control unit and the  
                                 ignition system (2 separate exciters replaces the single input/dual output  
                                 JT15D-5 unit) and the dual idle solenoid. 
 
JT15D-5B Similar to JT15D-5 except that life limited rotating components have new part 
  numbers to satisfy the requirements of the specific aircraft application. 
 
JT15D-5C Similar to JT15D-5 except thrust ratings are increased and approved for  
  aerobatic maneuvers. 
 
JT15D-5F  Similar to JT15D-5 except for installation specific modifications. 
 
JT15D-5R                 Similar to the JT15D-5 except for the addition of a fuel heater and filter with  
                                  appropriate externals and accessory changes.  The fuel filter is transferred to  
                                  the engine (previously A/C mounted) downstream of the fuel heater.

TCDS  E25EA  Page 7 of 7   
 
NOTE 10. This Type Certificate Data Sheet reflects the certification basis and approval for those serial-
numbered JT15D series engines listed under "Certification Basis." 
 
Two Type Certificates have been issued for administrative purposes:  E25EA under FAR 21.29, for 
engines produced in Canada, and E1NE under FAR 21.21, for engines produced in the United States.  
The type design for each model engine, regardless of where produced, is identical.  The information 
on this Type Certificate Data Sheet applies to all Pratt & Whitney Canada Model JT15D series 
engines, including: 
 
(a)  Those serial-numbered engines listed on and certificated under FAA Type Certificate E1NE, 
originally issued to Pratt & Whitney Aircraft Division of United Technologies Corporation, East 
Hartford, Connecticut, U.S.A., and reissued to Pratt & Whitney Canada Ltd., (formerly United 
Aircraft of Canada, Ltd.) Longueuil, Quebec, Canada. 
 
(b)  Those serial numbered engines listed above, certificated under this Type Certificate E25EA, 
issued to Pratt & Whitney Aircraft of Canada, Ltd.. (formerly United Aircraft of Canada Ltd.), 
Longueuil, Quebec, Canada. 
 
NOTE 11. 
 
This NOTE deleted.  
NOTE 12. 
 
 
 
 
NOTE 13 
 
 
 
NOTE 14 
 
 
NOTE 15 
Service bulletins, structural repair manuals, vendor manuals, aircraft flight manuals, and overhaul 
and maintenance manuals, which contain a statement that the document is Transport Canada-
approved, are accepted by the FAA and are considered FAA-approved unless otherwise noted.  
These approvals pertain to the type design only. 
 
Certain JT15D engines carry an additional designation in the form of a build specification number 
shown on the Supplementary data plate.  Designation and users are listed in P&WC Service Bulletin 
No. 7151 
 
JT15D-5R may be used at temperatures  above -40°C (-40°F) without the use of fuel system icing 
inhibitor. 
 
The take-off ratings that are nominally limited to 5 minutes duration may be used for up to 10 
minutes for OEI operations without adverse effects upon engine airworthiness.  Such operations are 
anticipated on an infrequent basis (as engine failure events during take-off are uncommon) and no 
limits or special inspections have been imposed. 
 
----END----
```

## ADs (9, in force first)

- [AD 2023-03-12](https://openairdocs.org/ad/2023-03-12): Turbine Engine Compressor Section · Pratt & Whitney Canada JT15D-1, JT15D-1A and JT15D-1B. Effective Mar 31, 2023
- [AD 2008-24-10](https://openairdocs.org/ad/2008-24-10): Fuel Control Hydro Mechanical Unit (HMU) P3 servo · Pratt & Whitney Canada JT15D-5, JT15D-5B, JT15D-5F and 1 more. Effective Jan 2, 2009
- [AD 93-18-08](https://openairdocs.org/ad/93-18-08): High Pressure Turbine (HPT) Assembly · Pratt & Whitney Canada JT15D-1, JT15D-1A, JT15D-1B and 4 more. Effective Nov 24, 1993
- [AD 93-19-03](https://openairdocs.org/ad/93-19-03): Flow Divider Start Salve Diaphragm · Pratt & Whitney Canada JT15D-5A. Effective Oct 12, 1993
- [AD 91-15-02](https://openairdocs.org/ad/91-15-02): Gas Generator Case · Pratt & Whitney Canada JT15D-4B. Effective Aug 22, 1991
- [AD 91-01-03](https://openairdocs.org/ad/91-01-03): Hydromechanical Fuel Control Units · Pratt & Whitney Canada JT15D-5, PW118, PW118A and 3 more. Effective Jan 7, 1991
- [AD 87-10-01](https://openairdocs.org/ad/87-10-01): Fan Blades · Pratt & Whitney Canada JT15D-1, JT15D-1A, JT15D-1B and 3 more. Effective Jul 15, 1988
- [AD 2004-04-09](https://openairdocs.org/ad/2004-04-09) (historical): Impellers · Pratt & Whitney Canada JT15D-1, JT15D-1A and JT15D-1B. Effective Apr 5, 2004
- [AD 92-22-15](https://openairdocs.org/ad/92-22-15) (historical): Pratt & Whitney Canada JT15D-5A. Effective Oct 21, 1992

## Registered aircraft by registry model (OpenAirDocs)

- [Pratt & Whitney Canada JT15D-1A](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-1a): 73 aircraft (registry code 52110)
- [Pratt & Whitney Canada JT15D-5](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-5): 42 aircraft (registry code 52197)
- [Pratt & Whitney Canada JT15D-5R](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-5r): 42 aircraft (registry code 52285)
- [Pratt & Whitney Canada JT15D-5A](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-5a): 30 aircraft (registry code 52080)
- [Pratt & Whitney Canada JT15D-4B](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-4b): 10 aircraft (registry code 52194)
- [Pratt & Whitney Canada JT15D-4C](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-4c): 9 aircraft (registry code 52195)
- [Pratt & Whitney Canada JT15D-1B](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-1b): 1 aircraft (registry code 52193)
- [Pratt & Whitney JT15D-5](https://openairdocs.org/engine/pratt-whitney-jt15d-5): 1 aircraft (registry code 52379)
- [Pratt & Whitney Canada JT15D-4D](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-4d): 0 aircraft (registry code 52196)
- [Pratt & Whitney Canada JT15D-5B](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-5b): 0 aircraft (registry code 52198)
- [Pratt & Whitney Canada JT15D-5C](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-5c): 0 aircraft (registry code 52201)
- [Pratt & Whitney Canada JT15D-5F](https://openairdocs.org/engine/pratt-whitney-canada-jt15d-5f): 0 aircraft (registry code 52202)

## STCs approved under this data sheet (4)

- [STC SE2082NM](https://openairdocs.org/stc/SE2082NM): Manufacture of alternate oil gauge (dipstick) P/N 82-2100-1. Jennings W P & Assoc
- [STC SE01232AT](https://openairdocs.org/stc/SE01232AT): Installation of Unison Ignition Lead, P/N 10-395428-3, 38.5-inch Type 3 Ignition Lead.. Unison Industries
- [STC SE361CH](https://openairdocs.org/stc/SE361CH): Installation of Meyer Tool listing of P&W Canada service bulletins pages 1 thru 9 and Meyer Tool drawing for engine rating identification plate. (JT15D-4 PCE70098, PCE70080). Meyer Tool, Inc.
- [STC SE7603SW](https://openairdocs.org/stc/SE7603SW): Modification of front inner bypass duct assembly, P/N 3029681.. Aviall of Texas, Inc

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
