# TCDS E44NE: CFE Company

- Type: Type certificate data sheet
- Status: Current
- Holder: CFE Company
- Revision: 5
- Revised: February 1, 2008
- Product: Engine
- Certification basis: Part 25, Part 33, Part 34
- Registered aircraft: 142, by the registry models matched to it (OpenAirDocs)
- Data sheet PDF: https://openairdocs.org/files/sha256/d7/aa/d7aa7c351c2f2ec623febc19afe97a6f1e0e18a4eee3df2c87fbe77efc2040b5
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/B8A7E27BE41BB6A4862573E70069F0F2.0001
- Page: https://openairdocs.org/tcds/E44NE

## Models (1)

As the data sheet lists them.

- CFE738-1-1B

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
* 
 PAGE   1  2  3  4 
 REV.  5  5   5 
 LEGEND: "- -" INDICATES "SAME AS PRECEDING MODEL" 
                 "---" NOT APPLICABLE 
NOTE:  SIGNIFICANT CHANGES IF ANY, ARE BLACK-LINED IN 
             THE LEFT HAND MARGIN 
 
 
 
U.S. DEPARTMENT OF TRANSPORTATION 
 
FEDERAL AVIATION ADMINISTRATION 
 
TYPE CERTIFICATE DATA SHEET  E44NE 
 
 
TCDS NUMBER   E44NE 
 
REVISION:  5* 
DATE:  February  1, 2008 
CFE COMPANY 
 
MODELS: 
 
CFE738-1-1B 
 
Engines of models described herein conforming with this data sheet (which is a part of Type Certificate Number E44NE) and other 
approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in 
accordance with pertinent aircraft data sheets and applicable portions of the Federal Aviation Regulations, provided they are installed, 
operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. 
 
TYPE CERTIFICATE (TC) HOLDER: CFE COMPANY 
    111 South 34th Street 
    Phoenix, AZ  85034 
 
1. MODELS CFE738-1-1B 
TYPE Turbofan, Single Stage Fa n, Five Stage Axial Compressor, Single Stage Centrifugal 
Compressor, Annular Combustion Chamber, Two Stage High Pressure Turbine, Three Stage 
Low Pressure Turbine 
RATINGS (See NOTE 5) 
  Sea Level Static Thrust, lb 
 
   Maximum Takeoff (5 min.)    
     (See NOTES 12, 16  & 17) 
   Normal Takeoff (5 min.) 
     (See NOTES 12, 16 & 17) 
   Maximum Continuous (See NOTE 12) 
 
   Rating ambient temperature 
 
    Maximum Takeoff 
    Normal Takeoff 
    Maximum Continuous 
 
FUEL CONTROL 
 
 
 
 
FUEL  
 
 
 
 
 
 
OIL 
 
 
 
 
 
 
5937 
 
5918 
5613 
 
 
 
100oF (37oC) 
86oF (30oC) 
86oF (30oC) 
 
Fuel control and power management are controlled by a Full Authority Digital Electronic 
Control (FADEC) computer based system.  The hardware and software configurations of this 
system and the associated engine fuel pump and hydromechanical unit are controlled by an 
approved engine equipment list for each specific engine model and aircraft application.  
 
Fuel conforming to General Electric Fuel Specification No. D50TF2, or current revision.  See 
CFE738 Engine Installation Manual IM-7550 for specific fuels approved per the subject 
specifications.  No. 3 Jet Fuel per GB6537-94 and No. 3A Jet Fuel per GB6537-05 is 
approved and conforms to the latest revision of General Electric Company jet fuel 
specification No. D50TF2 
 
Oil conforming to General Electric Specification No. D50TF1, or Honeywell International, 
Inc oil specification EMS53110, current revision.  See CFE738 Engine Installation Manual 
IM-7550 for specific oils approved per the subject specifications.

E44NE  -2  -  
I. MODELS (cont.) CFE738-1-1B 
PRINCIPAL DIMENSIONS The Principal Dimensions are lis ted on the approved Installation Drawing for each engine 
model. 
WEIGHT (dry maximum), pounds 1325 pounds (See NOTE 14) 
CENTER OF GRAVITY LOCATION, (in) The Cent er of Gravity is listed on the approved Installation Drawing for each engine model. 
IGNITION SYSTEM The ignition system  is a dual-channel, continuous duty, capacitive discharge unit with 
independent circuits to each ignitor plug.  The authorized ignition system components are 
controlled by the approved engine equipment list. 
  
CERTIFICATION BASIS 
    (See NOTE 13) 
FAR 33, effective February 1, 1965, as amended by 33-1 through 33-14, dated August 10, 1990. 
 
     Type Certificate 
Model  Date of Application   No.  E44NE Issued  
 
CFE738-1-1B March 16, 1990  December 17, 1993 
 
PRODUCTION BASIS Production Cer tificate No.108 issued  January 13, 1961, and No. 413 issued March 4, 1965, under 
license from CFE Company, Phoenix, AZ. 
 
 
        
NOTES 
 
NOTE 1. Maximum permissible engine operating sp eeds for the engine rotors are as follows: 
 
    CFE738-1-1B  
 
Low pressure rotor (N1), rpm  
 
Maximum Takeoff/Normal Takeoff 9,400 
Maximum continuous  9,400 
 
High pressure rotor (N2), rpm  
 
Maximum Takeoff/Normal Takeoff 28,000 
Maximum continuous  27,715 
 
NOTE 2. Maximum permissible temperatures are as follows: 
Interturbine temperature (T4.5), oF(oC) 
 
Maximum Takeoff (5 min.)  1634 oF (890oC) 
Normal Takeoff (5 min.)  1587 oF (864oC) 
Maximum Continuous  1582 oF (861oC) 
 
 Oil inlet temperature, oF(oC) 
 
Continuous operation:  280 oF (138oC) 
Transient operation (3 min.):   280 oF (138oC) - 311oF (155oC) 
 
 Fuel inlet temperature  
(at engine fuel pump inlet), oF(oC): 135 oF (57oC)

E44NE  -3  - 
NOTE 3. Fuel and Oil Pressure Limits 
 
Fuel Pump Inlet Pressure: 
 
  Minimum:   5 PSI above true vapor pressure 
  Maximum:   50 PSIG 
 
Oil Pressure: 
 
  Minimum (idle):   30 PSIG 
  Normal Operating Range:  60-85 PSIG 
  Transient (3 min):   85-100 PSIG 
 
 
NOTE 4.  ACCESSORY DRIVE PROVISIONS 
                
 
 
Accessory 
Drive 
 
 
Pad 
Type 
 
 
Speed 
Ratio (3) 
 
 
Rotation  
Facing  
Pad 
 
Maximum Torque (in-lb) 
 
Static Continuous  Overload  
        (2) 
 
 
Maximum 
Accessory 
Weight (lbs) 
 
 
Overhung 
Moment 
Max (lb-in) 
Alternator (D1) AS468B-
AV1 Mod (1) 
 
0.4418 
 
CCW 
 
1700 218  327  
 
40 
 
200 
Alternator (D2) AS468B-
AV1 Mod (1) 
 
0.3666 
 
CCW 
 
1700 263  394  
 
40 
 
200 
Starter (D3) AS468B-
AV1 Mod (1) 
 
0.5868 
 
CCW 
 
3900 1764( 5)  2712( 5) 
 
25 
 
150 
Hydraulic 
Pump (D4) 
AS961B-1 
Mod (1) 
 
0.3082 
 
CCW 
 
600 210  315 
 
10 
 
30 
Optional 
Hyd Pump (D5) 
AS961B-1 
Mod(1) 
 
0.3666 
 
CCW 
 
1700 263  394 
 
40 
 
200 
NOTES: 
(1) Refer to the application pad definition on th e Installation Drawing for detailed information. 
(2) 5 minutes per each 4 hour period. 
(3) The accessory gearbox is driven from the High Pressure spool. 
(4) The engine Installation Manual lists the maximum combined simultaneous horsepower extraction for the alternator and 
hydraulic  
 pump drives. 
(5) Limited to starts. 
 
NOTE 5. Engine ratings are based on calibrated test stand performance under the following conditions: 
 
Static sea level standard conditions of 59øF and 29.92 inches Hg. 
No aircraft accessory loads or air extraction. 
No anti-icing; no inlet distortion; no inlet screen losses; and 100% ram recovery. 
Inlet and exhaust system as defined in the engine Installation Manual IM-7550. 
Specified fuel having an average lower heating value of 18,400 BTU/lb; specified lube oil.

E44NE  -4  - 
NOTE 6. Maximum Compressor Bleed Air Extraction: 
    P e r c e n t  o f   
    Core Airflow  
Low Pressure Bleed   8.0 
High Pressure Bleed   5.5 
Total LP and HP Bleed  12.0 
 
NOTE 7. These engine models meet FAA requirements for operation in icing conditions within the envelope 
defined in FAR 25, Appendix C when installed and operated in accordance with approved data and 
instructions. 
 
NOTE 8. The maximum permissible inlet distortion is defined in the Engine Installation Manual IM-7550. 
 
NOTE 9. Life limits, established for critical rotating co mponents, are published in the approved engine Light 
Maintenance Manual, Report Number 72-06-03, Airworthiness Limitations Section. 
 
NOTE 10. Recommended engine inspection intervals are published in the approved engine Light Maintenance 
Manual, Report Number 72-06-03. 
 
NOTE 11. The operating temperature limits for specified components and accessories defined in the Engine 
Installation Manual IM-7550 must be observed when operating the installed engine. 
 
NOTE 12. Sea level static minimum rated thrust varies lin early between ambient temperature points shown below, 
but is flat rated below 59oF (15oC). 
   SLS/59 oF(15oC) SLS/86 oF(30oC) SLS/100 oF(37oC)  
Maximum Takeoff          5888         5918           5937 
Normal Takeoff          5888         5918           5454 
Maximum Continuous         5613         5613           N/A 
 
NOTE 13. The engine model meets the requirements of FAR Part 34, original effective September 10, 1990. 
 
NOTE 14. The engine weight includes all components of the basic engine as defined by the approved engine 
equipment list.  Components that are certified as part of the aircraft under FAR Part 25 and other 
optional equipment which are mounted on the engine are not included in the basic engine weight. 
 
NOTE 15. Engine Installation Manual IM-7550 and Oper ating Instructions IM-8007 contain additional FAA 
approved engine data. 
 
NOTE 16. The CFE738-1-1B engine normal takeoff intertur bine temperature (T4.5) limit has been established to 
assure that a fully degraded engine at the normal takeoff rating will achieve the maximum takeoff (APR) 
rated thrust without exceeding the maximum takeoff T4.5 limit. 
 
NOTE 17. The time limit at the normal takeoff rating is five  minutes and shall include any time accumulated above 
the normal takeoff rating. 
 
NOTE 18. The CFE738-1 engine model was removed from T ype Certificate E44NE at the request of the type 
certificate holder.  No CFE738-1 engine models are in existence. 
 
NOTE 19. Criteria pertaining to the dispatch and maintenan ce requirements for engine control systems are specified 
in CFE Report No. CFE1229(33)-4, which defines the various configurations and maximum operating 
intervals. 
 
 
---END---
```

## ADs (8, in force first)

- [AD 2024-12-03](https://openairdocs.org/ad/2024-12-03): Turbine Section · CFE CFE738-1-1B. Effective Aug 13, 2024
- [AD 2017-08-08](https://openairdocs.org/ad/2017-08-08): Turbine Engine Compressor Section · CFE CFE738-1-1B. Effective May 31, 2017
- [AD 99-27-16 R1](https://openairdocs.org/ad/99-27-16-R1): Aft cooling plates · CFE CFE738-1-1B. Effective Aug 2, 2002
- [AD 2002-09-10](https://openairdocs.org/ad/2002-09-10): High Pressure Turbine (HPT) Stage 1 Aft Cooling Plate and HPT Stage 2 Disk · CFE CFE738-1-1B. Effective Jun 12, 2002
- [AD 2001-26-06](https://openairdocs.org/ad/2001-26-06): Fan Rotor Disks · CFE CFE738-1-1B. Effective Jan 7, 2002
- [AD 2000-23-12](https://openairdocs.org/ad/2000-23-12): Rotors · CFE CFE738-1-1B. Effective Jan 16, 2001
- [AD 2000-21-10](https://openairdocs.org/ad/2000-21-10): Support Assemblies · CFE CFE738-1-1B. Effective Nov 8, 2000
- [AD 99-27-16](https://openairdocs.org/ad/99-27-16) (historical): High Pressure Turbine Aft Cooling Plates · CFE CFE738-1-1B. Effective Feb 10, 2000

## Registered aircraft by registry model (OpenAirDocs)

- [C F E CFE-738-1-1B](https://openairdocs.org/engine/c-f-e-cfe-738-1-1b): 73 aircraft (registry code 16800)
- [Alliedsign CFE-738 series](https://openairdocs.org/engine/alliedsign-cfe-738-series): 42 aircraft (registry code 02500)
- [Honeywell CFE-738-1-1B](https://openairdocs.org/engine/honeywell-cfe-738-1-1b): 27 aircraft (registry code 33906)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
