# TCDS E7EA: General Electric Company - Type: Type certificate data sheet - Status: Current - Holder: General Electric Company - Revision: 13 - Revised: August 21, 2008 - Product: Engine - Certification basis: CAR 13 - Registered aircraft: 27, by the registry models matched to it (OpenAirDocs) - Data sheet PDF: https://openairdocs.org/files/sha256/98/ee/98ee1561bdfb42248780ead3c3b17b4e332f88e159c5c9bb960c50654573ae8d - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/94C937CF399AAC0D862576E9005F9196.0001 - Page: https://openairdocs.org/tcds/E7EA ## Models (3) As the data sheet lists them. - CF700-2D - CF700-2D-2 - CF700-2C ## What the data sheet says From the PDF's text layer, line by line; tables lose their columns. The PDF is the record. ```text LEGEND: "- -" INDICATES "SAME AS PRECEDING MODEL" "---" INDICATES "NOT APPLICABLE" PAGE 1 2 3 4 REV. 13 12 12 12 DEPARTMENT OF TRANSPORTATION TCDS Number: E7EA FEDERAL AVIATION ADMINISTRATION Revision 1 3 Date: August 21, 2008 TYPE CERTIFICATE DATA SHEET NO. E7EA GENERAL ELECTRIC CF700-2C CF700-2D CF700-2D-2 Engines of models described herein conforming with this data sheet (which is a part of Type Certificate No. E7EA) and other approved data on file with the Federal Aviation Administration meet the minimum standards for use in certificated aircraft in accordance with pertinent aircraft data sheets and applicable portions of the Civil Air Regulations/Federal Aviation Regulations, provided they are installed, operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. Type Certificate (TC) Holder: General Electric Company GE – Aviation 1000 Western Ave Lynn, Massachusetts 01910 Model CF700-2C CF700-2D CF700-2D-2 Type Turbofan: 8 stage axial flow compressor, 2 stage turbine, annular type combustion chamber, with free-floating single stage fan aft of turbine. - - - - Ratings (See NOTE 5) Maximum continuous at sea level, static thrust, lb. 4000 4120 - - Takeoff (5 Min.) at sea level, static thrust, lb. 4200 4325 4500 Fuel Control General Electric MFC-2 - - - - Fuel Pump Chandler-Evans model 9234 with integral boost. - - - - Fuel (See NOTES 7, 8, and 11) Kero sene, JP-4 and JP-5 type fuels conforming to G.E. Jet Fuel Spec. D50TF2, current revision - - - - Oil (See NOTE 11) Oil conforming to General Electric Specification D50TF1, current revision - - - - Principal Dimensions Length, inches (flange to flange) 53.56 - - - - Max. diameter, inches (max. flange) Gas generator 17.56 - - - - Fan 33.10 - - - - Center of Gravity (dry weight) with standard equipment Aft of front frame flange fwd. face, in. 28.28 27.64 29.10 To right of engine vertical centerline, in. 0.3 - - - - Below engine horizontal centerline, in. 1.1 - - - - Weight (dry), lb. (includes as standard equipment basic engine accessories and speed control, oil tank, fuel-oil cooler, fan blucket guard, ignition system less power source, inlet anti-icing system and exhaust thermocouples, exhaust nozzle on 2D-2, Compressor Spool Rotor on CF700-2D and CF700- 2D-2 (SB 72-160)). 765 799 829 Usable oil tank capacity (quarts) 3 - - - - Ignition (24-30 volts D.C.) Capacito r discharge exciters P/N 37D401588, 4006T58, 4016T54, 4920T03 or 4026T03 and ignitor plugs P/N 37B201652, 37C311124 or 4013T35. - - - - NOTES 1 through 15 & 17 - - 1 through 17 Page 2 of 4TCDS E7EA Certification basis: Regulations & Amendments Model Date of Application Date Type Certificate No. E7EA Issued/Revised CAR 13 effective June 15, 1956 as amended by 13-1, 13-2, 13-3, 13-4 and 13-5. CF700-2B September 18, 1963 July 1, 1964 CF700-2C May 10, 1965 July 16, 1965 CF700-2D May 11, 1967 January 31, 1968 CF700-2B — Canceled February 8, 1968 CF700-2D-2 August 19, 1969 October 24, 1969 Production basis Production Certificate No. 108 NOTE 1. Maximum permissible e ngine rotor speeds are: CF700-2C CF700-2D CF 700-2D-2 Takeoff 16,700 r.p.m. - - - - Maximum continuous 16,500 r.p.m. - - - - Maximum permissible fan rotor speed is: 9,000 r.p.m. - - - - NOTE 2. Maximum permissible temperatures: (T 5) Takeoff (5 min.) 1345°F** - -* 1365°F Maximum Continuous 1300°F** 1315°F* 1335°F Maximum Transient (10 sec.) 1440°F - - - - Maximum Transient for starting (5 sec.) 1570°F - - - - Maximum Transient for starting (2 sec.) 1670°F - - - - Oil Reservoir 365°F (steady state) - - - - 380°F transient (3 min.) - - - - No. 2 & 3 bearing scavenge oil 380°F - - - - *CF700-2D engines which have been reworked per CF700 Service Bulletin 77-4 to incorporate alternate immersion thermocouple harness 6012T16P03 may use the CF700-2D-2 limits of 1365°F for takeoff and 1335°F for maximum continuous. **CF700-2C engines which have been reworked per CF 700 Service Bulletin #77-7 to incorporate the alternate immersion harness P/N 6012T16P03 may use increased T5 limits of 1355°F for T.O. and 1335° for M.C. Refer to Operating Instructions SEI-189 for time-temperature envelope. The exhaust gas temperature is measur ed by 8 thermocouples mounted in a radial plane in the fan front frame. NOTE 3. Fuel and oil pressure limits: Fuel: Minimum at engine pump inlet 5 p.s.i. above true fuel vapor pressure; or a pressure equal to the supply tank pressure whichever is greater with maximum of 50 p.s.i.g. Oil pressure at oil filter inlet or oil cooler discharge: Minimum 5 p.s.i.g. Maximum 65 p.s.i.g. Refer to Operating Instructions SEI-189 for operating range limits. NOTE 4. Accessory Drive Provisions Accessory Speed Torque Rating (lb. in.) Max. Pad Drive Pad AND Type RPM Continuous Static HP Rotation*** P2 Starter 20002 X11-D 7088 (**) 2600 56 P2-CC or Starter - P3-C P3 Generator P2 Generator 20002 X11-D 7088 500 2200 56 P2-CC or Alternator P3-C P3 P4 Hydraulic 20001 XI-B 7811 250 1650 31 C Pump P1* Tachometer 20005 XV-B 4190 7 50 0.50 CC Page 3 of 4TCDS E7EA NOTES Total customer power extraction in any combination from Pads P2, P3, and P4 shall not exceed 65 h.p. * Tachometer mounted on lube pump. ** Starter torque limitations at initial engagement of star ter 1750 lb. in. maximum for 0.5 seconds. Follow-on start cycle 1056 lb. in. for a maximum of 15 seconds, otherwise generator continuous limits apply. *** "C" - Clockwise, "CC" - Count er-clockwise facing engine pad. The customer power extraction limits vs engine speed are presented in the G.E. CF700 Installation Manual No. SEI-124A. Location and details of the accessory drive pads are presented on the Installation Drawing, Sheet I. NOTE 5. Engine ratings are based on calibrate d stand performance under the following conditions: Operation at rated engine speeds. Static sea level standard conditions of 59°F and 29.92 in. Hg. General Electric bellmouth and bullet nose on air inlet. No external air bleed or accessory drive power for aircraft accessories. Exhaust configuration as defined by G.E. drawing 5005T30 (CF700-2C) and 6006T89 (CF700-2D) and 5017T20 (CF700-2D-2). No anti-icing airflow. Turbine exhaust gas temperature limits not exceeded. At sea level static conditions below 59°F rated thrust will increase to maximum physical thrust limits as indicated. CF700-2C CF700-2D CF700-2D-2 Takeoff 4360 lb. @ 45°F 4453 lb. @ 48°F (Does not apply) Maximum Continuous 4250 lb. @ 42°F 4418 lb. @ 40°F 4418 lb. @ 40°F These limits may be authorized for use at any am bient temperature for engines whose individual characteristics permit higher than rated thrust to be developed without exceeding approved temperature or RPM limits. The CF700-2C, -2D and -2D-2 models develop 4125, 4250, and 4315 lb. thrust, respectively, at 86°F sea level static conditions. Refer to G.E. Performance Bulletin No. SEI-206 (CF700-2C), SEI-237 (CF700-2D) and SEI-284 (CF700-2D-2) for detailed performance data. NOTE 6. Maximum permissible bleed air ex traction for aircraft purposes is 6% of compressor inlet airflow; refer to the currently approved G.E. CF700 Installation Manual SEI-124A for additional data. NOTE 7. Commercial kerosene, JP-4 and JP-5 type fuels are accepta ble, but whenever a change is made or a mixture is used, a re-adjustment of the fuel control specific gravity setting must be made for optimum acceleration performance. The use of aviation gasoline as an emergency fuel is permitted provided that its use is limited to no more than 25 hours during any one overhaul period. Refer to G.E. Maintenance Manual SEI-187 for specific gravity adjustment. NOTE 8. Optional additive which may be used in approved fuels are: 1) Philips PFA-55MB or anti-icing additives to speci fication MIL-I-27686E at a concentration not in excess of 0.15% by volume. 2) Shell ASA-3 anti-static additive at a concentra tion that will provide not in excess of 300 conductivity units which is approximately equivalent to one (1) PPM. 3) SOHIO Biobor JF biocide additive at a concentra tion not in excess of 20 PPM elemental boron (270 PPM total additive). The above additives may be used in combination. NOTE 9. These engines meet FAA requirement s for operation in icing conditions, for adequate turbine and fan disc integrity and rotor blade containment and do not require airframe mounted armoring. Refer to G.E. Operating Instructions SEI-189 for operating procedure under icing conditions. Page 4 of 4TCDS E7EA NOTE 10. The maximum permissible rotor overspeeds are as follows: Gas Generator (r.p.m.) Steady State 17,160 for 2 minutes Transient 17,820 F a n Steady State 9,300 for 2 minutes Transient 9,700 When any of these limits are exceeded, the engine mu st be inspected as defined in the G.E. Maintenance Manual SEI-187. NOTE 11. Refer to G.E. Operating Instruc tions SEI-189 (Operations Engineering Bulletin Nos. 1 & 2) for list of approved fuels and oils. NOTE 12. An altitude idle speed reset unit (AIR) P/N 6002T64 is av ailable and may be incorporated in the fuel control to automatically establish a special flight idle speed schedule within the limits of the minimum flight idle speeds defined in SEI-124A -CF700 Installation Manual. For engines not equipped with AIR, either the aircraft system must be capable of maintaining the minimum idle schedule or the pilot must monitor and manually reset idle speed to maintain the minimum speed schedule as defined in SEI-124A, unless a modified schedule is coordinated with and approved by the General Electric Company. Engine equipped with the AIR unit are identified by the letter "A" following the engine serial number. NOTE 13. The CF700-2D model engine is the same as the CF700-2C model except for increased ratings and an improved turbine. The CF700-2D-2 model engine is the same as the CF700-2D model, except for increased ratings and larger tailpipe area. NOTE 14. Engine models CF700-2D & -2D-2 may be modified in accordance with G.E. Service Bulletin No. 72-64 to conform to the CF700-2C ratings and limitations by incorporating G.E. Kits P/N 5910T15G01. CF700-2D or -2D-2 engines so modified have the suffi x letter "K" added to the engine serial number. NOTE 15. Certain engine parts are life lim ited. These limits are listed in the FAA approved G.E. CF700 Turbofan Overhaul Manual SEI-133, Section 72-00 Inspection. NOTE 16. Only CF700-2D-2 engine models incorporating the letter "B" designation following the engine serial number are eligible for use in NA-265-80 Sabreliner 75A aircraft. NOTE 17. Fuel venting emission control is not included on thes e engines; and therefore, beginning January 1, 1975, airframe compliance must be provided. .....END..... ``` ## ADs (12, in force first) - [AD 2010-09-08](https://openairdocs.org/ad/2010-09-08): AFT Technologies combustion liners · General Electric CF700-2C, CF700-2D, CF700-2D-2 and 7 more. Effective May 28, 2010 - [AD 2001-10-12](https://openairdocs.org/ad/2001-10-12): Unapproved Parts · General Electric CF700-2C, CF700-2D, CF700-2D-2 and 7 more. Effective Jun 7, 2001 - [AD 98-23-06](https://openairdocs.org/ad/98-23-06): Combustion Liner Assemblies · General Electric CF700-2C, CF700-2D, CF700-2D-2 and 7 more. Effective Nov 20, 1998 - [AD 97-25-08](https://openairdocs.org/ad/97-25-08): General Electric CF700-2C, CF700-2D, CF700-2D-2 and 7 more. Effective Jan 2, 1998 - [AD 97-13-10](https://openairdocs.org/ad/97-13-10): Aft fan disk · General Electric CF700-2C, CF700-2D and CF700-2D-2. Effective Aug 26, 1997 - [AD 85-18-03](https://openairdocs.org/ad/85-18-03): Stage 1 Turbine Disk · General Electric CF700-2D, CF700-2D-2, CJ610-8A and 1 more. Effective Nov 15, 1985 - [AD 80-08-06 R1](https://openairdocs.org/ad/80-08-06-R1): Turbine Disks · General Electric CF700-2D, CF700-2D-2, CJ610-8A and 1 more. Effective Feb 2, 1981 - [AD 75-05-13](https://openairdocs.org/ad/75-05-13): Compound Turbine And Fan Blade · General Electric CF700-2C, CF700-2D and CF700-2D-2. Effective Mar 3, 1976 - [AD 75-19-05](https://openairdocs.org/ad/75-19-05): Horizontal Drive Shaft · General Electric CF700-2C, CF700-2D, CF700-2D-2 and 1 more. Effective Sep 26, 1975 - [AD 73-23-05](https://openairdocs.org/ad/73-23-05): First Stage Turbine Discs · General Electric CF700-2C, CJ610-1, CJ610-4 and 2 more - [AD 78-07-06](https://openairdocs.org/ad/78-07-06): Compressor Disks · General Electric CF700-2C, CF700-2D, CF700-2D-2 and 2 more - [AD 2000-01-09](https://openairdocs.org/ad/2000-01-09) (historical): General Electric Aircraft Engines CF700-2C, CF700-2D and CF700-2D-2. Effective Feb 11, 2000 ## Registered aircraft by registry model (OpenAirDocs) - [GE CF700 series](https://openairdocs.org/engine/ge-cf700-series): 27 aircraft (registry code 30010) - [GE CF700-2C](https://openairdocs.org/engine/ge-cf700-2c): 0 aircraft (registry code 30026) - [GE CF700-2D](https://openairdocs.org/engine/ge-cf700-2d): 0 aircraft (registry code 30027) - [GE CF700-2D-2](https://openairdocs.org/engine/ge-cf700-2d-2): 0 aircraft (registry code 30028) ## STCs approved under this data sheet (5) - [STC SE976SO](https://openairdocs.org/stc/SE976SO): Installation of an oil tank sight gauge on a G.E. oil tank, P/N6003T09P04.. JSF Aviation Services Inc. - [STC SE8674SW](https://openairdocs.org/stc/SE8674SW): Modification of the following engine oil tanks by adding a sight glass: 6002T03P01, 6002T03P03, 6003T09P01, 6003T09P02, 6003T09P03, 6003T09P04, 6003T89P01, 6003T89P02, 6003T03P02, 6002T03P04.. Bizjet International Sales & Support Inc - [STC SE966SO](https://openairdocs.org/stc/SE966SO): Manufacture and installation of Axis C gearshaft plugs per Fed Ex Drawing F-72-003, Sheets 1 and 2.. JSF Aviation Services Inc. - [STC SE1057SO](https://openairdocs.org/stc/SE1057SO): Installation of capacitance type probe with oil quantity indicating system in oil tank.. Aircraft Equipment Certification Corporation - [STC SE949SO](https://openairdocs.org/stc/SE949SO): Installation of an oil level sight gauge.. Aircraft Equipment Certification Corporation --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.