# STCs approved under this data sheet: TCDS E9EA

A list on [TCDS E9EA](https://openairdocs.org/tcds/E9EA.md).

Current certificates first, most recently changed first.

- [STC SE04651CH](https://openairdocs.org/stc/SE04651CH.md): To allow use of l00R grade aviation fuel meeting Swift Fuel, LLC specification SPEC-l00R-22 · Swift Fuels LLC
- [STC SE2932SW](https://openairdocs.org/stc/SE2932SW.md): Install carburetor air temperature indicator. Approved for Aircooled Motors (Franklin Engine Co.) equipped with float carburetors. Model eligibility included here may not be inclusive. · Alcor LLC
- [STC SE1311SO](https://openairdocs.org/stc/SE1311SO.md): Installation of Shivers carburetor temperature gauge with a Richter Aero Equipment B-5 carburetor temperature probe. · LegacySTC.com
- [STC SE208SO](https://openairdocs.org/stc/SE208SO.md): Installation of ice indicator in the carburetor. · LegacySTC.com
- [STC SE03309CH](https://openairdocs.org/stc/SE03309CH.md): Installation of Engine Preheat Kit, p/n TSP6CYL-2927-115 for 115 volt application · Hartzell Propeller Inc.
- [STC SE01966WI](https://openairdocs.org/stc/SE01966WI.md): Use of GAMI G100UL High Octane Unleaded Avgas in spark ignition piston aircraft engines · General Aviation Modifications Inc.
- [STC SE4178NM](https://openairdocs.org/stc/SE4178NM.md): Installation of oil filter kit · Franklin Aircraft Engines Inc.
- [STC SE02602AT](https://openairdocs.org/stc/SE02602AT.md): Installation of an alternate engine driven fuel pump in accordance with CJ Aviation "Installation Instructions for Fuel Pump 6005-2A", IR, dated 12/23/02, drawing no. 6005-2A "Fuel Pump", IR, dated 11/14/02 and drawing no. 6005-2B "Cap Plug", IR, dated 12/03/02 or later FAA approved revisions of either document. · C J Aviation
- [STC SE8776SW](https://openairdocs.org/stc/SE8776SW.md): Installation of coated cylinders and piston rings. · Continental Motors, Inc.
- [STC SE3331NM](https://openairdocs.org/stc/SE3331NM.md): Lycoming valve cover gasket · Real Gaskets Tennessee
- [STC SE110CH](https://openairdocs.org/stc/SE110CH.md): Installation of Slick Model 6399 magnetos. · Champion Aerospace LLC
- [STC SE1-201](https://openairdocs.org/stc/SE1-201.md): Installation of the Richter Aero Equipment Type B-4 or B-5 Temperature Probe. (O-360 SERIES (excl. A1C, C2B, C2D)) · MidContinent Instru Co Inc
- [STC SE1697GL](https://openairdocs.org/stc/SE1697GL.md): Installation of nose seal retainer. · Skaggs Robert G
- [STC SE78WE](https://openairdocs.org/stc/SE78WE.md): Install two locking pins in Franklin Part Number 21014J oil transfer collar, 180 degrees apart, to prevent rotation of oil seal in collar. · Yehnert Helicopters, Inc
- [STC SE77WE](https://openairdocs.org/stc/SE77WE.md): One Only STC Installation of two seal locking pins in the oil transfer collar, Serial No, 53005-3 · Huntington Beach Police Department
- [STC SE76WE](https://openairdocs.org/stc/SE76WE.md): Serial Number 53056-3 ONLY: Installation of two seal locking pins in the oil transfer collar in accordance with Yehnert Helicopter Drawing YH1049. · Robert R. Lewis
- [STC SE634SO](https://openairdocs.org/stc/SE634SO.md): Installation external oil supply routing and vent system to permit maintaining oil pressure in inverted position. · D'Arcy John J

## The whole list in SQL

Runs in DuckDB 1.2 or later on the release's Parquet files over HTTPS:

```sql
SELECT s.stc_number, s.description, s.holder, s.status, s.status_date
FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' s
WHERE s.stc_number IN (SELECT stc_number FROM 'https://openairdocs.org/data/latest/faa_stc_model.parquet' WHERE tcds_number = 'E9EA')
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number
```

This list as a web page: https://openairdocs.org/tcds/E9EA/stcs

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.