# TCDS P-870: Hamilton Standard Division - Type: Type certificate data sheet - Status: Current - Holder: Hamilton Standard Division - Revision: 11 - Revised: January 7, 1971 - Product: Propeller - Data sheet PDF: https://openairdocs.org/files/sha256/af/67/af6712409a1df5d6f986fcd9259b97254142a7c8006eee2bb3a6c55cb0344952 - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/5CB1D86D351D0FB88525670F006CF51B.0001 - Page: https://openairdocs.org/tcds/P-870 ## Models (1) As the data sheet lists them. - 242 ## What the data sheet says From the PDF's text layer, line by line; tables lose their columns. The PDF is the record. ```text Page No. 1 2 3 Rev. No. 11 11 11 DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION P-870 Revision 11 Hamilton Standard 242 January 7, 1971 TYPE CERTIFICATE DATA ASHEET NO. P-870 Propellers of models described herein conforming with this data sheet (which is a part of type certificate No. 870) and other approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in accordance with pertinent aircraft data sheets and applicable portions of the Civil Air Regulations/Federal Aviation Regulations provided they are installed, operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. Type Certificate Holder Hamilton Standard Division United Aircraft Corporation Windsor Locks, Connecticut 06096 Type Constant speed; hydraulic (see NOTES 3 and 4) Engine Shaft SAE No. 50, 51, 60 or X (X indicates special shaft sizes for foreign engines are eligible.) Hub Material Steel Blade Material Hollow steel with nylon rubber filler Number of Blades 4 Hubs Eligible 24250, 24260, 242X (see NOTE 1) Blade Eligible Maximum Continuous Takeoff Diameter Limits Hub & Blade Weight (See NOTE 2) HP RPM HP RPM (See NOTE 2) (Max. Diam) NOTES 2J17B3-8 16'4-7/8" (-8) 6 to 2800 960 3500 1020 to 750 lbs. 2J17B3-26 14'10-7/8" (-26) 2J17B4 is the left-hand version of 2J17B3. 5 2J17F3-8 16'4-7/8" (-8) 6 to to 2J17F3-26 14'10-7/8" (-26) 753 lbs. 2J17F4 is the left-hand version of 2J17F3. 5 2J17H3-8 16'4-7/8" (-8) 6 to 2800 960 3500 1020 to 761 lbs. 2J17H3-26 14'10-7/8" (-26) 2J17H4 is the left-hand version of 2J17H3. 5 2J17N3-24 15'7/8" (-24) 6 to 2650 1090 3500 1150 to 662 lbs. 2J17N3-50 12'10-7/8" (-50) 2J17N4 is the left-hand version of 2J17N3. 5 2J17Z3-8 16'4-7/8" (-8) 2, 6(*) to 2800 960 3500 1020 to 787 lbs. 2J17Z3-26 14'10-7/8" (-26) 2J17Z4 is the left-hand version of 2J17Z3. 5 2J17AG3-8 16'4-7/8" (-8) 6 to 2800 960 3500 1020 to 761 lbs. 2J17AG3-26 14'10-7/8" (-26) 2J17AG4 is the left-hand version of 2J17AG3. 5 2J17AM3-8 16'4-7/8" (-8) 2, 6(*) to 2800 960 3500 1020 to 787 lbs. 2J17AM3-26 14'10-7/8" (-26) 2J17AM4 is the left-hand version of 2J17AH3. 5 Certification Basis Type Certificate No. 870 issued 24 August 1948. P-870 2 Production Basis Production Certificate No. 14 NOTE 1. Hub Model Designation 2 4 2 60 - 300 See * below SAE propeller shaft size Blade shank size Number of blades Major model type *A dash number added to the propeller model designation indicates minor changes which do not affect eligibility. If number is above 300 it also indicates the complete blade assembly and all of the rotating deicing system components. NOTE 2. Blade Model Designation A 2 J 17 M 3 - 8 W Inboard closure contour, does not affect eligibility Nominal reduction from basic diameter in inches Direction of rotation and tip configuration and minor aerodynamic characteristics Structural and operational features Basic diameter in feet Major aerodynamic characteristics Hamilton Standard shank size Balance master, affects interchangeability but not eligibility. *Blade models 2J17Z3 and 2J17AH3 are nickel plated. Diameter limits shown are nominal diameters of the assembled propellers and do not include the +5/16, -1/16 inch manufacturing tolerance permissible for propellers with steel blades. NOTE 3. Pitch Control. Eligible with Hamilton Standard constant speed control only. NOTE 4. (a) Feathering. Eligible with full feathering controls installed in accordance with the propeller manufacturer's instructions. (b) Reversing. Eligible with reversing controls installed in accordance with manufacturer's instructions. NOTE 5. Left-Hand Models. The left-hand version of an approved propeller model is eligible at the same rating and diameter limitations as listed for the right-hand model. 3 P-870 NOTE 6. Interchangeable Blades. Only blades listed in the same group of the following listed groups are sufficiently similar aerodynamically and vibrationwise to permit interchangeability in the same diameter without a flight test. Blades with different model numbers should not be incorporated in the same propeller, except as noted below, and reference should always be made to the ratings of blades. Group (a) 2J17B3, 2J17F3, 2J17H3, 2J17AG3, 2J17B3/SK31339** and 2J17F3/SK31339** NOTE: These blades can be used interchangeably in the same propeller provided the prefix letter and cut-off dash numbers of the model designations are the same. Group (b) 2J17Z3 and 2J17AH3 *(Nickel plated blades) NOTE: These blades can be used interchangeably in the same propeller provided the prefix letter and the cut-off dash numbers of the model designations are the same. Further, when specifically indicated on the pertinent aircraft specification, the 2J17Z3 and 2J17AH3 blades can be used interchangeably in the same propeller with those blades listed in Group (a) of NOTE 6 of this specification, provided the 2J17Z3 or 2J17AH3 blades are used in pairs and installed in opposite area, or one 2J17Z3 and one 2J17AH3 are used as a pair and installed in opposite area, and that the prefix letters for opposite blades and the cut-off dash numbers for all blades are the same. **SK-31339 concerns reworking stiffener type blades to fairing type. NOTE 7. Accessories. (a) Propeller Deicing. (1) Electric. Eligible only with Hamilton Standard electrical deicing equipment installed in accordance with the propeller manufacturer's instructions. (2) Fluid. Eligible with Hamilton Standard fluid deicing slinger ring assemblies only. (b) Propeller Spinner. Eligible with spinner supplied by Hamilton Standard. Add 26 1/2 lb. when spinner used. NOTE 8. Shank Fairings. Not applicable. NOTE 9. Special Limits. Not applicable. NOTE 10. Special Notes. The word "eligible" as used herein does not signify approval. For approval, compliance with the applicable aircraft airworthiness requirements is necessary. ....END.... ``` ## ADs (5, in force first) - [AD 54-01-01](https://openairdocs.org/ad/54-01-01): Solenoid Valves · Hamilton Standard Division 232, 242, 34D and 3 more - [AD 54-01-02](https://openairdocs.org/ad/54-01-02): Stop Levers · Hamilton Standard Division 232, 242, 34D and 3 more - [AD 54-10-01](https://openairdocs.org/ad/54-10-01): Servo Piston Shaft · Hamilton Standard Division 232, 242 and 34D - [AD 55-09-04](https://openairdocs.org/ad/55-09-04): Hub · Hamilton Standard Division 242 - [AD 58-08-04](https://openairdocs.org/ad/58-08-04): Pitch Locks · Hamilton Standard Division 232, 242, 34D and 3 more ## STCs approved under this data sheet (1) - [STC SP00582NY](https://openairdocs.org/stc/SP00582NY): Installation of Prop-Guard Polyurethane Protective Tape on the leading edge of metal propellers.. McFarlane Aviation, Inc. --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.