# TCDS P1IN: Ratier-Forest Division de Figeac

- Type: Type certificate data sheet
- Status: Current
- Holder: Ratier-Forest Division de Figeac
- Revision: 3
- Revised: February 28, 2007
- Product: Propeller
- Certification basis: Part 14, Part 21
- Data sheet PDF: https://openairdocs.org/files/sha256/a0/a4/a0a49e318d5d7a202285ec3f874cf37cd5973425b999c98abae37ed26b5074b9
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/7B6C63B25A0261448625729C006FF3B3.0001
- Page: https://openairdocs.org/tcds/P1IN

## Models (2)

As the data sheet lists them.

- FH 76-1
- FH 76-2

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
U.S. DEPARTMENT OF TRANSPORTATION 
 
FEDERAL AVIATION ADMINISTRATION 
 
TYPE CERTIFICATE DATA SHEET P1IN 
 
P1IN 
REVISION:  3 
RATIER-FIGEAC 
FH-76 Series 
 
February 28, 2007
 
Propellers of models described herein conforming with this data sheet (which is a part of Propeller Type Certificate No. P1IN), 
and other approved data on file with the Federal Aviation Agency, meet the minimum standards for use in certificated aircraft in 
accordance with pertinent aircraft Data Sheets and applicable portions of the Civil Air Regulations provided they are installed, 
operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. 
 
Type Certificate Holder  RATIER-FIGEAC 
    B .P. N°2 
    46101 FIGEAC Cedex 
    F RANCE 
 
Type Turbine propeller, electrically controllable  -  feathering and reversing 
 
Engine shaft Integral with propeller hub barrel 
 
Hub material Steel 
 
Blade material Aluminum alloy 
 
No. of blades 3 
 
Design series eligible FH 76-1-05, FH 76-1-06, FH 76-1-07, FH 76-1-09, FH 76-2-07 
 
 
Blades Eligible 
Maximum 
Continuous 
 
Takeoff 
 
Diameter 
 
Max. Weight 
(See Note 2) HP RPM HP RPM Limits complete, lb. 
       
FH 76-205 473 2200 523 2200 83.5" - 82.5" 142.5 
FH 76-206 473 2200 523 2200 75.6" - 74.6" 150.2 
FH 76-207 473 2080 523 2080 98.4" - 97.4" 157.0 
FH 76-209 473 2200 523 2200 81.1" - 80.1" 142.5 
FH 76-2-260 630 2066 670 2066 98.51" - 98.43" 163.8 
 
Certification basis FAR Section 21.29 and French Standard AIR 2051 Chapter 9.  (AIR 2051 Chapter 9  
 certified by Secretariat Generale a l'Aviation Civile as equivalent to CAR Part 14 as  
 amended to December 15, 1956, and Amendment 14-1). 
 
The FAA validated this product under U.S. Type Certificate Number P1IN. Effective September 
28, 2003, the European Aviation Safety Agency (EASA) began oversight of this product on behalf 
of the Government of France. 
 
TC (Import) No: None 
 
TC Application Date: September 19, 1960 
 
TC Issued : November 9, 1962 
 
Import requirements: To be considered eligible for installation on U.S. registered aircraft, each propeller to be 
exported to the United States shall be accompanied by a Certificate of Airworthiness for export 
endorsed by the Direction Générale de l’Aviation Civile (DGAC) on behalf of the European 
Community which contains the following language: 
 
 (1) This propeller conforms to its United States type design (TC No. P1IN) and is  
Page No. 1 2 3 
Rev. No. 3 3 3

P1IN 2 
  in a condition for safe operation. 
 
 (2) This propeller has been subjected by th e manufacturer to a final operational check  
  and is in a proper state of airworthine ss. Reference FAR Section 21.500 which provides 
  for the airworthiness acceptance of aircraft engines or propellers manufactured outside  
  the U.S. for which a U.S. type certificate has been issued.  Additional guidance is  
  contained in FAA Advisory Circular 21-23, Ai rworthiness Certification of Civil Aircraft,  
  Engines, Propellers and Related Produc ts, Imported  into the United States. 
 
NOTE 1. Propeller Model Designation.  The propeller model designation consists of a series of numbers suffixed to  
 the basic model designation (as shown below) to indicate Modifications and specifications. 
 
           Basic model designation 
            
F H 76 - 2 - 07 A 1 2 3 4   
           Cuff 
           Electrical pitch repeating instrument 
           Deicing 
           Removable hub 
           Non de-iced propellers 
           Specific design 
           Basic  modification 
           Design series 
           Propeller division 
           Manufacturer 
 
NOTE 2. Blade Model Designation 
 
FH 76 2 2 60  
     Specific design 
     Reference of corresponding subassembly drawing 
     Basic propeller modification 
     Basic model designation 
 
NOTE 3. Pitch Control.  76-1 Series eligible with Ratier-Figeac mechanical-electrical pitch control and indicator  
 system No. FH 76.1.500 or in addition electrical pitch repeater No. FH 138.550.76-2-07 eligible with 
 No. FH 76-2-500. 
 
NOTE 4. (a) Feathering
 Electrical feathering is accomplished with control in cockpit which also shuts off fuel to engine and is  
 installed in accordance with the propeller manufacturer's instructions. 
 
 Emergency hydraulic  feathering is also available with special pilot control provided by aircraft  
 manufacturer. 
 
 (b) Reversing
 Reversing is accomplished with the propeller pitch changing control designed to prevent inadvertent 
 operation. 
 
NOTE 5. Not applicable. 
 
NOTE 6. Interchangeable Blades
 Only blades that can be fitted without requiring re-balance or any other testing are eligible as interchangeable 
 blades, provided they are installed as a set of 3 to the propeller. 
 
NOTE 7. Accessories
 (a) Propeller Deicing
 Eligible with only Ratier-Figeac electrical deicing provisions.

3 P1IN  
 (b) Spinners 
 Eligible with only Ratier-Figeac spinner. 
 
 (c) Relay Box Not applicable (76-1; all types).  Eligible only with Ratier-Forest electric Relay Box 
  Model FH 170-1.  (76-2-07) 
 
NOTE 8. Not applicable. 
 
NOTE 9. Approved installations.  Propellers listed in this data sheet are approved vibrationwise only for use in the 
 engine-aircraft combinations shown below: 
 
Propeller Aircraft Engine Data Sheet
Model Model Model Aircraft Engine
     
FH 76-1-06 Beech-Sferma 60 Turbomeca Astazou II D, II-J A9IN E2IN 
FH 76-1-07 Pilatus PC-6/A Series Turbomeca Astazou II E, IIG 7A15 E2IN 
FH 76-2-07 Short Bros. & Harland 
  SC-7 Skyvan 
Turbomeca Astazou XIIH-1 A15EU E6EU 
 
NOTE 10. Service Information.  Each of the documents listed below must state that it is approved by the European  
Aviation Safety Agency (EASA) or – for approvals made before September 28, 2003 – by the DGAC.  Any 
such documents are accepted by the FAA and are considered FAA approved.  
   • Service bulletins,  
   • Structural repair manuals,  
   • Vendor manuals,  
   • Aircraft flight manuals, and  
   • Overhaul and maintenance manuals. 
 
.....END.....
```

## ADs (2, in force first)

- [AD 67-24-04](https://openairdocs.org/ad/67-24-04): Pitch Change Actuator · Ratier-Forest, Division de Figeac FH 76-1. Effective Aug 22, 1967
- [AD 67-14-08](https://openairdocs.org/ad/67-14-08): Magnesium Pitch Change Reduction Gear Housing · Ratier-Forest, Division de Figeac FH 76-1. Effective May 11, 1967

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
