# TCDS R00024AT: BHI Productions LLC

- Type: Type certificate data sheet
- Status: Current
- Holder: BHI Productions LLC
- Revision: 0
- Revised: February 12, 2026
- Product: Aircraft, Rotorcraft
- Certification basis: Part 21, Part 29
- Data sheet PDF: https://openairdocs.org/files/sha256/2b/0f/2b0fbe4e2ee9b00236cd86f29716c1aaa5955dfd52243e9d9a53a641a197d228
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID130333096220260219224508.0001
- Page: https://openairdocs.org/tcds/R00024AT

## Models (5)

As the data sheet lists them.

- UH-60A
- UH-60L
- T700-GE-700
- T700-GE-701C
- T700-GE-701D/CC

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
Page No. 1 2 3 4 5 6 7 8 
Rev. No. - - - - - - - - 
 
DEPARTMENT OF TRANSPORTATION 
FEDERAL AVIATION ADMINISTRATION 
 
 R00024AT 
Revision IR 
BHI Productions, LLC 
UH-60A  
UH-60L 
 
February 12, 2026 
 
TYPE CERTIFICATE DATA SHEET R00024AT 
 
This data sheet, which is a part of Type Certificate (TC) No. R00024AT, prescribes conditions and limitations under which the 
product for which the type certificate was issued meets the airworthiness requirements of the 14 Code of Federal Aviation 
Regulations (14 CFR). 
TYPE CERTIFICATE (TC) BHI Productions, LLC 
HOLDER: 10100 Aileron Ave 
 Pensacola, FL 32506 
 
I -MODEL UH-60A (Restricted Category Rotorcraft) Approved February 12, 2026 
 
ENGINES: (2) General Electric T700-GE-700 Original 
 (2) General Electric T700-GE-701C Alternate 
 (2) General Electric T700-GE-701D/CC Alternate 
 *See NOTE 9 for alternate engine information. 
 
FUEL: Aviation Kerosene JP-4, JP-5, JP-8, Jet A, Jet A-1 or Jet B. 
 *See NOTE 12 for alternate and emergency fuels. 
 
ENGINE LIMITS: (T700-GE-700) 
 
 
SHAFT 
HP 
 
POWER TURBINE 
RPM 
 
GAS GEN 
RPM 
 
POWER TURBINE 
INLET (TGT) 
Military Power (30 min.) 1,561 20,900 44,700 850º C 
     
Maximum Cont. Power 1,318 20,900 44,700 775º C 
     
ENGINE LIMITS:(T700-GE-701C) 
 
 
SHAFT 
HP 
 
POWER TURBINE 
RPM/% 
 
GAS GEN 
RPM/% 
 
POWER TURBINE 
INLET (TGT) 
Contingency Rated Power (CRP) 
(2 1/2 min. OEI) 
1,940 20,900/100 44,700/102 903º C 
     
Maximum Rating (10 Min. dual) 1,890 20,900/100 44,700/102 878º C 
     
Intermediate Rated Power (IRP) 
(30 min dual) 
1,800 20,900/100 44,700/102 851º C 
     
Maximum Continuous Power (MCP) 1,662 20,900/100 44,700/102 810º C

R00024AT Rev. IR Page 2 of 8  
 
  
ENGINE LIMITS: (T700-GE-
701D/CC) 
 
 
SHAFT 
HP 
 
POWER TURBINE 
RPM/% 
 
GAS GEN 
RPM/% 
 
POWER TURBINE 
INLET (TGT) 
Contingency Rated Power (CRP) 
(2 1/2 min. OEI) 
1,940 20,900/100 44,700/102 903º C 
     
Maximum Rating (10 Min. dual) 1,890 20,900/100 44,700/102 878º C 
     
Intermediate Rated Power (IRP) 
(30b min dual) 
1,800 20,900/100 44,700/102 851º C 
     
Maximum Continuous Power (MCP) 1,662 20,900/100 44,700/102 810º C 
 
 
 
TRANSMISSION LIMITS:   TORQUE: 
(UH-60A)   110% Single Engine (No time limit) 
 100% Dual Engine (No time limit) 
 
ROTOR LIMITS:   Power On  
    Maximum 107% (258 RPM)  
    Minimum 91% (219 RPM)  
 
    Power Off  
    Maximum 110% (265 RPM)  
    Minimum 90% (217 RPM)  
 
 
AIRSPEED LIMITS:   Vne Power on: 193 knots IAS, (221 MPH). See document BHIP-200-210 “BHIP  
    Rotorcraft Flight Manual” (UH-60A & UH-60L) for variation of Vne with gross weight,  
    pressure  altitude and temperature.  Refer to document no. BHIP-200-210, “BHIP  
    Rotorcraft Flight Manual”, Rev. IR, dated August 30, 2025, or later FAA approved  
revisions for additional limitation data.

R00024AT Rev. IR Page 3 of 8  
  
 
EMPTY WEIGHT C. G. RANGE: None 
 
DATUM:    341.2 inches forward of the main rotor centroid. 
 
LEVELING MEANS:   Plumb bob in L/H cabin door frame to leveling plate on cabin floor.  
Ref. TM 1-1570-237-23. 
 
MAXIMUM WEIGHT:   22,000 lbs. 
 
MINIMUM CREW:   2 (pilot, copilot) location at aircraft station 227.1 for both pilot and co-pilot 
 
NUMBER OF SEATS:   OEM established locations: 2 at Sta. 227.1; 1 at Sta. 262.0; 3 at Sta. 282.0;  
3 at Sta.320.7; 4 at Sta. 339.8; 4 at Sta.387.2.  Ref. BHIP-200-210 “BHIP Rotorcraft 
Flight Manual” Rev. IR, dated August 30, 2025, or lates FAA-approved revision. No 
passengers permitted. 
*See NOTE 11 for information on personnel carrying restrictions. 
 
MAX COMPARTMENT WEIGHT: Compartment C   Compartment D   Compartment E  
    Sta 247 to Sta 288   Sta 288 to Sta 343   Sta 343 to Sta 398   
    6460 lbs.    8370 lbs.    8370 lbs. 
 
FUEL CAPACITY:   361.5 gallons gravity; 2 tanks (LH & RH interchangeable) STA. 420.75 
359.7 gallons; 2 tanks (LH &RH interchangeable) (with fuel boost pumps installed) STA. 
 420.75  
 
OIL CAPACITY:    7 quarts each engine. 
 
OTHER LIMITS:   Refer to BHI Productions LLC documents no. BHIP-200-210 “Rotorcraft Flight Manual”  
Rev. IR, dated August 30, 2025, or later FAA-approved revision.

R00024AT Rev. IR Page 4 of 8  
 
  
 
II -MODEL NUMBER: UH-60L (RESTRICTED CATEGORY MILITARY SURPLUS) Approved February 12, 2026 
 
ENGINES: (2) General Electric T700-GE-701C Original  
 (2) General Electric T700-GE-701D/CC Alternate 
 
FUEL: Aviation Kerosene JP-4, JP-5, JP-8, Jet A, Jet A-1 or Jet B. 
 *See NOTE 12 for alternate and emergency fuels. 
 . 
ENGINE LIMITS:(T700-GE-701C) 
 
 
SHAFT 
HP 
 
POWER TURBINE 
RPM/% 
 
GAS GEN 
RPM/% 
 
POWER TURBINE 
INLET (TGT) 
Contingency Rated Power (CRP) 
(2 1/2 min. OEI) 
1,940 20,900/100 44,700/102 903º C 
     
Maximum Rating (10 Min. dual) 1,890 20,900/100 44,700/102 878º C 
     
Intermediate Rated Power (IRP) 
(30 min dual) 
1,800 20,900/100 44,700/102 851º C 
     
Maximum Continuous Power 
(MCP) 
 
1,662 20,900/100 44,700/102 810º C 
ENGINE LIMITS: (T700-GE-
701D/CC) 
 
 
SHAFT 
HP 
 
POWER TURBINE 
RPM/% 
 
GAS GEN 
RPM/% 
 
POWER TURBINE 
INLET (TGT) 
Contingency Rated Power (CRP) 
(2 1/2 min. OEI) 
1,940 20,900/100 44,700/102 903º C 
     
Maximum Rating (10 Min. dual) 1,890 20,900/100 44,700/102 878º C 
     
Intermediate Rated Power (IRP) 
(30 min dual) 
1,800 20,900/100 44,700/102 851º C 
     
Maximum Continuous Power 
(MCP) 
 
1,662 20,900/100 44,700/102 810º C 
TRANSMISSION LIMITS:   TORQUE: 
(UH-60L) 135% Single Engine (No time limit) 
 120% Dual Engine, at or below 80 KIAS (No time limit) 100% Dual Engine, above 80 
 KIAS (No time limit) 
  
ROTOR LIMITS:   Power On  
    Maximum 107% (258 RPM) 
    Minimum 91% (219 RPM)  
 
    Power Off  
    Maximum 110% (265 RPM)  
    Minimum 90% (217 RPM) 
   
AIRSPEED LIMITS:   Vne Power on: 193 knots IAS, (221 MPH). See document BHIP-200-210 “BHIP  
    Rotorcraft Flight Manual” (UH-60A & UH-60L) for variation of Vne with gross weight,  
    pressure  altitude and temperature.  Refer to document no. BHIP-200-210, “BHIP  
    Rotorcraft Flight Manual” Rev. IR, dated August 30, 2025, or later FAA approved  
revisions for additional limitation data.

R00024AT Rev. IR Page 5 of 8  
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
EMPTY WEIGHT C. G. RANGE: None 
 
DATUM:    341.2 inches forward of the main rotor centroid. 
 
LEVELING MEANS:   Plumb bob in L/H cabin door frame to leveling plate on cabin floor. 
Ref. TM 1-1570-237-23. 
 
MAXIMUM WEIGHT:   22,000 lbs. 
 
MINIMUM CREW:   2 (pilot, copilot) location at aircraft station 227.1 for both pilot and co-pilot 
NUMBER OF SEATS:   OEM established locations: 2 at Sta. 227.1; 1 at Sta. 262.0; 3 at Sta. 282.0;  
3 at Sta.320.7; 4 at Sta. 339.8; 4 at Sta.387.2.  Ref. BHIP-200-210 “BHIP Rotorcraft 
Flight Manual” Rev. IR, dated August 30, 2025, or later FAA-approved revision. No 
passengers permitted.  
*See NOTE 11 for information on personnel carrying restrictions. 
 
MAX COMPARTMENT WEIGHT: Compartment C   Compartment D   Compartment E  
    Sta 247 to Sta 288   Sta 288 to Sta 343   Sta 343 to Sta 398   
    6460 lbs.    8370 lbs.    8370 lbs. 
 
FUEL CAPACITY:   361.5 gallons gravity; 2 tanks (LH & RH interchangeable) STA. 420.75 
359.7 gallons; 2 tanks (LH &RH interchangeable) (with fuel boost pumps installed) STA. 
 420.75  
 
OIL CAPACITY:    7 quarts each engine. 
 
OTHER LIMITS:   Refer to BHI Productions LLC documents no. BHIP-200-210 “Rotorcraft Flight Manual”  
Rev. IR, dated August 30, 2025, or later FAA-approved revision.

R00024AT Rev. IR Page 6 of 8  
 
  
 
DATA PERTINENT TO ALL MODELS 
 
SERIAL NO. APPROVED: U.S. military surplus UH-60A & UH-60L Blackhawk helicopter as identified in Serial 
Number Approved Report Number BHIP-200-204 Rev. IR, dated February 12, 2026, or 
later FAA approved revision.   
 
CERTIFICATION BASIS: Title 14 CFR Part 21 § 21.25(a)(2) effective February 1, 1965, including Amendments21-
1 through 21-42 for the special purposes listed in FAR 21.25 (b)(1)(2)(7). 
 § 21.25(b) (1) Agriculture Operations 
 § 21.25(b) (2) Forest & Wildlife Conservation 
 § 21.25(b) (7) External Loads 
   
  
Note: In accordance with 14 CFR §36.1(a)(4), compliance with the noise requirements 
was not shown. Therefore, aircraft certificated under this Type Certificate are only 
eligible for (1) agricultural operations as defined in § 137.3; (2) aerial dispensing of fire 
fighting materials excepted by § 36.1(a) (4), and (3) external loads as defined in 
§133.1(b). 
 
Any alteration to the aircraft for Special Purposes not identified above require further 
FAA approval and in addition, may require noise and/or flight testing. 
 
This aircraft approved for day or night VFR operations only.  Flight into known icing 
conditions is prohibited. 
 
General Note: Any subsequent modifications to the helicopters type certified under this 
Type Certificate are to have the certification basis for that modification established under 
14 CFR part 21 § 21.101 published June 7, 2000 which became effective June 10, 2003.  
Otherwise non-significant modifications are to meet the requirements of 14 CFR 29 
airworthiness standards, transport category, Amendment 1, effective August 12, 1965 and 
14 CFR part 29 § 29.1529, Instructions for Continued Airworthiness, Amendment 20, 
effective September 11, 1980. 
    
DATE OF APPLICATION: February 18, 2022  
 
PRODUCTION BASIS: None.  No helicopters may be produced under this approval.  No helicopter serial number 
may be added to this type certificate unless approved by the cognizant Aircraft 
Certification Branch. Each helicopter must pass  a conformity inspection in accordance 
with this TCDS, plus any additional special instructions attached to the Request for 
conformity, FAA 8120- 10. In addition, a check by the Type Certificate holder or its 
agent, of the flight characteristics in accordance with applicable portions of MTF -1-
1520-237-MTF Maintenance Test Flight Manual for UH -60A, UH-60L & EH -60A 
Helicopters, dated 31 January , 2019, or later approved revision for BHIP UH-60 
helicopters.  
 
EQUIPMENT: The basic required equipment necessary for the particular special purpose operation must 
be installed for certification.  In addition, the following items of equipment must be on 
board the helicopter and available to the crew. 
 
 Model UH-60A and UH-60L 
 BHI Productions LLC “BHIP Rotorcraft Flight Manual” document no. BHIP-200-210 
Rev. IR, dated August 30, 2025, or later FAA approved revision 
 
 
NOTE 1: A current weight and balance report, including a list of equipment included in the 
certified empty weight, and loading instructions, when necessary, must be provided for 
each helicopter at the time of original airworthiness certification. 
 
NOTE 2: The following placards must be prominently displayed in the cockpit in full view of the  
pilots:

R00024AT Rev. IR Page 7 of 8  
  
 
 Placard No. 1 
 
THIS HELICOPTER MUST BE OPERATED IN COMPLIANCE WITH THE 
OPERATING LIMITATIONS SPECIFIED IN THE APPROVED HELICOPTER 
OPERATIONS MANUAL. 
 
 Placard No. 2 
 
 THIS ROTORCRAFT MUST BE OPERATED IN ACCORDANCE WITH THE 
RESTRICTED CATEGORY OPERATING LIMITATIONS OF 14 CFR PART 91.313. 
 
 Placard No. 3 
 
 EXTERNAL LOADS OPERATIONS:  Vne WILL BE DETERMINED FOR EACH 
PROPOSED EXTERNAL LOAD APPLICATION. 
 
NOTE 3: The helicopter(s) must be serviced, maintained, inspected, repaired and overhauled in 
accordance with the requirements specified in BHIP document no. BHIP-200-202 
“Instructions for Continued Airworthiness” Rev. D dated February 14, 2025, or later 
FAA accepted revisions, or inspected in accordance with other FAA accepted inspection 
programs.  The service life limited parts overhaul and retirement intervals for these 
helicopters is specified in BHIP-200-202 document “Instructions for Continued 
Airworthiness” Rev. D, dated February 14, 2025, or later FAA approved revisions.  A 
FAA approved/accepted copy must accompany each helicopter on delivery. 
 
NOTE 4: The builder’s data plate required by part 45 § 45.13 must be installed in accordance with 
document no. BHIP-200-300 Rev. B dated August 13, 2025 & drawing no. BHIP-001-
101 Rev. IR “Type Certificate Data Plate”, dated February 23, 2022 
 
NOTE 5: This helicopter must be operated in accordance with the Rotorcraft Flight Manual 
comprised of the following: 
 
(1) BHIP-200-210 “BHIP Rotorcraft Flight Manual”, Rev. IR, dated August 30, 2025, 
or later FAA approved revisions. 
 
NOTE 6: Prior to obtaining an original Airworthiness Certificate: 
 
A. Each helicopter must pass a conformity inspection in accordance with document no. 
BHIP-200-203 “Engineering Configuration”, Rev. D dated February 7, 2025 or later 
FAA approved revision.  The Engineering Configuration Report identifies the U.S. 
Army airframe changes, and special purpose modifications accomplished on that 
particular helicopter.   
 
B. Each helicopter must pass an inspection for any possible hidden damage and the 
military records reviewed for acceptability of any repairs or alterations. 
 
C. The maintenance, overhaul, and modification records of each helicopter must be 
reviewed for military changes that may affect the airworthiness of the helicopter.  
Modifications and changes of equipment that affect the safety or performance of the 
helicopter must be approved by the Federal Aviation administration. 
 
D. After the required inspections, the aircraft must be found to be in a good state of 
preservation, repair, and in a condition for safe operation. 
 
NOTE 7: A Restricted Category helicopter may not be operated in a foreign country without the 
express written approval of that country. 
 
NOTE 8: This helicopter has not been shown to meet the requirements of the applicable 
comprehensive and detailed airworthiness code as provided by Annex 8 to the 
Convention on International Civil Aviation.

R00024AT Rev. IR Page 8 of 8  
 
  
NOTE 9: Installation of T-700-GE-701D engines in accordance with MWO: 1-1520-237-20-3 
Modification instructions for the installation of T700-GE-701D engines and support 
components on UH-60A aircraft.   
 
 MWO: 1-1520-237-30-3 modification instructions for the installation of the auto relight 
and transient droop improvement for T700-GE-701D engine on UH-60A aircraft is 
approved for the helicopter models: 
 UH60A helicopters under this type certificate.  Performance information and limitations 
with T700-GE-701C or T700-GE-701D/CC engines are contained in chapter 7A of 
“Rotorcraft Flight Manual” document no. BHIP-200-210 Rev. IR dated August 30, 2025, 
or later FAA approved revision. 
 
NOTE 10: The Safety of Flight Compliance Report for the helicopter contained in BHI Productions 
LLC. document no. BHIP-200-205 “Airworthiness Directives & Military Safety 
Messages”, Rev. A, dated February 20, 2025, or later FAA Approved revision, must be 
complied with prior to original airworthiness certification. 
 
NOTE 11: No person may be carried onboard this aircraft unless that person is a flight crewmember; 
is a flight crewmember trainee; performs an essential function in connection with a 
special purpose operation for which the aircraft is certificated; or is necessary to 
accomplish the work activity directly associated with that special purpose. Reference 14 
CFR §91.313(d).  
 
NOTE 12: Alternative and emergency fuels are listed in document no. BHIP-200-210 “BHIP 
Rotorcraft Flight Manual”, Rev. IR, dated August 30, 2025, or later FAA approved 
revision. 
 
NOTE 13: Any alteration to the type design of this aircraft may require Instructions for Continued 
Airworthiness. These instructions must be submitted and accepted by the Administrator, 
prior to approval for return to service.  
 
NOTE 14: The certification life limits for the helicopter, its engine and appliances were based on 
satisfactory service history as designed and operated by the military.  Therefore, to 
operate and maintain the aircraft to the original acceptance criteria, and maintain its safe 
for intended use requirement, cycle counting and operational time tracking is required on 
certain critical components.  Ref. Document no. BHIP-200-202, “Instructions for 
Continued Airworthiness” Rev. D, dated February 14, 2025, or later FAA approved 
revisions. 
 
 
 
 
 
END
```

## ADs

None name its models.

## STCs approved under this data sheet (6)

- [STC SR02753LA](https://openairdocs.org/stc/SR02753LA): Installation of an engine Inlet Barrier Filter (IBF). Aerometals Inc.
- [STC SR02650SE](https://openairdocs.org/stc/SR02650SE): Installation of Station 34.5 Beam Modification. Timberline Aerospace LLC
- [STC SR12471AT](https://openairdocs.org/stc/SR12471AT): Installation of RMCI Health Useage and Monitoring System (HUMS). RMCI Inc.
- [STC SR00903DE](https://openairdocs.org/stc/SR00903DE): Installation of Left and Right, Hand Hold, Step and Step Fairing modification. Blackhawk Mission Equipment
- [STC SR12380LA](https://openairdocs.org/stc/SR12380LA): Installation of Aerocraft's External Load Mount Kit (ARC-H60ELM). Aerocraft Incorporated
- [STC SR02794LA](https://openairdocs.org/stc/SR02794LA): Installation of Ballast Box. Aerocraft Incorporated

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
