# TCDS TR7BO: Kaman Aerospace Corporation

- Type: Type certificate data sheet
- Status: Current
- Holder: Kaman Aerospace Corporation
- Revision: 6
- Revised: March 23, 2020
- Product: Aircraft, Rotorcraft
- Certification basis: Part 21, Part 27, Part 36
- Registered aircraft: 17, by the registry models matched to it (OpenAirDocs)
- Data sheet PDF: https://openairdocs.org/files/sha256/52/e1/52e1f02ec74fec2b734dcb0a29c592637ddabe1644ba8cd1fa26a9834566c618
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/ABCC254128837AAA862585350057E361.0001
- Page: https://openairdocs.org/tcds/TR7BO

## Models (1)

As the data sheet lists them.

- K-1200

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
PAGE No. 1 2 3 4 5 
REV No. 6 4 6 5 4 
 
DEPARTMENT OF TRANSPORTATION 
FEDERAL AVIATION ADMINISTRATION 
 
TR7BO 
Revision 6 
Kaman 
MODEL K-1200 
 
March 23, 2020 
 
TYPE CERTIFICATE DATA SHEET NO. TR7BO 
 
This data sheet, which is part of Type Certificate Number TR7BO, prescribes conditions and limitations under which the product 
for which the Type Certificate was issued meets the airworthiness requirements of the Federal Aviation Regulations. 
 
TYPE CERTIFICATE HOLDER Kaman Aerospace Corporation 
P.O. Box 2 
Bloomfield, Connecticut 06002 
 
I.  MODEL   Model K-1200 (Normal Category Rotorcraft), Approved August 30, 1994 . 
 
ENGINES 1 Honeywell (Textron Lycoming) T5317A-1 (TCDS E17EA) 
 
FUEL Grades JP-4, JP-5 and JP-8.  Jet A, Jet A-1, Jet B, and PRC No. 3. 
See Notes 4 and 5. 
 
OIL Engine - Type MIL-L-7808 or MIL-L-23699.  See Note 6. 
 
Transmission - Dexron II or Dexron III 
 
ENGINE LIMITS SEA LEVEL STATIC/STANDARD DAY 
 
 Engine 
Torque 
Pressure 
Gas Generator 
Speed 
(25,150 r.p.m.=100%) 
Exhaust Gas 
Temperature 
(T9) 
 
Takeoff 65 psi 26,400 r.p.m.(105%) 648C 
Maximum Continuous 61 psi 25,400 r.p.m.(101%) 626°C 
 
TRANSMISSION LIMITS TORQUE PRESSURE 
 
 NO EXTERNAL LOAD WITH EXTERNAL LOAD 
 
Takeoff 40 psi 58 psi (0 - 25 Knots) 
45 psi (> 25 Knots) 
Maximum Continuous 40 psi 45 psi (0 - 80 Knots) 
   
ROTOR LIMITS 
 
 
 
 
 
 
 
 
 
 
 
POWER OFF 
Maximum 100% Nr (260 r.p.m.) 
Minimum 75% Nr (195 r.p.m.) 
 
POWER ON 
Maximum 105% Nr (273 r.p.m.)  
Minimum 100% Nr (260 r.p.m.) ≤ 7,000 pounds 
Minimum 104% Nr (270 r.p.m.) > 7,000 pounds 
Minimum 104% Nr (270 r.p.m.) for operations above 10,000 feet density altitude 
 
Maximum 100% Nr (260 r.p.m.) for ground extended operations

TR7BO 2 of 5  
 
 
TRANSMISSION LIMITS TORQUE PRESSURE 
 
AIRSPEED LIMITS 
   VNE (never exceed) Power On 
 
No External Load: 
100 KIAS, S.L. to 5,000 feet density altitude.  Decrease 3 knots/1,000 ft. above 5,000 
ft. density altitude. 
90 KIAS, S.L. to 8,000 feet density altitude.  Decrease 3 knots/1,000 ft. above 8,000 ft. 
density altitude. (IFR, See Note 9) 
70 KIAS (with HEC, See Note 10) 
 
With External Load: 
80 KIAS, S.L. to 5,000 feet density altitude.  Decrease 3 knots/1,000 ft. above 5,000 ft. 
density altitude. 
 
   VNE Power Off 80 KIAS, S.L. to 5,000 feet density altitude.  Decrease 3 knots/1,000 feet above 5,000 
feet density altitude. 
 
MAXIMUM GROUNDSPEED 25 knots (nose wheel locked) 
10 knots (nose wheel unlocked) 
 
CENTER OF GRAVITY (C.G.) C.G. GROSS WEIGHT LATERAL C.G. LIMITS 
RANGE 167.0 inches 5,000 to 12,000 pounds ± 1.25 inches 
 169.5 inches 12,000 pounds ± 1.25 inches 
 171.0 inches 
172.0 inches 
7,000 pounds 
6,000 to 5,000 pounds 
± 1.25 inches 
± 1.25 inches 
 
 Straight-line variation between points shown. 
 
EMPTY WEIGHT C.G. RANGE 
 
None 
 
DATUM 6.265 inches forward of nose. 
 
LEVELING MEANS 
 
No leveling plate; level at cockpit door sill per instructions in Section 08-00-00 of 
Kaman Model K-1200 K-MAX Maintenance and Servicing Instructions, Manual 
KMM. 
 
MAXIMUM WEIGHT 
 
No External Load:  7,000 pounds   (See Notes 7, 8, and 11) 
With External Load:  12,000 pounds 
 
MINIMUM CREW 1 at 108.0 inches 
 
NUMBER OF SEATS 1 at 108.0 inches 
 
MAXIMUM BAGGAGE 500 pounds; 100 lbs./sq. ft. 
  
FUEL CAPACITY 228.5 gals. (219.5 usable) at 161.83 (See Note 1)  
 
OIL CAPACITY 3.21 gals. 
 
MAXIMUM OPERATING 
(DENSITY) ALTITUDE 
 
15,000 feet (day/night VFR) 
12,000 feet (IFR) 
AMBIENT TEMPERATURE 
LIMITS 
 
-32°C (-25.6°F) to +49°C (+120°F) 
 
ROTOR BLADE CONTROL 
MOVEMENTS 
For rigging information, refer to Section 67-00-00 of Kaman Model K-1200  
K-MAX Maintenance and Servicing Instructions, Manual KMM. 
 
MANUFACTURER'S SERIAL 
NUMBERS 
A94-0002, A94-0004 and up are eligible.

3 of 5 TR7BO 
 
CERTIFICATION BASIS Type Certificate No. TR7BO:  Issued August 30, 1994, Application on July 30, 1990:  
FAR, Part 27, effective February 1, 1965, and amendments 27-1 through 27-28. 
 
Equivalent safety finding for FAR 27.173(b) Static Logitudinal Stability. 
 
FAR, Part 36, effective December 1, 1969, and amendments 36-1 through 36-20. 
 
Production rotorcraft modification additional requirements as follows: 
Induction System Icing Protection:  Compliance has been established with the 
falling and blowing snow requirements of FAR 27.1093(b)(1)(ii). 
 
Restricted Category FAR 21.25(a)(1).  See Note 7. 
 
Maximum weight of 6,500 pounds:  Grant of Exemption from FAR 27.1(a), 
Exemption No. 6433 (Regulatory Docket No. 009SW), dated April 25, 1996 .  See 
Note 8. 
 
Airworthiness Criteria for Helicopter Instrment Flight:  Compliance has been 
established with with instrument flight rules (IFR) operational requirements of 
Appendix B to FAR 27.  See Note 9. 
 
External Loads:  Compliance has been established with the personnel carrying 
device system (PCDS) applicable portions of FAR 27.865, Amendment 27-36 for 
human external cargo (HEC).  See Note 10. 
 
Maximum weight of 7,000 pounds without external load:  Approved June 23, 
2005.  Compliance has been established with FAR, Part 27, effective February 1, 
1965, and Amendments 27-1 through 27-37 except FAR 27.561(c), 
27.865(b)(3)(ii) and 27.1365(c).  See Note 11. 
 
Avionics, Loud Hailer, Anti-collision Lights, and Lateral and Longitudinal Trim 
Actuators Replacement:  Approved June 30, 2017.  Compliance has been 
established with 27.1309(a)(b)(c) and 27.1316(a)(1)(2)(b) as amended by 
Amendment 27-46, 27.1317(a)(1)(2)(3)(4)(b)(c)(d)(1)(2)(3) as amended b y 
Amendment 27-42, and A27.4 as amended by Amendment 27-47.  Effective at 
Serial Number A94-0039 and subsequent. 
 
Parking Brake Replacement:  Approved June 30, 2017.  Compliance has been 
established with 27.1309(a)(c) as amended by Amendment 27-46.  Effective at 
Serial Number A94-0039 and subsequent. 
 
Helicopter fuel system safety per FAA Reauthorization Act of 2018 Section 317, 
enacted October 05, 2018:  Approved March 23, 2020.  Compliance has been 
established with 49 U.S.C. §44737 (2018) [27.952(a)(1)(2)(3)(5)(6)(c)(f)(g), 
27.963(g) and 27.975(b) as amended by Amendment 27-30].  Effective at Serial 
Number A94-0053 and subsequent. 
 
In-Service rotorcraft modification additional requirements as follows: 
Service Bulletins and other service information, when FAA approved, will carry a 
statement to that effect. 
 
PRODUCTION BASIS Production Certificate No. 117NE. 
 
EQUIPMENT The basic required equipment, as prescribed in the applicable airworthiness regulations 
(see Certification Basis), must be installed in the helicopter for certification.  In 
addition, the following FAA approved rotorcraft flight manual is required:  Kaman K-
1200 Helicopter Rotorcraft Flight Manual.

TR7BO 4 of 5  
 
 
 -  NOTES  - 
 
NOTE 1:  A current weight and balance report, including list of equipment included in 
certificated empty weight and loading instructions when necessary, must be provided 
for each helicopter at the time of original certification. 
 
See FAA-approved Rotorcraft Flight Manual loading section for fuel weight and 
moment-arm variations with fuel type and fuel quantity. 
 
NOTE 2: All placards required in the FAA-approved Rotorcraft Flight Manual must be installed 
in the appropriate locations.  The following placard must be displayed in front of and 
in clear view of the pilot: 
 
   "THIS AIRCRAFT MUST BE OPERATED IN COMPLIANCE WITH THE  
    OPERATING LIMITATIONS SPECIFIED IN THE FAA APPROVED 
    FLIGHT MANUAL." 
 
NOTE 3: Information essential to the proper maintenance of the helicopter is contained in the 
Kaman Model K-1200 K-MAX Maintenance and Servicing Instructions, Manual 
KMM, provided with each helicopter.  The values of retirement (service) life contained 
in Chapter 4 or inspection intervals cannot be increased without FAA engineering 
approval. 
 
NOTE 4: See Section 10 of the FAA-approved Rotorcraft Flight Manual for the complete listing 
of approved Jet A, Jet A-1, Jet B, Mil-T-5624 and all equivalent fuels.  Equivalent 
fuel: MIL-T-83133, Grade JP-8, may also be used.  Use of kerosene fuels (JP-4 or JP-
5) should be avoided when starting at ambient temperatures below -12°C (10°F).  
Commercial fuels made to conform to ASTM Specification D 1655 do not contain 
anti-icing additives unless specified by bulk purchaser.  Care must be taken with these 
fuels with respect to water contamination and flight conditions. 
 
NOTE 5: Anti-icing, anti-corrosion and biocidal additives specified in Section 10 of the FAA-
approved Rotorcraft Flight Manual may be used singly or in any combination.  The 
specified additives should not be added to fuel MIL-T-5624, Grades JP-4 and JP-5, or 
to fuel MIL-T-83133, Grade JP-8, since they are already present in these fuels. 
 
NOTE 6: Approved engine oil brands are listed in Section 10 of the FAA-approved Rotorcraft 
Flight Manual 
 
NOTE 7: The helicopter is certificated in the Restricted Category (Approved June 9, 1995), 
under FAR 21.25, for the special operations of: 
 Agriculture as defined in FAR 137.3; 
 Dispensing of fire fighting materials; and 
 Carrying external loads as defined in FAR 133.1(b). 
The special purpose operations may be conducted in the Restricted Category at 
maximum weights above 6,000 pounds up to and including 6,500 pounds.  The aircraft 
marking requirements of FAR 45.21 and 45.23 applicable to the Restricted Category 
must be met.

5 of 5 TR7BO 
 
NOTE 8: Grant of Exemption No. 6433, dated April 25, 1996, allows increase in maximum 
gross weight from 6,000 pounds to 6,500 pounds while maintaining the original 
Normal Category rotorcraft certification.  The exemption is subject to the following 
conditions and limitations: 
 The design of the helicopter cannot be changed to add passengers as 
part of the gross weight increase. 
 Prior to exercising the privileges of this exemption, each K-1200 
helicopter (for which exemption is sought) and all modifications made 
to it, must meet the requirements established in the current certification 
basis, at the increased gross weight.  This includes any special 
requirements for certification; i.e., equivalent levels of safety and 
special conditions that may have been issued to complete certification. 
 All operations above 6,000 pounds must be limited to agricultural 
operations as defined in FAR 137.3; dispensing fire fighting materials; 
or carrying external loads as defined in FAR 133.1(b); unless a part 36 
noise test is conducted prior to increasing the gross weight above 6,000 
pounds. 
 
NOTE 9: Operation under the instrument flight rules (IFR) of Appendix B of FAR 27 approved 
May 14, 1999 for Serial Numbers A94-0002 through A94-0038 only.  See FAA-
approved Rotorcraft Flight Manual for limitations, operational requirements, required 
equipment, and weight-and-balance considerations. 
 
NOTE 10: A personnel carrying device system (PCDS) for carrying human external cargo (HEC) 
was approved February 13, 1998.  The PCDS is limited to carriage of personnel 
defined in FAR 133.35(a).  See FAA-approved Rotorcraft Flight Manual for 
limitations, operational requirements, and weight-and-balance considerations. 
 
NOTE 11: Original certification basis limited maximum weight to 6,000 pounds or less.  
Restricted Category (see Note 7) permitted operation to 6,500 pounds pending Grant 
of Exemption No. 6433 (see Note 8).  FAR, Part 27, amendment 37, changed the 
maximum weight to 7,000 pounds or less.  Maximum weight of 7,000 pounds without 
external load approved June 23, 2005. 
 
- END -
```

## ADs (9, in force first)

- [AD 2016-08-21](https://openairdocs.org/ad/2016-08-21): Main Rotor Control · Kaman Aerospace K-1200. Effective May 31, 2016
- [AD 2015-14-04](https://openairdocs.org/ad/2015-14-04): Main Rotor MRB · Kaman Aerospace K-1200. Effective Aug 17, 2015
- [AD 2010-26-11](https://openairdocs.org/ad/2010-26-11): Main Rotor Blades · Kaman Aerospace K-1200. Effective Jan 5, 2011
- [AD 2004-13-26](https://openairdocs.org/ad/2004-13-26): Main rotor blade (blade) grips · Kaman Aerospace K-1200. Effective Jul 22, 2004
- [AD 2001-13-03 R1](https://openairdocs.org/ad/2001-13-03-R1): Flap clevis · Kaman Aerospace K-1200. Effective May 27, 2003
- [AD 2000-18-10](https://openairdocs.org/ad/2000-18-10): Sprag Clutches · Kaman Aerospace K-1200. Effective Sep 26, 2000
- [AD 99-26-04](https://openairdocs.org/ad/99-26-04): Clutch Assembly · Kaman Aerospace K-1200. Effective Feb 8, 2000
- [AD 2021-23-13](https://openairdocs.org/ad/2021-23-13) (historical): Ground Proximity System · Airbus Helicopters K-225, K-190A, K-240 and 237 more. Effective Dec 9, 2021
- [AD 2001-13-03](https://openairdocs.org/ad/2001-13-03) (historical): Rotor Shaft and Teeter Pin Assembly · Kaman Aerospace K-1200. Effective Aug 1, 2001

## Registered aircraft by registry model (OpenAirDocs)

- [Kaman Aerospace K-1200](https://openairdocs.org/model/kaman-aerospace-k-1200): 17 aircraft (registry code 13027LS)

## STCs approved under this data sheet (11)

- [STC SR04464NY](https://openairdocs.org/stc/SR04464NY): Installation of the iPad Mount. Avio Design Group Inc.
- [STC SR01767SE](https://openairdocs.org/stc/SR01767SE): Manufacture of Isolair Eliminator Model 4600-K1200 Fire Fighting System. Isolair Inc.
- [STC SH3319NM](https://openairdocs.org/stc/SH3319NM): Installation of Precise Flight Pulselite Control Unit in the
Landing /Taxi Recognition Visual Control Light system,. Precise Flight Inc
- [STC SR02704SE](https://openairdocs.org/stc/SR02704SE): Installation and maintenance of the Sunspot 36 and 46 series lights. AeroLED's Holdings LLC
- [STC SR00359BO](https://openairdocs.org/stc/SR00359BO): Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights.. Whelen Aerospace Technologies
- [STC SR02394AK](https://openairdocs.org/stc/SR02394AK): Replacement of existing landing and/or hover light bulbs with Light Emitting Diode (LED) lighting system. Seaplanes North LLC
- [STC SR00103SE](https://openairdocs.org/stc/SR00103SE): Installation of Aviation Development Corporation oil filter. Aviation Development Corporation
- [STC SR01561SE](https://openairdocs.org/stc/SR01561SE): Installation of the Model 36300 Auxiliary Hydraulic System.. Kawak Aviation Technologies Inc
- [STC SR01587SE](https://openairdocs.org/stc/SR01587SE): Installation of the Model 36400 Fire Tank System.. Kawak Aviation Technologies Inc
- [STC SR00811NY](https://openairdocs.org/stc/SR00811NY): Installation of Technisonic Industries Limited TFM-138 series transceiver models.. Technisonic Industries Limited
- [STC SR01834NY](https://openairdocs.org/stc/SR01834NY): Installation of Globalstar Satellite Telephone System.. Atlantic Avionics Inc.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
