Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-11
Figure 5-13. HPC Surface Analysis Chart for Aviation Interests – Contiguous U.S. Example
Figure 5-14. HPC Surface Analysis Chart for Aviation Interests – South central U.S. Example
Aviation Weather Services, Advisory Circular 00-45F, Revision 1
5.1.3 OPC and WFO Honolulu Surface Analysis Charts The Ocean Prediction Center (OPC) in Camp Spring, Maryland is responsible for the Atlantic and Pacific Oceans north of 30°N latitude. The charts are found at:
• http://www.opc.ncep.noaa.gov/ The Weather Forecast Office in Honolulu, Hawaii (WFO HNL) is responsible for the tropical Pacific Ocean, south of 30°N latitude and west of 160°E longitude. The charts are found at:
• http://www.prh.noaa.gov/hnl/pages/analyses.php
5.1.3.1 Issuance The Ocean Prediction Center (OPC) produces surface analysis charts for the Atlantic and Pacific Oceans north of 30°N latitude four times daily (Table 5-2). The Weather Forecast Office in Honolulu, Hawaii (WFO HNL) issues surface analysis charts for the tropical Pacific Ocean, south of 30°N latitude and west of 160°E longitude four times daily. Surface analysis charts for the North Pacific are jointly issued by both offices.
Table 5-2. OPC and WFO Honolulu Surface Analysis Charts Issuance Schedule UTC 00 06 12 18
5.1.3.2 Analysis Symbols Figure 5-15 shows analysis symbols used on OPC and WFO HNL surface analysis charts.
H 30 MODERATE ICING TEXT ABBREVIATIONS:
1024 AND PRES IN MBS 24HR HIGH PRES MOVI O HEAVY ICING STORM = 48-63 KT GALE = 34-47 KT HIGH PRES CENTER WIND BARBS: HURCN => 64 KT WITH PRES IN MBS = 5 KT KI = KNOTS, G = GUSTS 99 HR = HOUR 10 KT MBS = MILLIBARS LOW PRES 996 CENTER AND PRES 24HR LOW PRES MOVI IN MBS = 20 КТ 15 KT PRES = PRESSURE HURCN = HURRICANE DSIPT = DISSIPATED WITH PRES IN MBS = 25 KT SINRY = STATIONARY = 35 KT WKNG = WEAKENING COLD FRONT = 50 кТ RPDLY = RAPIDLY FRMG = FORMING = 60 KT MOVG = MOVING WARM FRONT - = 65 KT TROF = TROUGI AlL =75 KT TRPCL = TROPICAI INLD = INLANI SINRY FRONT L = 100 KT DVLPG = DEVELOPING OCCLUDED FRONT L =110 KT COMB = COMBINING DCRS = DECREASING RIDGE LIL = 120 KT INCR = INCREASING INTSFYG = INTENSIFYING ) HURCN TROF • HURCN SOUTHERN HEMISPHERE PSN = POSITION Q TRPCL STORM I TROPICAL DEPRESSION « TROPICAL DISTURBANCE Figure 5-15. OPC and WFO HNL Surface Analysis Chart Symbols AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-12
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-13
Figure 5-16. WFO HNL Surface Analysis Chart – North Pacific Example
5.1.3.3 Wave Information Period and height of waves are represented by a 5-digit code. The first digit is always 1. The second and third digits describe the wave period (in seconds), and the final two digits give the wave height (in half meters). Below are two examples:
10603 1 - A group identifier. The first digit will always be 1.
06 - The wave period is 6 seconds.
03 - The wave height is 3 half meters.
10515 1 - The group identifier again.
05 - The wave period is 5 seconds.
15 - Wave height is 15 half meters.
In certain charts by the OPC, only the wave height (in feet) is plotted.
5.1.3.4 Analyses Isobars, pressure systems, and fronts are the most common analyses depicted on the surface analysis charts.
5.1.3.4.1 Isobars An isobar is a line of equal or constant pressure commonly used to analyze pressure patterns.
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-14 On a Surface Analysis Chart, isobars are solid lines usually spaced at intervals of 4 millibars (mb). Each isobar is labeled. For example, 1032 signifies 1,032.0 mb and 992 signify 992.0 mb.
METAR/SPECI (Section 2.1) reports pressure in hectopascals. However, one millibar is equivalent to one hectopascal, so no conversion is required.
5.1.3.4.2 Pressure Systems On a Surface Analysis Chart, a High (H) is a maximum of atmospheric pressure, while a Low (L) is a minimum of atmospheric pressure. Central pressure is the atmospheric pressure at the center of a High or Low -- the highest pressure in a High and the lowest pressure in a Low. The central pressure is denoted near each pressure center. Tropical storms, hurricanes, and typhoons (See Figure 5-15) are low-pressure systems with their names and central pressures denoted.
A trough or an elongated area of low atmospheric pressure is denoted by dashed lines and identified with the word TROF. A ridge or an elongated area of high atmospheric pressure is denoted with saw-toothed symbols. Ridges are rarely denoted on charts produced by the HPC.
5.1.3.4.3 Fronts The analysis shows positions and types of fronts by the symbols in Figure 5-15. The symbols on the front indicate the type of front and point in the direction toward which the front is moving.
Two short lines across a front indicate a change in front type.
5.1.4 TPC Surface Analysis Charts The Tropical Prediction Center (TPC) in Miami, Florida is responsible for the tropical regions of the western hemisphere south of 30oN latitude and east of 160oE longitude. The surface analysis chart is located at:
http://www.nhc.noaa.gov/marine_forecasts.shtml
5.1.4.1 Issuance The Tropical Prediction Center (TPC) issues Surface Analysis Charts for tropical regions of the western hemisphere south of 30oN latitude and east of 160oE longitude four times a day (Table 5-3).
Table 5-3. TPC Surface Analysis Charts Issuance Schedule Valid Time (UTC) 00 06 12 18
5.1.4.2 Analysis Symbols Figure 5-17 shows analysis symbols used on TPC surface analysis charts.
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 †1024 TITH PRES IN MILLIBARS CENTER OF HIGH PRES TRPCL × 999 WITH PRES IN MILLIBARS CENTER OF LOW PRES DEPRESSION STORM (TS) — 10 KT 5 KT COLD FRONT • HURRICANE (HRON) •— 15 KT 20 KT L 25 КТ WARM FRONT P CONVECTION GALE OR TRPCL STORM W- 35 KT STATIONARY FRONT TRPCL - 50 KT STORM WAVE Ille 74 KT HRCN
OCCLUDED FRONT TEXT ABBREVIATIONS M 105 KT DRY LN KT KNOTS 24 HR HIGH PRES
FT FEET MOVEMENT " SQUALL LN NIM NAUTICAL MILES GUSTS
TROF LN HRCN - HURRICANE TRPCL- TROPICAL 24 HR LOW PRES
PRES - PRESSURE MOVEMENT
RIDGE AXIS IN TROF - TROUGH LINE
MONR - SOAIIONARY MOVING Figure 5-17. TPC Surface Analysis Chart Symbols SON 1028 04 1026 1026 | 24 SINRY 30м 20 TROF 1016) 20 08 08- 12 09 12 1007 XX
IPC PSN Se 120KT ITCZI 994 • ITCZ.
N 35 30 0900T 5055КГ 6 65К PS% los .
16 16 130W 120W 110W 100W 90K .... 80W. 16 10y 16 G0H 50W 30W 20W O6Z TROPICAL SURFACE ANALYSIS SALLOP LINES2004 TROPICAL PREDICTION CENTER SSUED: FLORIDA THUNDERSTORMS: COLLABORATING CENTERS! ANALYST: FORMOSA TPČ OPC HPC HFO Figure 5-18. TPC Tropical Surface Analysis Chart Example
5.1.4.2.1 Wind Wind is plotted in increments of 5 knots (kts). The wind direction is in "true" degrees and is depicted by a stem (line) pointed in the direction from which the wind is blowing. The wind speed is determined by adding up the value of the flags (50 kts), lines (10 kts), and half-lines (5 kts), each of which has the following individual values:
AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-15
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-16
A single circle over the station with no wind symbol indicates a calm wind.
Figure 5-19 shows some sample wind symbols:
Figure 5-19: TPC Surface Analysis Chart Wind Plotting Model
5.1.4.3 Analyses Isobars, pressure systems, and fronts are the most common analyses depicted on the surface analysis charts.
5.1.4.3.1 Isobars An isobar is a line of equal or constant pressure commonly used to analyze pressure patterns.
On a Surface Analysis Chart, isobars are solid lines usually spaced at intervals of 4 millibars (mb). Each isobar is labeled. For example, 1032 signifies 1,032.0 mb and 992 signify 992.0 mb.
METAR/SPECI (Section 2.1) reports pressure in hectopascals. However, one millibar is equivalent to one hectopascal, so no conversion is required.
5.1.4.3.2 Pressure Systems On a Surface Analysis Chart, a High (H) is a maximum of atmospheric pressure, while a Low (L) is a minimum of atmospheric pressure. Central pressure is the atmospheric pressure at the center of a High or Low -- the highest pressure in a High and the lowest pressure in a Low. The central pressure is denoted near each pressure center. Tropical storms, hurricanes, and
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-17 typhoons (See Figure 5-17) are low-pressure systems with their names and central pressures denoted.
A trough or an elongated area of low atmospheric pressure is denoted by dashed lines and identified with the word TROF. A ridge or an elongated area of high atmospheric pressure is denoted by saw-toothed symbols. Ridges are rarely denoted on charts produced by the TPC.
5.1.4.3.3 Fronts The analysis shows positions and types of fronts by the symbols in Figure 5-17. The symbols on the front indicate the type of front and point in the direction toward which the front is moving.
Two short lines across a front indicate a change in front type.
5.1.5 Unified Surface Analysis Chart The Unified Surface Analysis Chart is a composite of all the surface analysis charts produced by HPC, OPC, TPC and WFO Honolulu. It contains an analysis of isobars, pressure systems and fronts.
5.1.5.1 Issuance The chart is issued four times daily by the OPC (see Table 5-4).
Table 5-4. Unified Surface Analysis Chart Issuance Schedule Valid Time (UTC) 00 06 12 18
Figure 5-20. Unified Surface Analysis Chart Example
5.1.5.2 Analysis Symbols Figure 5-21 shows analysis symbols used on the Unified Surface Analysis charts.
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-18
Figure 5-21. Unified Surface Analysis Chart Symbols
5.1.5.3 Analyses Isobars, pressure systems, and fronts are the most common analyses depicted on the surface analysis charts.
5.1.5.3.1 Isobars An isobar is a line of equal or constant pressure commonly used to analyze pressure patterns.
On a Surface Analysis Chart, isobars are solid lines usually spaced at intervals of 4 millibars (mb). Each isobar is labeled. For example, 1032 signifies 1032.0 mb and 992 signify 992.0 mb.
METAR/SPECI (Section 2.1) reports pressure in hectopascals. However, one millibar is equivalent to one hectopascal, so no conversion is required.
5.1.5.3.2 Pressure Systems On a Surface Analysis Chart, a High (H) is a maximum of atmospheric pressure while a Low (L) is a minimum of atmospheric pressure. Central pressure is the atmospheric pressure at the center of a High or Low -- the highest pressure in a High and the lowest pressure in a Low. The central pressure is denoted near each pressure center. Tropical storms, hurricanes, and typhoons (See Figure 5-21) are low-pressure systems with their names and central pressures denoted.
On a Surface Analysis Chart, a trough is an elongated area of relatively low atmospheric pressure, while a ridge is an elongated area of relatively high atmospheric pressure. Troughs are denoted by dashed lines and identified with the word TROF. Ridges are denoted by sawtoothed symbols. Ridges are rarely denoted on charts produced by the HPC.
5.1.5.3.3 Fronts The analysis shows positions and types of fronts by the symbols in Figure 5-21. The symbols on the front indicate the type of front and point in the direction toward which the front is moving.
Two short lines across a front indicate a change in front type.
Aviation Weather Services, Advisory Circular 00-45F, Revision 1
5.1.6 AAWU Surface Charts The Alaskan Aviation Weather Unit (AAWU) in Anchorage, Alaska is responsible for the state of Alaska. The surface analysis chart is located at:
http://aawu.arh.noaa.gov/surface.php
5.1.6.1 Issuance The AAWU issues Surface Analysis Charts 4 times daily for the state of Alaska. The valid times are shown in Table 5-5.
Table 5-5. AAWU Surface Analysis Issuance Schedule Valid Time 00 06 12 18 (UTC)
5.1.6.2 Analysis Symbols The symbols (Figure 5-22) used on the Alaskan Surface Analysis Chart are similar to those found on the HPC Surface Analysis chart. However, since the Alaskan Surface Analysis chart is in black and white all of the symbols are black and white as well.
A Key to Symbols used on the AAWU Graphic Products
- Cold Front H 1032 - High Pressure Center Pressure in millibars
- Warm Front L 988 - Low Pressure Center
- Occluded Front Pressure in millibars
- Stationary Front
- Occasional or greater
- Trough Precipitation
- Ridge
- Fog - Freezing Rain - Mixed Rain/Snow аю - Haze - Freezing Drizzle - Rain Showers
- Smoke - Light Icing - Snow Showers ‡→ - Drifting Snow - Moderate Icing - Rain/Snow Showers
- Sandstorm - Severe Icing K -Thunderstorm
• - Drizzle * - Snow A - Light Turbulence
• - Rain > - Ice Crystals A - Moderate Turbulence A - Ice Pellets A - Severe Turbulence Figure 5-22. AAWU Surface Analysis Chart Symbols AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-19
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-20
Figure 5-23. AAWU Alaskan Surface Chart Example
5.1.6.3 Station Plot Models Land, ship, buoy, and C-MAN stations are plotted on the chart to aid in analyzing and interpreting the surface weather features. These plotted observations are referred to as station models. Some stations may not be plotted due to space limitations. However, all reporting stations are used in the analysis.
Figures 5-24 and 5-25 show the most commonly used station plot models used in surface analysis charts.
Figure 5-24. AAWU Surface Analysis Chart Station Plot Model
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-21
Figure 5-25. AAWU Surface Analysis Chart Ship/buoy Plot Model
5.1.6.3.1 Station Identifier The format of the station identifier depends on the observing platform.
Ship -- Typically 4 or 5 characters. If 5 characters, then the fifth will usually be a digit.
Buoy -- Whether drifting or stationary, a buoy will have a 5-digit identifier. The first digit will always be a 4.
C-MAN -- Stands for Coastal-Marine Automated Network, and are usually close to coastal areas. Their identifier will appear like a 5-character ship identifier, however the 4th character will identify off which state the platform is located.
Land -- Land stations will always be 3 characters, making them easily distinguishable from ship, buoy, and C-MAN observations.
5.1.6.3.2 Temperature Air temperature is plotted in whole degrees Celsius on large-scale charts. Hourly surface charts may have temperatures using whole degrees Fahrenheit.
5.1.6.3.3 Dew Point Dew point temperature is plotted in whole degrees Celsius on large-scale charts. Hourly surface charts may have dew point temperatures using whole degrees Fahrenheit.
5.1.6.3.4 Wind Wind is plotted in increments of 5 knots (kts). The wind direction is in “true” degrees and is depicted by a stem (line) pointed in the direction from which the wind is blowing. Wind speed is determined by adding the values of the flags (50 kts), barbs (10kts), and half barbs (5 kts) found on the stem.
A single circle over the station with no wind symbol indicates a calm wind.
Figure 5-26 shows some sample wind symbols.
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-22
Figure 5-26: AAWU Surface Analysis Chart Wind Plotting Model
5.1.6.3.5 Ceiling Ceiling is plotted in hundreds of feet above ground level.
5.1.6.3.6 Visibility Surface visibility is plotted in whole statute miles.
5.1.6.3.7 Pressure Sea-level pressure is plotted in tenths of millibars (mb), with the first two digits omitted (generally a 10 or 9). For reference, 1013 mb is equivalent to 29.92 inches of mercury. Below are some sample conversions between plotted and complete sea-level pressure values:
410: 1041.0 mb 103: 1010.3 mb 987: 998.7 mb 872: 987.2 mb
5.1.6.3.8 Pressure Trend The pressure trend has two components, a number and symbol, to indicate how the sea-level pressure has changed during the past three hours. The number provides the 3-hour change in tenths of millibars, while the symbol provides a graphic illustration of how this change occurred.
Figure 5-27 shows the meanings of the pressure trend symbols.