AC 00-45F

Change 1Historical

Advisory circular · Aviation Weather Services

Approved
July 1, 2008
Last reviewed
September 13, 2024
This change
This entire document series, all through the H Revision, is canceled.
Cancels
AC00-45F
Cancelled by
AC00-45F CHG 2
Family
AC 00-45 · 10 versions
Revision
F, change 1
14 CFR parts
1

Guidance, not mandatory unless a rule or AD requires it. DRS record last changed November 21, 2025.

Show pages 154–165
Page 166Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-56

5.8 Alaska Initial Geopotential Heights and Winds Charts The Alaska Initial Geopotential Heights and Winds Charts (Figure 5-54) display an analysis of the observed height contours and winds at selected constant pressure surfaces (flight levels).

Figure 5-50. Alaskan Initial Geopotential Heights and Winds Chart Example

Table 5-24. Pressure Altitudes of Alaska Initial Geopotential Heights and Winds Charts

CHART PRESSURE ALTITUDE (Feet, MSL)

PRESSURE ALTITUDE (Meters, MSL) 200 MB 39,000 ft 12,000 m 300 MB 30,000 ft 9,000 m 500 MB 18,000 ft 5,500 m 700 MB 10,000 ft 3,000 m 850 MB 5,000 ft 1,500 m

5.8.1 Issuance The charts are issued twice daily with valid times of 00z and 12z and can be found on the Alaska Aviation Weather Unit (AAWU) web site at: http://aawu.arh.noaa.gov/upperwinds.php.

Page 167Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-57

5.8.2 Analysis The analysis of both height contours and winds are based on output from the North American Mesoscale (NAM) computer forecast model.

5.8.2.1 Height Contours Height contours are lines of constant height referenced to MSL and are used to map the height variations of constant pressure surfaces. They identify and characterize pressure systems on constant pressure charts.

Contours are drawn as solid lines and labeled in meters. The intervals at which the contours are drawn are 60 meters on all of the charts.

5.8.2.2 Winds Wind is plotted in increments of 5 knots (kts). The wind direction is referenced to “true” north and is depicted by a stem (line) pointed in the direction from which the wind is blowing. Wind speed is determined by adding the values of the flags (50 kts), barbs (10kts), and half barbs (5 kts) found on the stem.

A single circle over the station with no wind symbol indicates a calm wind.

Figure 5-55 contains some examples wind symbols.

Figure 5-51. Alaskan Initial Geopotential Heights and Winds Chart Wind Plotting Model

5.8.3 Use The Alaska Initial Geopotential Heights and Winds Charts are used to provide an overview of heights, pressure patterns and winds at specified pressure altitudes. Pressure patterns cause

Page 168Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-58 and characterize much of the weather. Typically, lows and troughs are associated with bad weather, clouds and precipitation, while highs and ridges are associated with good weather.

Page 169OCROpen in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 Jeather Unit He 4f 11580

AL AL AL 200MB WINDS AND CONTOURS VALID 12Z 5/4/2005 a 100 11760~ - 140 Figure 5-52. Alaskan Initial Geopotential Heights and Winds Chart - 200MB Winds and Contours Chart Example JAI | 412: 41 Alaska Aviation 118:

4I!

- 175 8820- 300HB WINDS AND CONTOURS VALID 122 5/4/2005 Figure 5-53. Alaskan Initial Geopotential Heights and Winds Chart - 300MB Winds and Contours Chart Example AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-59

Page 170OCROpen in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 W04 111 5280 weather Unit -1Ý5 500MB WINDS AND CONTOURS VALID 122 5/4/2005 5580 140 % Figure 5-54. Alaskan Initial Geopotential Heights and Winds Chart - 500MB Winds and Contours Chart Example

- 2820_ eather Wit 3000

- 1752760. 700MB WINDS AND CONTOURS VALID 12Z 5/4/2005 -140 - 135 130 Figure 5-55. Alaskan Initial Geopotential Heights and Winds Chart - 700MB Winds and Contours Chart Example AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-60

Page 171Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 5: Graphical Observations and Derived Products Page 5-61

Figure 5-56. Alaskan Initial Geopotential Heights and Winds Chart - 850MB Winds and Contours Chart Example

Page 172Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 6: Products for Aviation Hazards Page 6-1 6 PRODUCTS FOR AVIATION HAZARDS

6.1 Significant Meteorological Information (SIGMET) A SIGMET is a concise description of the occurrence or expected occurrence of specified en route weather phenomena which may affect the safety of aircraft operations. SIGMETs are intended for dissemination to all pilots in flight to enhance safety. SIGMETs are issued by the responsible MWO as soon as practical to give notice to operators and aircrews of potentially hazardous en-route conditions.

SIGMETs are available on the Aviation Digital Data Service (ADDS) web site at:

http://adds.aviationweather.noaa.gov/airmet/

o Alaska SIGMETs are also available on the Alaska Aviation Weather Unit (AAWU) web site at: http://aawu.arh.noaa.gov/

o Hawaii SIGMETs are also available on the NWS WFO Honolulu web site at:

http://www.prh.noaa.gov/hnl/pages/aviation.php

6.1.1 SIGMET Issuance SIGMETs are issued from Meteorological Watch Offices (MWO). The U.S. has three MWOs:

the Aviation Weather Center (AWC), the Alaska Aviation Weather Unit (AAWU), and the Weather Forecast Office (WFO) in Honolulu. Their areas of responsibility are as follows:

The AWC:

o Twenty (20) domestic Air Route Traffic Control Center (ARTCC) Flight Information Regions (FIRs) covering the conterminous U.S. (CONUS) and adjacent coastal waters (CONUS) (Figure 6-1).

o The New York, Houston, Miami, and San Juan Oceanic FIRs (Figure 6-2).

o The Oakland Oceanic FIR north of 30 north latitude, and the portion east of 140 west longitude which is between the equator and 30 north latitude (Figure 6-3).

The AAWU is responsible for the Anchorage Continental FIR and Anchorage Oceanic FIR (Figure 6-3).

WFO Honolulu is responsible for the Oakland Oceanic FIR south of 30 north latitude and between 140 west and 130 east longitude (Figure 6-3).

Page 173OCROpen in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 San Fráncisco Chicago Boston Salt Lake City Dallas/Fort Worth Miami Figure 6-1. AWC SIGMET Areas of Responsibility - Conterminous U.S.

NEW YORK OCEANIC FIR 130

HOUSTON MIAMIL

OCEANIC OCEANIC SIMIAMI FIR FIR OCEANIÇ NEIR SAN JUAN ı20

• FIR

- 90 - 80 şø60 -50 -40 Figure 6-2. AWC SIGMET Areas of Responsibility - Atlantic Basin AC 00-45F (July 2008) Section 6: Products for Aviation Hazards Page 6-2

Page 174Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 6: Products for Aviation Hazards Page 6-3

Figure 6-3. SIGMET Areas of Responsibility – Pacific Basin

6.1.1.1 SIGMET Identification When a SIGMET is issued, it is assigned a unique series identifier:

AWC for CONUS o NOVEMBER through YANKEE, excluding SIERRA and TANGO

AWC for Oakland Oceanic FIR o ALFA through HOTEL

Honolulu MWO for Oakland Oceanic FIR o NOVEMBER through ZULU

AAWU for Anchorage FIR o INDIA through MIKE

Page 175Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 6: Products for Aviation Hazards Page 6-4

A number is assigned sequentially with each issuance until the phenomenon ends. At 0000 UTC each day, all continuing SIGMETs are renumbered to one (1) regardless of a continuation of the phenomena. (e.g., YANKEE 1, YANKEE 2, YANKEE 3, etc.)

6.1.2 SIGMET Standardization SIGMETs follow these standards:

All heights or altitudes are referenced to above mean sea level (AMSL), unless otherwise noted, and annotated using the height in hundreds of feet, consisting of three digits (e.g., 040). For heights at or above 18,000 feet, the level is preceded by FL to represent flight levels (e.g., FL180).

References to latitude and longitude are in whole degrees and minutes following the model: Nnn[nn] or Snn[nn], Wnnn[nn] or Ennn[nn] with a space between latitude and longitude and a hyphen between successive points. Example: N3106 W07118 – N3011 W7209

Messages are prepared in abbreviated plain language using contractions from the Federal Aviation Administration (FAA) Order 7340.1Z for domestic products and International Civil Aviation Organization (ICAO) document 8400 for international products issued for Oceanic FIRs. A limited number of non-abbreviated words, geographical names and numerical values of a self-explanatory nature may also be used.

Weather and obstructions to visibility are described using the weather abbreviations for surface weather observations (METAR/SPECI). See the Federal Meteorological Handbook (FMH) No. 1 – Surface Observations or Section 3.1 of this document.

Heights are identified as follows:

o For heights below 3,000 feet, increments are in 100’s of feet o For heights from 3,000 to 5,000 feet, increments are in 500’s of feet o For heights greater than 5,000 feet, increments are in 1,000’s of feet

6.1.3 SIGMET (Non-Convective) – Conterminous U.S.

6.1.3.1 SIGMET (Non-Convective) Issuance Criteria – Contiguous U.S.

A SIGMET may be issued in the Contiguous U.S. when any of the following conditions are affecting or, in the judgment of the forecaster, are expected to affect an area of at least 3,000 square miles or an area judged to have a significant impact on the safety of aircraft operations.

Severe or greater Turbulence (SEV TURB)

Severe Icing (SEV ICE)

Widespread Duststorm (WDSPR DS)

Widespread Sandstorm (WDSPR SS)

Page 176Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 6: Products for Aviation Hazards Page 6-5 Volcanic Ash (VA)

6.1.3.2 SIGMET (Non-Convective) Issuance Time and Valid Period – Conterminous U.S.

A SIGMET is an unscheduled product issued any time conditions reaching SIGMET criteria are occurring or expected to occur within a 4-hour period. A SIGMET can have a valid period up to, but not exceeding, four (4) hours. SIGMETs for continuing phenomena will be reissued at least every 4 hours as long as SIGMET conditions continue to occur in the area for responsibility.

6.1.3.3 SIGMET (Non-Convective) Format – Conterminous U.S.

The content and order of elements in the SIGMET are as follows:

series name and number

valid beginning and ending time (UTC)

list of states affected by the phenomena

location of phenomena delineated by high-altitude VOR coordinates covering the affected area during the SIGMET valid time

phenomena description (e.g., SEV ICE)

vertical extent (base and top), if appropriate

movement, if appropriate

intensity change (INTSF – intensifying, WKN – weakening, NC – no change)

Indication that the whether the condition will continue during the 4 hours beyond the valid time of the SIGMET

Page 177Open in PDF

Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 6: Products for Aviation Hazards Page 6-6

Figure 6-4. SIGMET for the Conterminous U.S. Decoding Example

Table 6-1. Decoding a SIGMET (Non-Convective) for the Conterminous U.S.

Line Content Description 1 SFO SIGMET area identifier R SIGMET series WS Product identifier 100130 Issuance date/time UTC 2 SIGMET Product type ROMEO SIGMET series name 1 Series issuance number VALID UNTIL 100530 Ending valid date/time UTC 3 OR WA Phenomenon location (states) 4 FROM SEA TO PDT TO EUG TO SEA Phenomenon location (highaltitude VOR coordinates) 5 OCNL MOGR CAT BTN FL280 AND FL350 EXP DUE TO JTSTR. CONDS BGNG AFT 0200Z CONTG BYD 0530Z AND SPRDG OVR CNTRL ID BY 0400Z.

Phenomenon description

The SIGMET in Figure 6-4 is decoded as the following:

(Line 1) SIGMET ROMEO series issued for the San Francisco Area at 0130 UTC on the 10th day of the month.

(Line 2) This is the first issuance of the SIGMET ROMEO series and is valid until the 10th day of the month at 0530 UTC.

(Line 3) The affected states within the SFO area are Oregon and Washington.

(Line 4) From Seattle, WA; to Pendleton, OR; to Eugene, OR; to Seattle, WA;