Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-11
Figure 9-11. NCWF Previous Performance Polygons Example
9.2.3 The ADDS and AWC JAVA display The ADDS web site allows for the display of all previously discussed attributes of the NCWF.
This site also allows many overlay options including METARs, TAFs, VORs, ARTCC boundaries, counties, highways and rivers. Product animation is also possible on the AWC JavaScript image.
9.2.4 Strengths and Limitations Strengths of the NCWF include:
Convective hazard fields that agree very well with radar and lightning data,
Updated every five minutes,
High-resolution forecasts of convective hazards, and
Long-lived convective precipitation is well forecast.
Limitations of the NCWF include:
Initiation, growth, and decay of convective precipitation are not forecast,
Short-lived or embedded convection may not be accurately displayed or forecast,
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-12
Low-topped convection that contains little or no lightning may not be depicted,
Erroneous motion vectors are occasionally assigned to storms, and
Convective hazard field scales are not identified within the forecast polygons.
9.2.5 Uses of the NCWF The purpose of the National Convective Weather Forecast (NCWF) is to produce a convective hazard field diagnostic and forecast product based on radar data, echo top mosaics, and lightning data. The target audience includes the FAA and other government agencies, pilots, airline dispatchers, aviation meteorologists, and other interested aviation users in the general public. The NCWF is a supplement to, but does not substitute for, the report and forecast information contained in Convective SIGMETs.
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-13
9.3 Current Icing Product (CIP) The Current Icing Product (CIP) product combines sensor and numerical data to provide a hourly three-dimensional diagnosis of the icing environment. This information is displayed on a suite of twelve graphics which are available for the 48 contiguous United States, much of Canada and Mexico, and their respective coastal waters.
The CIP product suite is automatically produced with no human modifications. Information on the graphics is determined from observational data including WSR-88D radar, satellite, pilot weather reports, surface weather reports, lightning and computer model output.
FAA policy states the CIP is a supplementary weather product for enhanced situational awareness only and must be used with one or more primary products such as an AIRMET or SIGMET (see AIM 7-1-3).
9.3.1 Issuance The CIP product suite is issued hourly 15 minutes after the hour by the Aviation Weather Center (AWC). The products are available through the Aviation Digital Data Service (ADDS) web site at: http://adds.aviationweather.noaa.gov/icing/icing_nav.php.
.
9.3.2 Content The CIP product suite consists of 10 graphics including:
Icing Probability,
Icing Probability Maximum (Max),
Icing Severity,
Icing Severity Max,
Icing Severity – Probability > 25%,
Icing Severity – Probability > 25% Max,
Icing Severity – Probability > 50%,
Icing Severity – Probability > 50% Max,
Icing Severity plus Supercooled Large Droplets (SLD), and
Icing Severity plus Supercooled Large Droplets (SLD) Max.
The CIP products are generated for individual altitudes from 1,000 feet MSL to Flight Level (FL) 300 at intervals of 1,000 feet.
The CIP Max products are a composite product which displays information about icing at all altitudes from 1,000 feet MSL to FL300. Single altitudes are referenced to MSL from the 1,000
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 to 17,000 feet and Flight Levels above 17,000 feet. The ADDS web site allows for access to every other altitude (1,000 FT, 3,000 FT, 5,000 FT, etc...). However, all altitudes can be accessed by use of the Flight Path Tool on the ADDS site.
Icing PIREPs are plotted on a single altitude graphic if the PIREP is within 1,000 feet of the selected altitude and has been observed within 75 minutes of the chart's valid time. On the CIP Max graphics, PIREPs for all altitudes (i.e. 1,000 feet MSL to FL300) are displayed. However, negative reports of icing are not plotted on the CIP Max products in an effort to reduce clutter.
The PIREP legend is located on the bottom of each graphic.
9.3.2.1 Icing Probability The Icing Probability product (Figure 9-12) displays, at a single altitude, the probability of icing.
Probabilities range from 0% (no icing expected) to 85% or greater (nearly certain icing.)
By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7—1—3).
Probability of icing at 3000 ft. MSL Analysis valid 1500 UTC Mon 27 Nov 2006 terrain 5 25 35 45 55 65 75 g Negative 1) Trace-Light \ Light-Maderate 'I Maderate-Severa (percent) Icing PIREP Symbals (J Trace Ll Light ' Moderate I Savare Figure 9-12. CIP Icing Probability (3,000 feet MSL) Example AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-14
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 "Cool" colors represent low probabilities and "warm" colors represent higher probabilities.
Probabilities do not reach 100% because the data used to determine the probability of icing cannot diagnose, with absolute certainty, the presence of icing conditions at any location and altitude. White regions indicate that the probability of icing is zero. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic.
9.3.2.2 Icing Probability -- Maximum The Icing Probability - Maximum graphic (Figure 9-13) displays the probability of icing at all altitudes from 1,000 feet MSL to FL300. Probabilities range from 0% (no icing expected) to 85% or greater (nearly certain icing.)
dy FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used mith one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3).
Maximum icing probability (1000 ft. MSL to FL300) Analysis valid 1600 UTC Mon 27 Nov 2006 25 45 65 75 I Trace-Light Vp Light-Moderate _I Moderate-Savera (percent) cing PIREP Symbals W Trace Ly Light ly/ Maderate Lyl Severe Figure 9-13. CIP Icing Probability - Max Example "Cool" colors represent low probabilities and "warm" colors represent higher probabilities.
Probabilities do not reach 100% because the data used to determine the probability of icing AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-15
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 cannot diagnose, with absolute certainty, the presence of icing conditions at any location and altitude. White regions indicate the probability of icing is zero.
9.3.2.3 Icing Severity The Icing Severity product (Figure 9-14) depicts, at a single altitude, the intensity of icing expected at locations where the Icing Probability product depicts possible icing. Icing intensity is displayed using standard icing intensity categories: trace, light, moderate and heavy.
By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3).
Icing severity at 3000 it. MSL Analysis valid 1500 UTC Mon 27 Nov 2006 terrain None Trace Light Moderate Heavy g Negative 4J Trace-Light W Light-Maderate 1| Moderate-Savare Icing PIREP Symbals W Trace Ly) Light / Noderate Ly severe Figure 9-14. CIP Icing Severity (3,000 feet MSL) Example The lightest blue color represents trace icing. As the blue-color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic.
AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-16
Aviation Weather Services, Advisory Circular 00-45F, Revision 1
9.3.2.4 Icing Severity -- Maximum The Icing Severity - Maximum product (Figure 9-15) displays the intensity of icing at all altitudes from 1,000 feet MSL to FL300. Icing intensity is displayed using standard icing intensity categories: trace, light, moderate and heavy.
By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7—1-3).
Maximum icing severity (1000 ft. MSL to FL300) Analysis valid 1600 UTC Mon 27 Nov 2006 None Trace Light Moderate Heavy 1]] Trace-Light V Light-Moderate _I Moderate-Savare Icing PIREP Symbale W Trace Ly Light H' Mederate severe Figure 9-15. CIP Icing Severity - Max Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary.
9.3.2.5 cing Severity - Probability > 25% The Icing Severity - Probability > 25% product (Figure 9-16) depicts, at a single altitude, where a 26 to 100 percent probability exists for the indicated icing intensity. Icing intensity is displayed using standard icing intensity categories: trace, light, moderate and heavy.
AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-17
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 ly FAA policy CIP is a Supplementary Meather Product tor enhanced situational awareness only and must b ised with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3) Icing severity (prob>25%) at 3000 ft. MSL Analysis valid 1500 UTC Mon 27 Nov 2006 terrain None <25% Trace Light Moderate Hedyy ø Negative 4J Trace-Light W) Light-Moderate I Moderate-Savare Icing PIREP Symbols W Trace Ly Light Y/ Severa Figure 9-16. CIP Icing Severity Probability >25% Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate higher-elevation terrain extending above the altitude of the particular graphic. A gray color is used to mask the intensity pixels where the probability of icing is 25% or less.
9.3.2.6 Icing Severity - Probability > 25% - Maximum The Icing Severity - Probability > 25% - Maximum product (Figure 9-17) depicts, at all altitudes from 1,000 feet MSL to FL300, where the probability of the indicated icing intensity is 26 to 100 percent. Icing intensity is displayed using standard icing intensity categories: trace, light, moderate, heavy.
AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-18
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7—1-3).
Maximum icing severity (prob>25%) (1000 ft. MSL to FL300) Analysis valid 1700 UTC Mon 27 Nov 2006 None <25% Trace Light Moderate Heavy
4) Trace-Light WiLight-Moderate 1) Moderate-Savare Icing PIREP Symbols W Traca Ll Light ' Moderate Yul Severa Figure 9-17. CIP Icing Severity Probability >25% Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. A gray color is used to mask the intensity pixels where the probability of icing is 25% or less.
9.3.2.7 Icing Severity - Probability > 50% The Icing Severity - Probability > 50% product (Figure 9-18) depicts, at a single altitude, where the probability of the indicated icing intensity 51 to 100 percent. Icing intensity is displayed using standard icing intensity categories: trace, light, moderate and heavy.
AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-19
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3).
Icing severity (prob>50%) at 3000 ft. MSL Analysis valid 1500 UTC Mon 27 Nov 2006 terrain None <50% Trace Light Moderate Heavy ga Negative LJ Trace-Light W Light-Moderate | Moderate-Severe Icing PIREP Symbals W Trace Le Light HI Madsrate If Savara Figure 9-18. CIP Icing Severity Probability > 50% Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic. A gray color is used to mask the intensity pixels where the probability of icing is 50% or less.
9.3.2.8 Icing Severity - Probability > 50% - Maximum The Icing Severity - Probability > 50% - Maximum product (Figure 9-19) depicts, at all altitudes from 1,000 feet MSL to FL300, where the probability of the indicated icing intensity is 51 to 100 percent. Icing intensity is displayed using standard icing intensity categories: trace, light, moderate and heavy.
AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-20
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 By FAA policy CIP is a Supplementary Meather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3).
Maximum icing severity (prob>50%) (1000 fl. MSL to FL300) Analysis valid 1700 UTC Mon 27 Nov 2006 None <50% Trace Light Moderate Heavy Wi Trace-Light N Light-Moderate I Moderate-Savara leing PIREP Symbols W Trace Yu Light 4) Moderate I Severa Figure 9-19. CIP Icing Severity Probability > 50% - Max Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. A gray color is used to mask the intensity pixels where the probability of icing is 50% or less.
9.3.2.9 Icing Severity plus Supercooled Large Droplets (SLD) The Icing Severity plus Supercooled Large Droplets (SLD) product (Figure 9-20) depicts, at a single altitude, the intensity of icing expected as well as locations where a threat for SLD exists.
SLD is defined as supercooled water droplets larger than 50 micrometers in diameter. These size droplets include freezing drizzle and/or freezing rain aloft. SLD, which are outside the icing AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-21
Aviation Weather Services, Advisory Circular 00-45F, Revision 1 certification envelopes (FAR Part 25 Appendix C), can be particularly hazardous to some aircraft.
Icing intensity is displayed using standard icing intensity categories: trace, light, moderate and heavy.
ly FAR policy LIP is a Supplementary neather Product tor enhanced situational avareness only and must bi ised with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AM 7-1-3) Icing severity at 3000 ft. MSL Analysis valid 1800 UTC Mon 27 Nov 2006 SLD threat terrain None Trace Light Moderate Heavy ø Negative LJ Trace-Light / Light-Moderate I Maderate-Savare cing PIREP Symbals W Trace Let Light If Moderate Kyl severe Figure 9-20. CIP Icing Severity plus Supercooled Large Droplets (SLD) Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic.
Locations where a threat for SLD exists are depicted with red hatching.
AC 00-45F (July 2008) Section 9: Supplementary Products Page 9-22