Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) Section 9: Supplementary Products Page 9-13
9.3 Current Icing Product (CIP) The Current Icing Product (CIP) product combines sensor and numerical data to provide a hourly three-dimensional diagnosis of the icing environment. This information is displayed on a suite of twelve graphics which are available for the 48 contiguous United States, much of Canada and Mexico, and their respective coastal waters.
The CIP product suite is automatically produced with no human modifications. Information on the graphics is determined from observational data including WSR-88D radar, satellite, pilot weather reports, surface weather reports, lightning and computer model output.
FAA policy states the CIP is a supplementary weather product for enhanced situational awareness only and must be used with one or more primary products such as an AIRMET or SIGMET (see AIM 7-1-3).
9.3.1 Issuance The CIP product suite is issued hourly 15 minutes after the hour by the Aviation Weather Center (AWC). The products are available through the Aviation Digital Data Service (ADDS) web site at: http://adds.aviationweather.noaa.gov/icing/icing_nav.php.
.
9.3.2 Content The CIP product suite consists of 10 graphics including:
Icing Probability,
Icing Probability Maximum (Max),
Icing Severity,
Icing Severity Max,
Icing Severity – Probability > 25%,
Icing Severity – Probability > 25% Max,
Icing Severity – Probability > 50%,
Icing Severity – Probability > 50% Max,
Icing Severity plus Supercooled Large Droplets (SLD), and
Icing Severity plus Supercooled Large Droplets (SLD) Max.
The CIP products are generated for individual altitudes from 1,000 feet MSL to Flight Level (FL) 300 at intervals of 1,000 feet.
The CIP Max products are a composite product which displays information about icing at all altitudes from 1,000 feet MSL to FL300. Single altitudes are referenced to MSL from the 1,000
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) to 17,000 feet and Flight Levels above 17,000 feet. The ADDS web site allows for access to every other altitude (1,000 FT, 3,000 FT, 5,000 FT, etc...). However, all altitudes can be accessed by use of the Flight Path Tool on the ADDS site.
Icing PIREPs are plotted on a single altitude graphic if the PIREP is within 1,000 feet of the selected altitude and has been observed within 75 minutes of the chart's valid time. On the CIP Max graphics, PIREPs for all altitudes (i.e. 1,000 feet MSL to FL300) are displayed. However, negative reports of icing are not plotted on the CIP Max products in an effort to reduce clutter.
The PIREP legend is located on the bottom of each graphic.
9.3.2.1 Icing Probability The Icing Probability product (Figure 9-12) displays, at a single altitude, the probability of icing.
Probabilities range from 0% (no icing expected) to 85% or greater (nearly certain icing.)
By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3).
Probability of icing at 3000 ft. MSL Analysis valid 1500 UTC Mon 27 Nov 2006 terrain 25 35 45 55 65 75 R Negative 4f) Trace-Light W Light-Moderate I Moderate-Savare (percent) Icing PIREP Symbols I Trace Lul Light W/ Moderate WHy Sevare Figure 9-12. CIP Icing Probability (3,000 feet MSL) Example Page 9-14 Section 9: Supplementary Products
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) "Cool" colors represent low probabilities and "warm" colors represent higher probabilities.
Probabilities do not reach 100% because the data used to determine the probability of icing cannot diagnose, with absolute certainty, the presence of icing conditions at any location and altitude. White regions indicate that the probability of icing is zero. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic.
9.3.2.2 Icing Probability -- Maximum The Icing Probability - Maximum graphic (Figure 9-13) displays the probability of icing at all altitudes from 1,000 feet MSL to FL300. Probabilities range from 0% (no icing expected) to 85% or greater (nearly certain icing.)
dy FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3) Maximum icing probability (1000 ft. MSL to FL300) Analysis valid 1600 UTC Mon 27 Nov 2006 15 25 55 65 75 W/ Trace-Light W Light-Maderate I Moderate-Savara (percent) Icing PIREP Symbols W Trace L Light 'Moderate y/ Severe Figure 9-13. CIP Icing Probability - Max Example "Cool" colors represent low probabilities and "warm" colors represent higher probabilities.
Probabilities do not reach 100% because the data used to determine the probability of icing Section 9: Supplementary Products Page 9-15
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) cannot diagnose, with absolute certainty, the presence of icing conditions at any location and altitude. White regions indicate the probability of icing is zero.
9.3.2.3 Icing Severity The Icing Severity product (Figure 9-14) depicts, at a single altitude, the intensity of icing expected at locations where the Icing Probability product depicts possible icing. Icing intensity is displayed using icing intensity categories: trace, light, moderate and heavy.
By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3).
Icing severity at 3000 It. MSL Analysis valid 1500 UTC Mon 27 Nov 2006 terrain None Trace Light Moderate Heavy g Negative L) Trace-Light Ny Light-Maderate I Moderate-Savare Icing PIREP Symbals L Trace Ly) Light / Naderate If Savare Figure 9-14. CIP Icing Severity (3,000 feet MSL) Example The lightest blue color represents trace icing. As the blue-color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic.
Page 9-16 Section 9: Supplementary Products
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010)
9.3.2.4 Icing Severity -- Maximum The Icing Severity - Maximum product (Figure 9-15) displays the intensity of icing at all altitudes from 1,000 feet MSL to FL300. Icing intensity is displayed using icing intensity categories:
trace, light, moderate and heavy.
By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7—1-3).
Maximum icing severity (1000 ft. MSL to FL300) Analysis valid 1600 UTC Mon 27 Nov 2006 None Trace Light Moderate Heavy U) Trace-Light \ Light-Moderate I Moderate-Savare Icing PIREP Symbals W Trace Ll Light * Moderate I Severe Figure 9-15. CIP Icing Severity - Max Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary.
9.3.2.5 Icing Severity - Probability > 25% The Icing Severity - Probability > 25% product (Figure 9-16) depicts, at a single altitude, where a 26 to 100 percent probability exists for the indicated icing intensity. Icing intensity is displayed using icing intensity categories: trace, light, moderate and heavy.
Section 9: Supplementary Products Page 9-17
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) Page 9-18 Section 9: Supplementary Products
Figure 9-16. CIP Icing Severity Probability >25% Example
The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate higher-elevation terrain extending above the altitude of the particular graphic. A gray color is used to mask the intensity pixels where the probability of icing is 25% or less.
9.3.2.6 Icing Severity – Probability > 25% - Maximum The Icing Severity – Probability > 25% - Maximum product (Figure 9-17) depicts, at all altitudes from 1,000 feet MSL to FL300, where the probability of the indicated icing intensity is 26 to 100 percent. Icing intensity is displayed using icing intensity categories: trace, light, moderate, heavy.
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7—1—3).
Maximum icing severity (prob>25%) (1000 ft. MSL to FL300) Analysis valid 1700 UTC Mon 27 Nov 2006 None <25⅞ Trace Light Moderate Hedyy
4) Trace-Light V Light-Moderate 1) Moderdte-Savare Icing PIREP Symbols W Trace 4) Light H' Moderate Yul Severa Figure 9-17. CIP Icing Severity Probability >25% Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. A gray color is used to mask the intensity pixels where the probability of icing is 25% or less.
9.3.2.7 Icing Severity - Probability > 50% The Icing Severity - Probability > 50% product (Figure 9-18) depicts, at a single altitude, where the probability of the indicated icing intensity 51 to 100 percent. Icing intensity is displayed using icing intensity categories: trace, light, moderate and heavy.
Section 9: Supplementary Products Page 9-19
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) By FAA policy CIP is a Supplementary Weather Product for enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7—1-3).
Icing severity (prob>50%) at 3000 ft. MSL Analysis valid 1500 UTC Mon 27 Nov 2006 terrain None <50% Trace Light Moderate Heavy @ Negative 4J Trace-Light I Light-Moderate 1I Moderate-Savare Icing PIREP Symbols W Trace Al Light Y Severe Figure 9-18. CIP Icing Severity Probability > 50% Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic. A gray color is used to mask the intensity pixels where the probability of icing is 50% or less.
9.3.2.8 Icing Severity - Probability > 50% - Maximum The Icing Severity - Probability > 50% - Maximum product (Figure 9-19) depicts, at all altitudes from 1,000 feet MSL to FL300, where the probability of the indicated icing intensity is 51 to 100 percent. Icing intensity is displayed using icing intensity categories: trace, light, moderate and heavy.
Page 9-20 Section 9: Supplementary Products
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) dy FAR policy LIP is a supplementary heather Product tor enhanced situational awareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3).
Maximum icing severity (prob>50%) (1000 fl. MSL to FL300) Analysis valid 1700 UTC Mon 27 Nov 2006 None <50% Trace Light Moderate Heavy Ul Trace-Light Nu Light-Moderate I Moderate-Severa Icing PIREP Symbals Lf Trace YuLight /Moderate Yul Severe Figure 9-19. CIP Icing Severity Probability > 50% - Max Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. A gray color is used to mask the intensity pixels where the probability of icing is 50% or less.
9.3.2.9 Icing Severity plus Supercooled Large Droplets (SLD) The Icing Severity plus Supercooled Large Droplets (SLD) product (Figure 9-20) depicts, at a single altitude, the intensity of icing expected as well as locations where a threat for SLD exists.
SLD is defined as supercooled water droplets larger than 50 micrometers in diameter. These size droplets include freezing drizzle and/or freezing rain aloft. SLD, which are outside the icing Section 9: Supplementary Products Page 9-21
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) certification envelopes (FAR Part 25 Appendix C), can be particularly hazardous to some aircraft.
Icing intensity is displayed using icing intensity categories: trace, light, moderate and heavy.
By FAA policy CIP is a Supplementary Weather Product for enhanced situational avareness only and must be used with one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7—1—3).
Icing severity at 3000 ft. MSL Analysis valid 1800 UTC Mon 27 Nov 2006 SLD threat terrain None Trace Light Moderate Heavy ø Negative If Trace-Light W| Light-Moderate W! Maderate-Savare cing PIREP Symbols W Trace Ll Light If Moderate H/ Severa Figure 9-20. CIP Icing Severity plus Supercooled Large Droplets (SLD) Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate where no probability of icing exists and, therefore, no intensity is necessary. Brown regions indicate where higher-elevation terrain extends above the altitude of the particular graphic.
Locations where a threat for SLD exists are depicted with red hatching.
9.3.2.10 Icing Severity plus Supercooled Large Droplets (SLD) - Maximum Page 9-22 Section 9: Supplementary Products
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) The Icing Severity plus Supercooled Large Droplets (SLD) product (Figure 9-21) depicts at all altitudes, between 1,000 feet MSL and FL300, the intensity of icing expected as well as locations where a threat for SLD exists.
SLD is defined as supercooled water droplets larger than 50 micrometers in diameter. These size droplets include freezing drizzle and/or freezing rain aloft. SLD, which are outside the icing certification envelopes (FAR Part 25 Appendix C), can be particularly hazardous to some aircraft.
ly FAA policy CIP is a Supplementary Meather Product for enhanced situational awareness only and must bi sed mith one or more primary products (safety decision) such as an AIRMET or SIGMET (see AIM 7-1-3) Maximum icing severity (1000 ft. MSL to FL300) Analysis valid 1500 UTC Mon 27 Nov 2006 SLD threat None Trace Light Moderate Heavy
4) Trace-Light W Light-Maderate \ Moderate-Savare cing PIREP Symbols W Trace Yes Light y Moderate # Severe Figure 9-21. CIP Icing Severity plus Supercooled Large Droplets (SLD) - Max Example The lightest blue color represents trace icing. As the blue color shades become darker, the icing intensity increases. The darkest blue color represents heavy icing. White regions indicate Section 9: Supplementary Products Page 9-23
Aviation Weather Services, Advisory Circular 00-45G, Change 1 (July 2010) Page 9-24 Section 9: Supplementary Products where no probability of icing exists and, therefore, no intensity is necessary. Locations where a threat for SLD exists are depicted with red hatching.
9.3.3 Strengths and Limitations
9.3.3.1 Strengths The CIP product suite is updated hourly and provides a diagnostic tool to assist in determining the probability for icing, the intensity of icing and the threat for SLD.
9.3.3.2 Limitations Actual icing severity may be different than what is depicted on the CIP graphics and plotted PIREPS because:
Different aircraft types experience different severities of icing in the same atmospheric environments. Severity definitions are currently pilot-based and thus are a function of the aircraft type, flight phase (takeoff/landing, cruise, etc.), aircraft configuration, as well as the pilot’s experience and perception of the icing hazard.
Assessing the amount and drop size of supercooled liquid water (SLW) in the atmosphere is difficult.
The Icing Severity products depict the severity of the meteorological icing environment and not the resultant icing that may occur on the aircraft.
9.3.4 Uses The CIP Icing Probability product can be used to identify the current three-dimensional probability of icing.
The CIP Icing Severity product can be used to determine the intensity of icing. The CIP Icing Severity – Probability > 25% or Probability > 50% depicts the probability of a given intensity of icing occurring.
Finally the Icing Severity plus SLD product can help in determining the threat of SLD which is particularly hazardous to some aircraft.
Icing PIREPs are plotted on single altitude graphics if the PIREP is within 1,000 feet of the graphic’s altitude and has been observed within 75 minutes of the chart’s valid time. On CIP Max product, PIREPs for all altitudes (i.e. 1,000 feet MSL to FL300) are displayed. However, negative reports of icing are not plotted on the CIP Max product in an effort to reduce clutter.
The PIREP legend is located on the bottom of each graphic.