11/14/16 Aviation Weather Services AC 00-45H 3-29
3.2.1.4 Altitude/Flight Level (/FL).
The altitude/flight level (/FL) is the altitude in hundreds of feet MSL where the phenomenon was first encountered. If not known, UNKN is entered. If the aircraft was climbing or descending, the appropriate contraction (DURC or DURD) is entered in the remarks (/RM). If the condition was encountered within a layer, the altitude range is entered within the appropriate element that describes the condition.
Examples:
/FL085 8,500 ft MSL /FL310 Flight level 310 /FLUNKN /RM DURC Flight level unknown, remarks, during climb
3.2.1.5 Aircraft Type (/TP).
Aircraft type (/TP) is entered. If not known, UNKN is entered. Icing and turbulence reports always include aircraft type.
Examples:
/TP BE20 Super King Air 200 /TP SR22 Cirrus 22 /TP P28R Piper Arrow /TP UNKN Type unknown
3.2.1.6 Sky Condition (/SK).
Sky condition (/SK) group is used to report height of cloud bases, tops, and cloud cover. The height of the base of a layer of clouds is coded in hundreds of feet MSL. The top of a layer is entered in hundreds of feet MSL preceded by the word TOP. If reported as clear above the highest cloud layer, SKC is coded following the reported level.
Examples:
/BKN040-TOP065 Base of broken layer 4,000 ft MSL, top 6,500 ft MSL /SK OVC100-TOP110/ SKC Base of an overcast layer 10,000 ft MSL, top 11,000 ft MSL, clear above /SK OVC015-TOP035/OVC230 Base of an overcast layer 1,500 ft MSL, top 3,500 ft MSL, base of an overcast layer 23,000 ft MSL /SK OVC-TOP085 Overcast layer, top 8,500 ft MSL
11/14/16 Aviation Weather Services AC 00-45H 3-30 Cloud cover amount ranges are entered with a hyphen separating the amounts,
e.g., BKN-OVC.
Examples:
/SK SCT-BKN050-TOP100 Base of a scattered to broken layer 5,000 ft MSL, top 10,000 ft MSL /SK BKN-OVCUNKN-TOP060/BKN120-TOP150/ SKC Base of a broken to overcast layer unknown, top 6,000 ft MSL, base of a broken layer 12,000 ft MSL, top 15,000 ft MSL, clear above Unknown heights are indicated by the contraction UNKN.
Examples:
/SK OVC065-TOPUNKN Base of an overcast layer 6,500 ft MSL, top unknown. If a pilot indicates he/she is in the clouds, IMC is entered.
/SK OVC065-TOPUNKN /RM IMC Base of an overcast layer 6,500 ft MSL, top unknown, remark, in the clouds. When more than one layer is reported, layers are separated by a solidus (/).
3.2.1.7 Flight Visibility and Weather (/WX).
The pilot reports the weather conditions he or she encounters as follows:
Flight visibility, when reported, is entered first in the /WX field. It is coded FV followed by a two-digit visibility value rounded down, if necessary, to the nearest whole statute mile and appended with SM (FV03SM). If visibility is reported as unrestricted, FV99SM is entered.
Flight weather types are entered using one or more of the surface weather reporting phenomena contained in Table 3-2.
Example:
/WX FV01SM +DS000-TOP083/SKC /RM DURC Flight visibility 1 sm, base heavy duststorm layer at the surface, top 8,300 ft MSL, clear above, remarks, during climb
11/14/16 Aviation Weather Services AC 00-45H 3-31 When more than one form of precipitation is combined in the report, the dominant type is reported first.
Examples:
/WX FV00SM +TSRAGR Flight visibility 0 sm, thunderstorm, heavy rain, hail /WX FV02SM BRHZ000-TOP083 Flight visibility 2 sm, base of a haze and mist layer at the surface, top 8,300 ft MSL If a funnel cloud is reported, it is coded FC following /WX group and is spelled out as Funnel Cloud after /RM group. If a tornado or waterspout is reported, it is coded +FC following /WX group and TORNADO or WATERSPOUT is spelled out after the /RM group.
Examples:
/WX FC /RM FUNNEL CLOUD Funnel cloud, remarks, funnel cloud /WX +FC /RM TORNADO Tornado, remarks, tornado When more than one type of weather is reported, they are reported in the following order:
• TORNADO, WATERSPOUT, or FUNNEL CLOUD.
• Thunderstorm with or without associated precipitation.
• Weather phenomena in order of decreasing predominance.
No more than three groups are used in a single PIREP.
Weather layers are entered with the base and/or top of the layer when reported. The same format as in the sky condition (/SK) group is used.
Example:
/WX FU002-TOP030 Base of a smoke layer, 200 ft MSL, top 3,000 ft MSL
3.2.1.8 Air Temperature (/TA).
Outside air temperature (/TA) is reported using two digits in degrees Celsius.
Negative temperatures is prefixed with an M (e.g., /TA 08 or /TA M08).
3.2.1.9 Wind Direction and Speed (/WV).
Wind direction and speed are encoded using three digits to indicate wind direction, relative to true north, and two or three digits to indicate reported wind speed. When the reported speed is less than 10 kts, a leading 0 is used.
The wind group will always have KT appended to represent the units in knots.
11/14/16 Aviation Weather Services AC 00-45H 3-32 Examples:
/WV 02009KT Wind 20 degre es at 9 kts /WV 28057KT Wind 280 degrees at 57 kts /WV 350102KT Wind 350 degrees at 102 kts
3.2.1.10 Turbulence (/TB).
Turbulence intensity, type, and altitude are reported after wind direction and speed.
Duration (intermittent (INTMT), occasional (OCNL), or continuous (CONS)) is coded first (if reported by the pilot), followed by the intensity (light (LGT), moderate (MOD), severe (SEV), or extreme (EXTRM)).
Range or variation of intensity is separated with a hyphen (e.g., MOD-SEV).
If turbulence was forecast, but not encountered, negative (NEG) is entered.
Type is coded second. Clear Air Turbulence (CAT) or CHOP is entered if reported by the pilot. High-level turbulence not associated with clouds (including thunderstorms) is reported as CAT.
Altitude is reported (last) only if it differs from value reported in the altitude/flight level (/FL) group. When a layer of turbulence is reported, height values are separated with a hyphen. If lower or upper limits are not defined, BLO or ABV is used.
Examples:
/TB LGT Light turbulence /TB LGT 040 Light turbulence at 4,000 ft MSL /TB OCNL MOD-SEV BLO 080 Occasional moderate to severe turbulence below 8,000 ft MSL /TB MOD-SEV CAT 350 Moderate to severe CAT at 35,000 ft MSL /TB NEG 120-180 Negative turbulence between 12,000 ft and 18,000 ft MSL /TB CONS MOD CHOP 220/NEG 230-280 Continuous moderate chop at 22,000 feet MSL, negative turbulence between 23,000 ft and 28,000 ft MSL /TB MOD CAT ABV 290 Moderate CAT above 29,000 ft MSL
11/14/16 Aviation Weather Services AC 00-45H 3-33 Turbulence reports should include location, altitude (or range of altitudes), and aircraft type, as well as, when reported, whether in clouds or clear air. The pilot determines the degree of turbulence, intensity, and duration (occasional, intermittent, and continuous). The report should be obtained and disseminated, when possible, in conformance with the Turbulence Reporting Criteria Table in the AIM, Chapter 7, Section 1.
3.2.1.11 Icing (/IC).
Icing intensity, type, and altitude are reported after turbulence.
Intensity is coded first using contractions TRACE, light (LGT), moderate (MOD), or severe (SEV). Reports of a range or variation of intensity is separated with a hyphen. If icing was forecast but not encountered, negative (NEG) is coded. Icing type is reported second. Reportable types are RIME, clear (CLR), or mixed (MX).
The AIM, Chapter 7, Section 1 provides classification of icing intensity according to its operational effects on aircraft, as well as tables of icing types and icing conditions.
The reported icing/altitude is coded (last) only if different from the value reported in the altitude/flight level (/FL) group. A hyphen is used to separate reported layers of icing. Above (ABV) or below (BLO) is coded when a layer is not defined.
Pilot reports of icing should also include air temperature (/TA).
Examples:
/IC LGT-MOD MX 085 Light to moderate mixed icing, 8,500 ft MSL /IC LGT RIME Light rime icing /IC MOD RIME BLO 095 Moderate rime icing below 9,500 ft MSL /IC SEV CLR 035-062 Severe clear icing 3,500 ft to 6,200 ft MSL
3.2.1.12 Remarks (/RM).
The remarks (/RM) group is used to report a phenomenon that is considered important but does not fit in any of the other groups. This includes, but is not limited to, LLWS reports, thunderstorm lines, coverage and movement, lightning, sulfur dioxide (SO2) gas smell, clouds observed but not encountered, and geographical or local descriptions of where the phenomenon occurred. Hazardous weather is reported first. LLWS is described to the extent possible.
11/14/16 Aviation Weather Services AC 00-45H 3-34
3.2.1.12.1 Wind Shear.
Ten kts or more fluctuations in wind speed (+/-10KTS), within 2,000 ft of the surface, require an Urgent (UUA) pilot report. When LLWS is entered in a pilot report, LLWS is entered as the first remark in the remarks (/RM) group.
Example:
/RM LLWS +/-15 KT SFC-008 DURC RY22 JFK Remarks, LLWS, air speed fluctuations of plus or minus 15 kts, surface to 800 ft during climb, Runway 22, John F.
Kennedy International Airport, NY.
3.2.1.12.2 FUNNEL CLOUD, TORNADO, and WATERSPOUT.
Funnel cloud, tornado, and waterspout are entered with the direction of movement, when reported.
Example:
/RM TORNADO W MOV E Remarks, tornado west moving east
3.2.1.12.3 Thunderstorm.
Thunderstorm coverage is coded as isolated (ISOL), few (FEW), scattered (SCT), numerous (NMRS) followed by description as line (LN), broken line (BKN LN), solid line (SLD LN), when reported. This is followed with TS, the location and movement, and the type of lightning, when reported.
Example:
/RM NMRS TS S MOV E Remarks, numerous thunderstorms south moving east
3.2.1.12.4 Lightning.
Lightning frequency is coded as occasional (OCNL) or frequent (FRQ), followed by type as lightning in cloud (LTGIC), lightning cloud to cloud (LTGCC), lightning cloud to ground (LTGCG), lightning cloud to air (LTGCA), or combinations, when reported.
Example:
/RM OCNL LTGICCG Remarks, occasional lighting in cloud, cloud to ground
3.2.1.12.5 Electrical Discharge.
For an electrical discharge, DISCHARGE is coded followed by the altitude.
11/14/16 Aviation Weather Services AC 00-45H 3-35 Example:
/RM DISCHARGE 120 Remarks, discharge, 12,000 ft MSL
3.2.1.12.6 Clouds.
Remarks are used when clouds can be seen but were not encountered and reported in the sky condition group (/SK).
Examples:
/RM CB E MOV N Remarks, cumulonimbus east moving north /RM OVC BLO Remarks, overcast below
3.2.1.12.7 Plain Language.
If specific phraseology is not adequate, plain language is used to describe the phenomena or local geographic locations. Remarks that do not fit in other groups like during climb (DURC), during descent (DURD), reach cruising altitude (RCA), top of climb (TOP or TOC), are included.
Examples:
/RM DONNER SUMMIT PASS
3.2.1.12.8 Volcanic Eruptions.
Volcanic ash alone is an Urgent PIREP. A report of volcanic activity includes as much information as possible including the name of the mountain, ash cloud and movement, height of the top and bottom of the ash, etc., is included.
Example:
/UUA/OV ANC240075/TM 2110/FL370/TP DC10/WX VA/RM VOLCANIC ERUPTION 2008Z MT AUGUSTINE ASH 40S MOV SSE Urgent Pilot Weather Report, 240 degrees at 75 NM from Anchorage International Airport, AK, 2110 UTC, flight level 370, a DC10 reported volcanic ash, remarks, volcanic eruption occurred at 2008 UTC Mount Augustine, ash 40 NM south moving south-southeast.
3.2.1.12.9 SKYSPOTTER.
The SKYSPOTTER program is a result of a recommendation from the Safer Skies FAA/Industry Joint Safety Analysis and Implementation Teams. The term SKYSPOTTER indicates a pilot has received specialized training in observing and reporting in-flight weather phenomenon or PIREPs.
When a PIREP is received from a pilot identifying themselves as a SKYSPOTTER aircraft, the additional comment “/AWC” is added at the end of the remarks section of the PIREP.
11/14/16 Aviation Weather Services AC 00-45H 3-36 An AWC-WEB/xxxx in the remarks indicates the pilot report was submitted by an airline dispatcher or Center Weather Service Unit (CWSU) meteorologist directly to the Aviation Weather Center (AWC). The xxxx represents the airline abbreviation or air route traffic control center (ARTCC) of the CWSU that submitted the PIREP.
Example:
PIREP TEXT/RM REMARKS/AWC
PIREP TEXT/RM REMARKS/AWC-WEB/KZFW
3.2.2 Air-Reports (AIREP).
AIREPs are messages from an aircraft to a ground station. AIREPs are normally comprised of the aircraft’s position, time, flight level, estimated time of arrival (ETA) over its next reporting point, destination ETA, fuel remaining, and meteorological information. It is beyond the scope of this advisory circular (AC) to describe the details of all the elements in the AIREP, but this paragraph will focus on the meteorological information.
The AWC’s Web site provides AIREPs over the CONUS and portions of the Atlantic and Pacific Oceans.
3.2.2.1 AIREP Types and Content.
There are two types of AIREPs, routine or position report (ARP) and special (ARS). AIREPs can be reported by the pilot but the majority of routine AIREPs are automated and downlinked from the aircraft to a service provider,
e.g., a flight planning company, for processing and forwarding to an airline and the NWS.
The majority of AIREPs report wind and temperature at selected intervals along the flight route, derived from onboard sensors and probes. Some aircraft are equipped with sensors and probes to measure humidity/water vapor, turbulence, and icing data.
The format for the AIREP is governed by ICAO. The AWC’s Web site includes AIREPs on their PIREP Web page that is formatted for Web display with some weather elements decoded.
3.2.2.2 AIREP Examples.
The following examples are from http://www.aviationweather.gov. The actual airline’s call sign was replaced with a fictitious call sign and the Special AIREP was created from the routine report.
Routine AIREP Example:
ARP XXX836 2443N 15516W 2229 F350 M43 315/128 TB LGT
11/14/16 Aviation Weather Services AC 00-45H 3-37 ARP Routine report XXX836 Aircraft call sign 2423N 15516W Location in latitude and longitude, 24 degrees 23 minutes north, 155 degrees 16 minutes west F350 Flight level or altitude, FL350 M43 Temperature in Celsius, minus 43 ºC 315/128 Wind direction (true) and speed, 315 degrees (true) and 128 kts TB LGT Light turbulence Special AIREP Example:
ARS XXX836 2443N 15516W 2229 F350 M43 315/128 TB SEV ARS Special AIREP Same as the routine example except:
TB SEV Severe turbulence
3.3 Radar Observations.
3.3.1 Description.
Weather radar observations and their resultant images are graphical displays of precipitation and non-precipitation targets detected by weather radars. Weather Surveillance Radar–1988 Doppler (WSR-88D), also known as next generation weather radar (NEXRAD), displays these targets on a variety of products, which can be found on the Web sites of all NWS Weather Forecast Offices (WFO), the AWC, Storm Predication Center (SPC), and various flight planning and weather service providers.
3.3.2 Issuance.
WSR-88D radars are continuously generating radar observations. Each radar observation, called a volume scan, consists of 5 to 14 separate elevation “tilts,” and takes between 4 and 11 minutes to generate, depending on the radar’s mode of operation. Once one observation is complete, the next one begins. Radar observation times are not standard, nor are they synchronized with other radars. The valid time of the observation is the time assigned to the product, which is the end of the last radar scan.
3.3.2.1 WSR-88D Radar (NEXRAD) Network.
The WSR-88D radar network consists of 160 radars operated by the NWS, FAA, and Department of Defense (DOD). Figure 3-6, Location of WSR-88D Weather Radar in the CONUS and Their Respective Coverage at 4,000 Feet AGL, 6,000 Feet AGL, and 10,000 Feet AGL, and Figure 3-7, Location of
11/14/16 Aviation Weather Services AC 00-45H WSR-88D Weather Radar Outside of the CONUS, show the location of the radars.
Figure 3-6. Location of WSR-88D Weather Radar in the CONUS and Their Respective Coverage at 4,000 Feet AGL, 6,000 Feet AGL, and 10,000 Feet AGL VCP12 Coverage 4,000 ft above ground level* 6,000 ft above ground level* 10,000 ft above ground level* * Bottom of beam height (assuming Standard Atmospheric Refraction).
Terrain blockage indicated where 50% or more of beam blocked.
125 250 500 750 Miles 3-38
11/14/16 Aviation Weather Services AC 00-45H 3-39 Figure 3-7. Location of WSR-88D Weather Radar Outside of the CONUS
3.3.2.2 Coverage.
Figure 3-6 depicts the radar coverage over the CONUS at 4,000 ft AGL, 6,000 ft AGL, and 10,000 ft AGL (i.e., above the height of the radar). Several WSR-88D radars are located in mountainous areas, such as the western United States. For example, the radar in southern Utah (near Cedar City) is on top of a 10,000-foot mountain. This means that the coverage begins at 10,000 ft AGL in that area. Any precipitation from low-topped clouds would not be detected by this radar due to overshooting of the radar beam (see paragraph 3.3.7.1).
3.3.3 Modes of Operation.
The WSR-88D employs scanning strategies in which the antenna automatically raises to higher and higher preset angles, or elevation scans, as it rotates. These elevation scans comprise a volume coverage pattern (VCP). Once the radar sweeps through all elevation slices, a volume scan is complete. The WSR-88D radar can use several VCPs.
There are two main classes of VCPs, which are commonly referred to as Clear Air and Precipitation Modes.
11/14/16 Aviation Weather Services AC 00-45H 3-40
3.3.3.1 Clear Air Mode.
In Clear Air Mode, the radar is in its most sensitive operation. This mode has the slowest antenna rotation rate, which permits the radar to sample the atmosphere longer. This slower sampling increases the radar’s sensitivity and ability to detect smaller objects in the atmosphere. The term “clear air” does not imply “no precipitation” mode. Even in Clear Air Mode, the WSR-88D can detect light, stratiform precipitation (e.g., snow) due to the increased sensitivity.
Many of the radar returns in Clear Air Mode are airborne dust and particulate matter. The WSR-88D images are updated approximately every 10 minutes when operating in this mode.
3.3.3.2 Precipitation Mode.
Precipitation targets typically provide stronger return signals to the radar than non-precipitation targets. Therefore, the WSR-88D is operated in Precipitation Mode when precipitation is present, although some non-precipitation echoes can still be detected in this operating mode.
The faster rotation of the WSR-88D in Precipitation Mode allows images to update at a faster rate approximately every 4 to 6 minutes.
3.3.4 Echo Intensities.
Figure 3-8. WSR-88D (NEXRAD) Weather Radar Echo Intensity Legend
The colors on radar images represent the reflective power of the precipitation target. In general, the amount of radar power received is proportional to the intensity of the precipitation. This reflective power, commonly referred to by meteorologists as