AC 120-53B

Change 1Historical

Advisory circular · Guidance for Conducting and Use of Flight Standardization Board Evaluations

A newer version is currentThis is a historical version. AC 120-53C is the version in force, approved September 11, 2025.
Approved
October 24, 2016
Last reviewed
August 9, 2024
This change
CHG 1 of AC 120-53B.
Cancels
AC120-53B
Family
AC 120-53 · 5 versions
Revision
B, change 1
14 CFR parts
121

Guidance, not mandatory unless a rule or AD requires it. DRS record last changed November 22, 2025.

Show pages 37–48
Page 49 · 6Open in PDF

Appendix 3

b. Test Subjects. Test subjects are designated FAA FSB members, trained, experienced, and current on the base aircraft and have completed the applicant’s proposed differences or related aircraft differences training in the candidate aircraft. Training to proficiency in the base aircraft may be provided to the designated FSB members by the applicant before the start of testing.

c. Test Process. T3 is a system difference test and a validation of training and checking.

It is used when the equivalent handling test (T2) is successfully completed or when T2 is being incorporated as part of T3. T3 is administered in two phases following differences or related aircraft differences training of a pilot in the candidate aircraft.

(1) First Phase. The successful completion of a pilot qualification flight check to assess pilot knowledge, skills, and abilities pertinent to operation of the aircraft being tested. If a full check is proposed, the tests are similar to those used for T1 as described in paragraph 2 above.

If a partial check is used, the process is similar, but the FSB determines the test items based on the applicant’s proposals. The first phase will include either a proficiency check as defined by the applicable CFR part, partial proficiency check, or individual aircraft system operation check administered to pilots in the FFS or candidate aircraft. The check is administered assuming currency in the base aircraft and completion of the proposed training in the candidate aircraft.

(2) Second Phase. Line-oriented flying (LOF) follows completion of the flight check.

The LOF phase of the test is used to validate the training and checking proposed, fully assess particular difference areas, examine implications of mixed fleet flying, assess special circumstances such as minimum equipment list (MEL) effects, and identify the effects of pilot errors potentially related to the differences. The test is done in a real line flight environment that includes typical weather, routes, airports, air traffic control (ATC), and other factors that are characteristic of those in which that aircraft will be operated. LOF tests may be conducted in test aircraft, FFS, or with a combination of these in conjunction with function and reliability aircraft type certification tests. The LOF portion of the test may be used to evaluate complex issues or issues that cannot be fully detailed in a brief flight check, since a check only samples pilot knowledge and skills in a limited and highly structured environment. LOF is an integral part of T3 and must be successfully completed before “initial” assignment of difference levels.

In developing and selecting scenarios for evaluation, consider the following:

• Likelihood of occurrence,

• Possible consequences, or

• The timeliness of pilot discovery and correction.

d. Successful Test. The FSB members decide the outcome of the T3 consistent with previously agreed upon criteria and completion of LOF with appropriate pilot performance.

Passing T3 leads to setting respective difference levels and validates differences and/or related aircraft differences training and checking at level B, C, or D between related aircraft.

e. Failure of Test. Failure of T3 occurs with either failure of the check, agreed criteria, or unsatisfactory performance during the LOF portion of the test. In certain failure cases, T3 can lead to assignment of level E and a separate type rating. When a T3 failure is due to deficiencies in the proposed training program, at the discretion of the FSB, T3 may be repeated using

Page 50 · 7Open in PDF

Appendix 3 different test subjects (pilots) following revision of the training program addressing the deficiencies. The following are examples that may lead to the assignment of level E differences:

(1) T3 experience or difficulties that show the need for assignment of training levels approaching typical initial/transition levels.

(2) T3 pilot performance that indicates that devices or methods associated with level D are not adequate to achieve training or checking objectives.

(3) Repeated failures of attempts to pass T3 test at level D training differences. In the case of retesting, new subjects may be required at the discretion of the FSB chairman.

NOTE: Repeated failure of test at level D differences by one or more subject’s (pilot) inadequate performance, that is not an individual subject’s failure due to subpar or atypical personal performance as determined by the FSB, may lead to assignment of level E differences.

6. CURRENCY VALIDATION—TEST 4 (T4).

a. Test Purpose. The T4 test is a currency test that can be used when an applicant seeks relief from existing FSB currency recommendations. In the context of this AC, currency addresses system procedural and maneuvering differences between related aircraft. T4 does not include takeoff and landing recency of experience.

b. Test Subjects. Designated FAA FSB members.

c. Test Process. If an applicant desires a change in the currency recommendations, a T4 test may be conducted. This test may be done before or after the aircraft enters into service. In the event the test cannot be done before entry into service, the FSB established limits apply. Criteria that may be used by the FSB to set differences for currency for initial FSB determinations include the following examples:

(1) Complex flight critical systems affecting control or navigation.

(2) Critical non-normal maneuvers differing between related aircraft (e.g., V1 engine failure, emergency descent, etc.), requiring one acceptable demonstration/training or checking event (typically 6 months but demonstration period may also vary by pilot position).

(3) Secondary systems (e.g., Oxygen or auxiliary power unit (APU)).

d. Successful Test. The FSB members decide the outcome of T4 consistent with previously agreed upon criteria. A successful test validates that the proposed less restrictive currency recommendations are accepted as a means of compliance with applicable rules, recommendations of this AC, and/or currency recommendations and provide an equivalent level of safety (ELOS).

Page 51 · 8Open in PDF

Appendix 3

e. Failure of Test. Failure indicates that the proposed less restrictive currency recommendations do not provide an ELOS. At the discretion of the FSB, retesting may be appropriate.

7. INITIAL OR TRANSITION TRAINING/CHECKING PROGRAM VALIDATION— TEST 5 (T5).

a. Test Purpose. T5 test validates the applicant’s training course(s) at level E (new type rating). It is appropriate when:

• A full initial or transition training/checking program requires validation;

• An applicant seeks training credits between two aircraft with different type ratings (a typical goal under shortened training programs); or

• T2 or T3 are failed.

b. Test Subjects. Designated FAA FSB members.

c. Test Process. There are two methods to accomplish the T5 test process:

(1) Full Initial or Transition Training/Checking Program Validation. This method is used when an applicant has developed an aircraft and seeks a new type rating without any credit for commonality with any related aircraft. The applicant develops a training program to qualify and check pilots in the candidate aircraft at level E differences. Subjects are trained, given flight proficiency checks, and complete LOF in a process similar to that described in paragraph 5.

(2) Shortened Transition Training/Checking Program Validation. This method is used when an applicant has developed an aircraft and seeks a new type rating and credit for commonality with related aircraft. The applicant conducts a handling qualities evaluation based on the applicant’s proposed ODR tables (similar to T2), followed by training and checking program validation (similar to T3). Subjects are trained, given flight proficiency checks, and complete LOF in a process similar to that described in paragraph 5.

NOTE: When an aircraft is assigned level E differences because of a failure of T3 test at level D differences, credit for successfully passing individual elements of the T3 test may be used as justification for not duplicating those elements in the T5 test.

d. Successful Test. The FSB members decide the T5 outcome consistent with previously agreed upon criteria. A successful outcome of T5 validates the proposed training and checking programs.

e. Failure of Test. Failing T5 indicates the proposed training or checking programs require modification. A retest by mutual agreement between the FSB and applicant would normally be required.

Appendix 3 Page 9 (and 10)

8. COMMON TAKEOFF AND LANDING CREDIT (CTLC)—TEST 6 (T6).

a. Test Purpose. Applicants use T6 when they seek credit between related aircraft toward the takeoff and landing recency-of-experience requirements of the applicable CFR.

b. Test Subjects. The test should consist of a sufficient number of pilots not trained or qualified in the candidate aircraft. These subjects will be drawn from the manufacturer, industry, and the FAA that the FSB determines will represent a statistically relevant cross-section of operational pilots. The participants’ experience levels, type ratings, and airplane currency should reflect the proficiency difference levels needed to validate testing assumptions.

c. Test Process. Test subjects are first provided refresher training in the base aircraft to establish a baseline of proficiency. This training may be accomplished in an approved C or D FFS. The subject is then tested in the candidate aircraft, without any training in it, accomplishing a minimum of three takeoffs and landings without use of the autopilot. It may not be practical to conduct some tests in an aircraft. An FFS may be used to conduct these tests. Test subjects should be evaluated on their ability to fly the aircraft manually through takeoff, initial climb, and approach and landing (including the establishment of final landing configuration). The applicant should consider the effects on the takeoff and landing maneuvers for the following factors when designing the T6 test:

(1) Aircraft weights.

(2) Aircraft center of gravity.

(3) Takeoff and landing crosswinds.

d. Successful Test. The FSB members decide the outcome of T6 consistent with the FAA practical test standards (PTS) by demonstrating that an ELOS can be maintained when full or partial credit for takeoffs and landings is given between the related aircraft.

e. Failure of Test. The test subjects’ performance relative to the FAA PTS demonstrates an ELOS cannot be maintained when either full or partial credit for takeoffs and landings is given between the related aircraft.

Advisory Circular Feedback If you find an error in this AC, have recommendations for improving it, or have suggestions for new items/subjects to be added, you may let us know by contacting the Air Transportation Division (AFS-200), or the Flight Standards Directives Management Officer at 9-AWA-AFS-140-Directives@faa.gov.

Subject: AC 120-53B CHG 1, Guidance for Conducting and Use of Flight Standardization Board Evaluations Date: _____________________ Please check all appropriate line items:

An error (procedural or typographical) has been noted in paragraph ____________ on pa ge _______.

Recommend paragraph _____________ on page __________ be changed as follows:

______________________________________________________________________ ______________________________________________________________________ In a future change to this AC, please cover the following subject:

(Briefly describe what you want added.)

______________________________________________________________________ ______________________________________________________________________ Other comments:

______________________________________________________________________ ______________________________________________________________________ I would like to discuss the above. Please contact me.

Submitted by: Date: ______________________