2-4
3. A description of the AMTS materials used at the primary location, and each additional training location.
4. A description of the manner in which the school’s curriculum will ensure the student has the knowledge and skills necessary for attaining a mechanic certificate and associated ratings under part 65 subpart D.
5. A description of the manner in which the school will ensure it provides the necessary qualified instructors to meet the requirements of § 147.19 (refer to § 147.5(b)(3)).
2.2.7.1.2 The school’s curriculum, that aligns with the Mechanic Airman Certification Standards (ACS) as required by § 147.17.
2.2.7.1.3 Evidence of accreditation, if the AMTS intends to meet the QC system requirements using accreditation as provided in § 147.23(a)(1).
2.2.7.1.4 A QC system, if the AMTS intends to meet the QC system requirements using a QC system as provided in § 147.23(a)(2).
Note: The AMTS must allow a reasonable amount of time for the FAA to review and approve requests for approval of a QC system.
2.2.7.1.5 Any other information applicable to the school’s training operations such as additional training locations or regulatory exemptions.
Note: AMTSs that are certificated prior to the effective date of the new part 147 (see paragraph 1.7.4) are not required to submit a new application for certification; however, the FAA must ensure that the new and changed requirements of part 147 can be met by the AMTS prior to conducting training.
Therefore, the certificated AMTS must work with their assigned Flight Standards office to provide all requisite information.
2.2.7.2 If co mpliance is demonstrated prior to the effective date of the IFR, the FAA will review the AMTS submission to ensure compliance with the new regulations and issue OpSpecs that are effective upon the effective date of the IFR. The AMTS may continue to conduct training operations.
2.2.7.3 If compliance is demonstrated after the effective date of the IFR, the FAA will issue OpSpecs once it has verified the part 147 requirements have been met.
In this instance, the AMTS will not be permitted to operate as a certificated AMTS during the period of time between the effective date of the IFR and the date upon which the FAA determines the new part 147 requirements have been met and issues new OpSpecs.
2.3 AMTS Certificate Requirements.
2.3.1 Duration of Certificate. Pursuant to § 147.7, an AMTS’s FAA certificate remains in effect until it is surrendered, suspended, or revoked.
2-5
2.3.2 Display of Certificate. Pursuant to § 147.29, an AMTS is required to display its FAA Air Agency Certificate in a location that is visible by and normally accessible to the public.
The certificate must be displayed in this manner at the primary location of the AMTS and at any additional fixed location.
Note: It is acceptable to display a copy of the Air Agency Certificate.
2.3.3 Advertising. Part 147 no longer addresses advertising requirements of an AMTS. The AMTS should ensure it complies with all Federal and state laws, as well as accreditation requirements, as applicable, that are in place to protect the public from false and misleading advertising.
2.3.4 FAA Inspection. Pursuant to § 147.27, an AMTS must allow the FAA access to its facilities for inspection for the purposes of determining the school’s compliance with the requirements of part 147. This includes access to the primary AMTS location and each additional training location. When a formal application is made to the FAA for certification, the applicant will be required to allow the FAA to inspect its facilities and equipment as part of the certification process. After certification, FAA inspections are conducted as determined by FAA surveillance program requirements. Typically, inspections are conducted at least annually, with additional inspections to be conducted as determined by the FAA. An FAA inspection may also be conducted when a school requests to add an additional training location.
2.4 Descriptions Required by § 147.5. An AMTS must develop and submit to the FAA the following descriptions relative to its training operations:
• A description of the facilities, including the physical address of the applicant’s primary location for operation of the school, and any additional fixed locations where training will be provided, and the equipment and materials to be used at each location.
See paragraph 2.8.
• A description of the manner in which the school’s curriculum will ensure the student has the knowledge and skills necessary for attaining a mechanic certificate and associated ratings under part 65 subpart D. See paragraph 2.7.1.
• A description of the manner in which the school will ensure it provides the necessary qualified instructors to meet the requirements of § 147.19. See paragraph 2.9.
2.4.1 Inclusion in AMTS OpSpecs. The descriptions provided to the FAA, pursuant to § 147.5, will be documented in the AMTS OpSpecs. Additionally, if descriptions are changed, the AMTS must provide the changes to the FAA in order for the documented changes to be updated in the OpSpecs to maintain compliance with their OpSpecs, pursuant to § 147.3.
The descriptions may be included in the OpSpecs by reference to a document provided by the AMTS, rather than including the description directly into the body of the OpSpec. In these instances, the document’s title, revision level, and revision date will be listed in the OpSpec, and the FAA will retain a copy of the document.
2-6
2.5 AMTS Quality Control System. As stated in § 147.23(a), each certificated AMTS must have a QC system by either:
• Being accredited within the meaning of Title 20 of the United States Code (20 U.S.C.) § 1001(a)(5) (see paragraph 2.5.1), or
• Establishing and maintaining a QC system approved by the FAA (see paragraph 2.5.2).
2.5.1 Accreditation. To be accredited within the meaning of 20 U.S.C. § 1001(a)(5) requires a school to be accredited by a Department of Education nationally recognized accrediting agency or association. Pursuant to 20 U.S.C. § 1001(c), the Secretary of Education publishes a list of all nationally recognized accrediting agencies or associations determined to be a reliable authority as to the quality of the education or training offered.
The list can be found on the Department of Education website. A school can become accredited by seeking recognition from one of the accrediting agencies recognized by the Department of Education. The accreditation may be for the entire institution (institutional accreditation) or limited to a part of an institution or the AMTS program itself (specialized or programmatic accreditation).
2.5.1.1 The Department of Education’s recognition of accrediting agencies is limited by statute to accreditation activities within the United States. As such, in order to be accredited within the meaning of 20 U.S.C. § 1001(a)(5), an AMTS must have its primary location within the United States.
• For an AMTS with the primary location located within the United States, the AMTS’s accreditation extends to any additional training locations, whether located within or outside the United States.
• For an AMTS whose primary location is outside of the United States, accreditation is not recognized by the Department of Education and therefore does not satisfy § 147.23(a)(1). The AMTS must establish and maintain a QC system pursuant to § 147.23(b), for the primary location and any additional training locations whether located within or outside the United States.
2.5.1.2 In order to demonstrate accreditation under § 147.23(a), a school should have documentation that shows the school’s accrediting agency and the school’s current accreditation status. The AMTS should notify the FAA when there are changes to its accreditation, such as changes to the accrediting agency or a lapse in accreditation.
Note: If the AMTS is not accredited, it must have and use a QC system that is FAA approved.
2.5.1.3 Pre-accreditation does not meet the requirements of § 147.23(a), since the regulation specifically requires “accreditation.”
2-7
2.5.2 FAA-Approved QC System. Schools that are not accredited within the meaning of 20 U.S.C. § 1001(a)(5) must obtain FAA approval of a QC system; however, the regulation does not preclude an accredited school from obtaining an FAA-approved QC system should they choose that manner of compliance with § 147.23. An AMTS with an FAA-approved QC system must continually maintain that system under § 147.23(a)(2).
For new applicants for AMTS certification, the QC system must be submitted to the FAA for approval during the certification process, and any subsequent revisions to the system must be submitted for approval. Pursuant to § 147.23(b), the QC system must include procedures for the following, which are discussed in detail in paragraphs 2.5.3 through 2.5.10:
• Recordkeeping,
• Assessment,
• Issuing credit,
• Issuing of final course grades,
• Attendance,
• Ensuring sufficient number of instructors,
• Granting of graduation documentation, and
• Corrective action for addressing deficiencies.
2.5.3 Recordkeeping. The AMTS recordkeeping procedures should describe the types of records the school will produce and retain, and for how long. Recordkeeping procedures should encompass all records produced within the QC system to include:
1. Records of assessment of a student’s knowledge and skill, as applicable to the curriculum for which the student is enrolled. Records should clearly distinguish between successful performance and unsuccessful performance.
2. Records showing credit granted for previous experience and/or previous instruction, including supporting transcripts, when applicable. Records should clearly show what subject areas were credited to the student based on the school’s evaluation of previous experience or training using the school’s crediting procedures.
3. Records of the student’s grades, to include final course grades, as applicable. Records should clearly distinguish between successful performance and unsuccessful performance.
4. Records of student attendance relative to the school’s attendance policy.
5. Records of curriculum completion and records showing issuance of graduation documentation, and/or records showing general curriculum course content completion and issuance of general curriculum course content completion documentation.
6. Records showing identified deficiencies of the QC system and records showing the school’s corrections of those deficiencies. If follow-up audits are performed to validate corrective actions, those records should also be retained.
2-8
7. Examples of the forms the school will use for records described above.
8. Record retention procedures should state how long the school will retain its records. It is recommended the school retain records for at least 2 years after the end of the student’s enrollment. Any record archival policy should also be described in the school’s recordkeeping procedures.
2.5.3.1 Electronic/Digital Recordkeeping. If the AMTS chooses to use electronic/digital recordkeeping for any of the records described in the school’s QC system, it is recommended that the school incorporate the guidelines put forth in AC 120-78, Electronic Signatures, Electronic Recordkeeping, and Electronic Manuals, in developing its electronic/digital recordkeeping procedures. The FAA will issue OpSpec A025 to authorize digital/electronic recordkeeping.
2.5.4 Assessment. AMTS course testing/assessment (not FAA-administered tests), including preparation and post-test reviews, is an important part of the learning process and is considered part of the teaching validation process. Testing should be directly related to the subject matter and consistent with the expected learning outcome. Assessment procedures should include:
• When and how the school will assess its students;
• How the school ensures testing integrity in all testing environments (e.g., classroom, shop, computer-based testing, distance learning testing, etc.);
• How the school ensures test security; and
• How the school handles instances of cheating on tests.
2.5.4.1 It is recommended that upon completion of each curriculum subject area, a test should be scheduled. In addition, quizzes may be scheduled at the school’s discretion at any time. When testing for subjects that have many hours of instruction, an AMTS should consider planning more than one test or quiz during the instructional unit.
2.5.4.2 Test security procedures should include provisions for regular test revisions and the secure storage of tests and quizzes.
2.5.5 Issuing Credit. The school must have procedures that describe how and when the AMTS will issue credit for a subject or course. These procedures should include:
• How the AMTS issues credit for its courses delivered as a part of its part 147 curriculum.
2-9
• If, and under what circumstances, the school credits a student’s prior instruction or experience.
• How the school will determine the amount of credit to be given that ensures the student’s prior experience or training is equivalent to the curriculum for which the student is receiving credit.
2.5.5.1 Crediting Prior Instruction. The AMTS should only grant credit for previous instruction that has been satisfactorily completed at:
• An accredited university, college, community college, or junior college;
• An accredited vocational, technical, trade, or high school;
• A military technical school; or
• Another certificated AMTS.
2.5.5.2 Crediting Prior Experience. The AMTS should only credit previous maintenance experience after examining documents that verify that experience.
2.5.5.3 Determining Issuance of Credit. The AMTS should determine the amount of credit to be given as it relates to the training requirements provided in § 147.17. An AMTS should utilize the following methods:
• An evaluation of an authenticated transcript from the student’s former AMTS (applicable for prior instruction),
• A qualifying entrance test equal to one given to students who complete the corresponding curriculum content at the crediting AMTS (applicable to either prior instruction or prior experience), or
• Another method that verifies the student’s previous training or experience meets the crediting school’s curriculum requirements.
2.5.5.3.1 When basing credit on an evaluation of an authenticated transcript, the crediting AMTS should ensure the individual has completed training comparable (i.e., meets or exceeds the curriculum content) of that offered by the crediting school. The AMTS should be able to show documented evidence of the evaluation. Evaluation of a transcript could be based on a combination of the following:
• Detailed transcripts.
• The course catalog description of the course that was completed by the student.
2-10
• Audits of the class for which the credit is to be based when crediting a specific course on a routine basis. In this circumstance, the AMTS should define its audit schedule within the QC procedures.
• Other documents showing the course content on which the credit is being based.
2.5.5.3.2 When using an entrance test to determine the credit to be granted, the test should be equal to one given to students who complete the corresponding curriculum content at the school. This is applicable to either prior instruction or prior experience. The entrance test should include both knowledge and skill components of the curriculum to which credit is being granted.
2.5.5.3.3 Generally, creditable previous mechanic experience should be aviation maintenance experience comparable to the required AMTS curriculum subject areas.
• Example 1: An individual with substantial powerplant experience (no airframe experience) gained while working in the military or at an airline should be considered as having previous experience only within powerplant subject areas.
• Example 2: An uncertificated mechanic working for an airline for 5 years only in the tire shop should not be considered to have experience relating to all airframe subjects.
2.5.5.4 Credit for the General Curriculum. A school may credit a student seeking an additional mechanic certificate rating with previous satisfactory completion of the general curriculum content. If an individual has obtained a mechanic certificate with either an airframe rating or a powerplant rating, that rating indicates the individual has met the knowledge requirements for issuance of a mechanic certificate, which includes knowledge and skills that would be required within the general portion of an AMTS curriculum. Therefore, a student who is seeking an added rating to their mechanic certificate may be issued graduation documentation by the AMTS upon completion of the applicable curriculum, even though the student did not complete the general portion of the AMTS curriculum.
2.5.5.5 Exceptions to Crediting Procedures.
• If an AMTS Air Agency Certificate has been suspended by the FAA, courses taught during the suspension period cannot be credited retroactively, even if the school becomes re-certificated later, because the AMTS would be operated in violation of § 147.7.
• An AMTS applicant may not teach students as an AMTS before receiving an FAA certificate and then give credit for that training after the school becomes certificated, because the AMTS would be operating in violation of § 147.3.
2-11
2.5.6 Issuing of Final Course Grades. The AMTS QC system must include procedures that describe how the AMTS will issue final course grades. The procedures should describe the AMTS’s standards for passing grades to include:
• The minimum passing grade sufficient to achieve the required knowledge and skills of the school’s curriculum;
• How grade weighting (percentage) and/or grade averaging will be used to determine the final course grade, as applicable;
• Forms or samples of electronic records the AMTS will use for recording grades;
• Any other procedures the school uses to determine final course grades; and
• A description of any audit or verification procedures the AMTS will use to ensure accuracy of the final grade.
2.5.6.1 A common academic standard for passing is a minimum score of 70 percent, and the FAA written, oral, and practical tests have a 70 percent minimum passing standard in accordance with § 65.17. The AMTS should define its standard for a passing final course grade in its QC system procedures (refer to § 147.23(b)). However, it is recommended that the school does not implement a passing standard lower than 70 percent, to support the school in meeting the quality of instruction requirements of § 147.25.
2.5.6.2 Theoretical portions of the curriculum may have different grading standards from those required in laboratory and shop classes.
2.5.7 Attendance. The QC system must include attendance procedures. Procedures should include the following:
• The AMTS attendance policy for courses that are required for curriculum completion.
• How the AMTS will track student attendance when required by its attendance policy.
• Any limitations on student attendance or enrollment, such as limiting class hours in a day/week, or limiting enrollment in additional courses.
Note: Depending on the basis of the curriculum, attendance policies can vary greatly. For example, schools basing their curriculum on hours may have more strict or detailed attendance requirements than schools basing their curriculum on credit-hours or competency.
2.5.8 Ensuring Sufficient Number of Instructors. The school must have QC system procedures describing how the school will ensure it maintains a sufficient number of instructors to achieve the school’s training requirements. Procedures should include the following:
2-12
• A description of how the AMTS will ensure the 25:1 student-to-instructor ratio required by § 147.19(c) is maintained.
• A description of any other requirements the AMTS is placing on student-to-instructor ratios for the purpose of achieving the school’s training requirements.
2.5.9 Granting of Graduation Documentation. The school must have QC system procedures describing how it grants graduation documentation under § 147.21 and completion documentation required for early testing under § 147.31.
2.5.9.1 Section 147.21, Certificate of Completion. Under § 147.21, when a student satisfactorily completes the required curriculum content for graduation, the school must issue an authenticated document to the graduating student. A graduation document may only be issued consistent with the school’s ratings.
The procedures for issuing the authenticated document should include the following:
2.5.9.1.1 A description of the document to be issued and what information will be included on the document. At a minimum, the following information should be included on the document in order to meet the requirements of § 147.21(a):
• Student name, indicating who the document was issued to.
• School name and Air Agency Certificate number, to indicate who issued the document and that the document was issued by an FAA-certificated AMTS.
• Authentication, using the method of authentication determined by the school to show the document was issued legitimately.
• The student’s date of graduation.
• The name of the curriculum completed by the student (i.e., either “Airframe”, “Powerplant”, or “Airframe and Powerplant”).
2.5.9.1.2 A description of the authentication process used by the school to ensure the document was legitimately issued by the school, and a description of designated school personnel authorized to authenticate the document. For example, schools may use a signature, an embossed seal, or some other method to indicate authentication, and may limit the performance of authentication to certain school officials.
2.5.9.1.3 The process used to verify the student has passed the curriculum based on the school’s standards for issuing final course grades, any attendance requirements, and/or crediting of the AMTS curriculum that was based on prior instruction or experience.
2.5.9.1.4 How the school ensures the student is eligible to receive the graduation certificate.
2-13
2.5.9.2 Section 147.31. Under § 147.31, when a student satisfactorily completes the general portion of a school’s curriculum, the school may issue an authenticated document that demonstrates the student’s preparedness to take the FAA mechanic general written test in accordance with § 65.75(c). When a school intends to support the option of the early testing provision, the QC system procedures should include procedures describing how the school issues the required document that will allow early testing under § 65.75(c). At a minimum, the following information should be included on the document in order to meet the requirements of § 147.31:
• Student name, indicating who the document was issued to.
• School name and Air Agency Certificate number, to indicate who issued the document and that the document was issued by an FAA-certificated AMTS.
• Authentication, using the method of authentication determined by the school to show the document was issued legitimately.
• The student’s date of graduation.
• Indicate the document demonstrates completion of the general curriculum content of the school’s curriculum.
Note: Some schools incorporate the general curriculum content as a part of the Airframe and/or Powerplant curriculum content. Students may be issued a completion document as long as the school can identify and verify that the student has completed the general curriculum content requirements of the school.
2.5.9.3 Electronic Signatures. If the AMTS chooses to use electronic signatures on the authenticated document issued under § 147.21 or § 147.31, the school should describe its electronic signature procedures within its QC system. It is recommended that the school incorporate the guidelines put forth in AC 120-78 in developing its electronic signature procedures. The FAA will issue OpSpec A025, to authorize the AMTS use of electronic signatures.
2.5.10 Corrective Action for Addressing Deficiencies. The school must have QC system procedures which describe how the school will take corrective action for addressing deficiencies. The term “deficiencies” refers to deficiencies or defects within the school’s QC system. The procedures should include a description of the following:
• How the school will receive and record reports of deficiencies.
• How the school will determine the cause of the deficiency.
• How the school will develop, implement, and track correction of deficiencies.
• How the school will perform follow-up to ensure deficiencies have been adequately corrected.
2-14
2.5.11 QC System Format. The AMTS should consolidate its QC system policy and procedures into a single manual/document because the entire QC system receives FAA approval through OpSpec A027. However, the OpSpec does allow the listing of multiple approved documents that make up the QC system, if applicable. The AMTS should not include procedures that are not specified by § 147.23(b) within the QC system documents being approved by the FAA, unless the additional procedures are clearly noted as being not a part of the FAA-approved QC system.
2.5.11.1 FAA approval of the QC system described under paragraphs 2.5.2 through 2.5.11 is provided by issuance of OpSpec A027, which indicates the revision level and date of the QC procedures currently approved by the FAA.
2.5.11.2 Because § 147.23 requires that a QC system be FAA approved, if a school revises the procedures of its QC system, the school must receive FAA approval of the revised system prior to implementing those changes. It is important that the AMTS have a means of maintaining revision control of its QC document(s). This provides a way for both the AMTS and the FAA to verify if the school is maintaining its compliance with the requirements of part 147. The following controls should be included in any manual or document system for revision control, as appropriate:
• Revision Procedures. Define in writing the revision procedures for its manuals/documents to ensure consistent and correct application.
• List of Effective Pages (LEP). The LEP shows the current active pages of the document, to include their date of revision and revision level.
• Record of Revisions. This page is a running list of the revisions that have been applied to the document historically, and includes the revision level and date of the revision.
• Highlights of Revision. This page is based on the current revision and briefly describes the changes that were implemented within the document.
The details should be described on a page-by-page level.
• Form Control. Forms should include a form-specific revision level identified on the form. Forms may be included within the document, within an appendix, or within a separate forms manual.
• Identify Revised Text. Revised text within the document should be identified. Vertical change bars adjacent to the revised text, highlighting text, or another method of identifying revised text could be used.
2.6 Other AMTS Procedures. All AMTS are encouraged to develop additional procedures regarding their training operations. The procedures should be directed at AMTS personnel and students to provide transparency in expectations. While additional procedures are encouraged, they should not be included in the FAA-approved portion of a school’s QC system. Doing so can create confusion when determining regulatory compliance with part 147. Certain additional AMTS procedures may be required by
2-15 regulation (e.g., some exemptions include a requirement for procedures), or may affect how the AMTS or students comply with a related regulation (e.g., testing under § 65.80).
Some examples of other policy and procedures that an AMTS is encouraged to develop are included below.
2.6.1 Safety Procedures. The aviation maintenance environment can be dangerous, especially to those who are not knowledgeable of its hazards and risk. To prevent serious injury or death to students and AMTS personnel, the FAA encourages the AMTS to develop clear policy and procedures to ensure the safety of its training operations and conform to local, state, and Federal regulations for workplace safety. The FAA highly recommends that AMTSs contemplate the mitigation of hazards associated with performing high risk training operations, using the following guidelines:
• Any training equipment used by the AMTS to include tools or other devices, with the capability to operate, actuate, or store energy, or that otherwise has the potential to expose a person to injury, should be evaluated by the AMTS for hazards and safety risk.
• The use of chemicals such as cleaners, lubricants, and flammable liquids (refer to material safety data sheets (MSDS)) during training operations should be evaluated by the AMTS for hazards and safety risk.
• The AMTS should develop safety policy and procedures that ensure the equipment or chemical’s safe use in all training scenarios, by mitigating risk to acceptable levels.
• Safety procedures should include checklists wherever applicable. Training should be provided, to AMTS personnel and students, on the checklists prior to their use.
• The school’s curriculum should include or reference briefings on all safety procedures appropriate to laboratory or shop practical projects. The briefings should be readily available to instructors and students and be used to increase safety awareness prior to high risk training operations.
2.6.2 AMTS Safety Programs. As FAA certificate holders, AMTSs may voluntarily disclose apparent violations of part 147 to the FAA under the Voluntary Disclosure Reporting Program (VDRP). Written procedures could provide expectations and guidance to AMTS personnel. The procedures should define who is responsible for making disclosures, describe internal AMTS procedures related to disclosures, and include or refer to the applicable procedures of AC 00-58, Voluntary Disclosure Reporting Program. The VDRP web page can be found at https://vdrp.faa.gov/.
2.6.3 Student Testing Under § 65.80. AMTS students may take their FAA oral and practical tests prior to taking their FAA written tests, when done in accordance with § 65.80.
Because § 65.80 contains certain requirements that must be met, AMTSs are encouraged to develop written procedures to ensure those requirements are met before the school authorizes the student to test under § 65.80 (i.e., by signing the appropriate blocks on FAA Form 8610-2, Airman Certificate and/or Rating Application). Having written procedures may streamline the FAA approval process for these test authorizations. The procedures should address the following: