9. Appendix 1 provides supplemental illustrations for inspection, maintenance, and installation of engine lever and cable controls. These figures are for guidance only and may not represent actual installations.
S/ Marvin Nuss for Michael Gallagher Manager, Small Airplane Directorate Aircraft Certification Service 13
Appendix 1 APPENDIX 1
SUPPLEMENTAL ILLUSTRATIONS FIGURE 1. INSTRUMENT PANEL CONTROL CONFIGURATION
FLEXIBLE
CONDUIT Z RIGID
CONDUIT STAKE KNOB
INSTRUMENT PANEL
FRICTION
JAMB LOCK NUT NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 2. SWIVEL (SWAGED) BALL JOINT INSPECTION CONFIGURATION
CONTROL ASSEMBLY
SWIVEL BALL JOINT
DUST SEAL PAD .050 MOVEMENT PLUNGER GUIDE— TYPICAL NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 3. CONTROL CABLE ROUTING FROM HIGH HEAT SOURCES
ALTERNATE AIR
CONTROL CABLE
TIES LACING MIXTURE CONTROL CABLE
PROPELLER
CONTROL CABLE AND
FIRESLEEVE
COWL FLAP
CONTROL THROTTLE
CABLE CONTROL CABLE NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 4. CONTROL CABLE ROUTING FROM HIGH HEAT SOURCES
PROPELLER
AND CONTROL A CONTROL CABLE MIXTURE
FIRE SLEEVEJ CLAMPS WITH LINK NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 5. CONTROL ROUTING IN ENGINE COMPARTMENT
CONTROL ASSEMBLY
CARBURETOR HEAT -CARBURETOR BOLT MUST PIVOT FREELY
CLAMP A *-AIR BOX
SECURE ON
CABLE HOUSING
O MAXIMUM BEND
RADIUS POSSIBLE NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 6. CONTROL CABLE BEND RADI
PREFERRED ROUTING
OF MIXTURE CONTROL
UNDESIRABLE
ROUTING OF
TO MIXTURE
INSTRUMENT CONTROL PANEL
UNDESIRABLE ROUTING OF
THROTTLE CONTROL
PREFERRED ROUTING OF MOUNTING
THROTTLE CONTROL
BRACKET
FIREWALL CLAMP NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 7. CONTROL SYSTEM OVERVIEW
SWIVEL HOUSING SLEEVE
CONTROL WIRE ASSEMBLY FRICTION SPRING & BALL
WASHER- MIXTURE
CONTROL
- NUT
WASHER- COTTER PIN
OCONTROL HOUSING
A CABLE CLAMP- CARBURETOR 7 CABLE CLAMP INSTRUMENT _PANEL — FACEPLATE
INSTRUMENT
CONTROL PANEL
SUPPORT KNOB
FIREWALL SPACER
MAXIMUM BEND
RADIUS POSSIBLE
SECURE ON
CABLE HOUSING NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 8. CONTROL CABLE ROUTING IN HIGH
HEAT SOURCE AREAS
MIXTURE
CONTROL SHIELD COWL FLAP
CABLE CONTROL CABLE _ BRACKET
FIRE SLEEVE
ALL FOUR
CONTROL CABLES ~ CLAMP
THROTTLE PROPELLER
CONTROL CONTROL
CABLE CABLE NOTE: For guidance information only. May not represent actual installations.
Appendix 1 FIGURE 9. CONTROL CABLE SECURITY
BRACKET SHIELD CLAMP-
ALTERNATE AIR-
CONTROL CABLE
LACING TIE-S NOTE: For guidance information only. May not represent actual installations.