Appendix 2 AC 21-2B Page 32 10/2/69
(e) A catalog of spare parts relating to the aircraft, aircraft engine(s), propeller (s), and major auxiliary equipment installed.
(f) Iwo copies each of operating, maintenance, overhaul, and repair manuals applying to the aircraft, aircraft engine, propeller, and all ofthe equipment installed on the aircraft.
(g) A list of the necessary special tools and equipment (including a tolerance chart) essential to the inspection and servicing of the aircraft, engines, propellers, and associated equipment. This should include inspection timetables, and appropriate charts and instructions relating to the installed systems.
(h) Two copies of information or instructions essential to the assembly and rigging of the aircraft.
(1) A list of communication and navigation equipment installed by make and model, and operating instructions.
1 In the case of an aircraft intended for instrument flight rules (IFR) operation, a statement should be furnished to the effect that the communication and navigation equipment complies with TSO/FAATC specifications.
Manuals are needed for radio equipment exported to Israel for the first time.
(2) In case an aircraft of the same model previously has been exported to and certificated in Israel, the following documents or material shall be furnished by the exporter or by the Government of the country of origin.
(a) A certificate of airworthiness for export listing the propeller serial numbers, when applicable, as well as the engine serial numbers.
(b) A list of communication and navigation equipment installed by make and model, and operating instructions.
In the case of an aircraft intended for IFR operation, a statement should be furnished to the effect that the communication and navigation equipment complies with TSO/FAATC specifications.
Manuals are needed for radio equipment exported to Israel for the first time.
AC 21-2B Appendix 2 10/2/69 Page 33 Any other information or documentation when specifically asked for.
3. EXPORT - FLYAWAY AIRCRAFT.
a. An aircraft which is being exported to Israel via flyaway should display Israeli nationality and registration marks and should carry the following documents on the delivery flight:
(1) Israeli Certificate of Registration.
(2) Israeli Certificate of Airworthiness or Delivery Flight Authorization.
(3) U.S. certificate of airworthiness for export (if applicable).
(4) Approved flight manual.
(5) Such other documents as may be essential to the safe operation of the aircraft.
b. The Government of Israel, Department of Civil Aviation, requests to be advised by telegram of the issuance of a certificate of airworthiness for export in respect of any aircraft which is to be exported to Israel via flyaway.
NOTE: It will be the responsibility of the Israeli purchaser to ensure that the identification markings are properly displayed upon the aircraft prior to departure from the exporter's base and to ensure that the necessary flight documents are installed and carried in the aircraft during the delivery flight.
Appendix 2 AC 21-2B Page 34 10/2/69
ITALY, REPUBLIC OF - SPECIAL REQUIREMENTS
1. In addition to the special requirements outlined below, all Class I, Il, and III products should be exported in accordance with the applicable provisions of Part 21 of the United States Federal Aviation Regulations, in order to be eligible for certification by the Government of Italy.
Export certificates of airworthiness and other related data should be forwarded to the toreign purchaser, inasmuch as the air authority of the Government of Italy (Registro Aeronautico Italiano) requires that the applicant (the foreign purchaser) shall submit to that Government such substantiating evidence as may be necessary to establish airworthiness and eligibility for registration and certification by that Government.
In addition to the foregoing, applicable parts of the following special requirements prescribed by the Republic of Italy will be complied with when exporting aircraft.
a. If the aircraft is the first! of a model exported to Italy, the following material shall be furnished with new aircraft:
(1) A copy of the type flight test report. Flight characteristics of the aircraft shall be described in this report in a manner convenient for calculating the performance of the aircraft over a reasonable range of weights, altitudes, and atmospheric conditions. Performance figures contained in, or furnished with, the type flight test report shall have been corrected to standard atmospheric conditions and a statement to this effect shall be made a part of the report. Established operational limitations, speeds, and approved loads shall be indicated.
(2) A copy of the manufacturer's production flight test report applying to the aircraft being operated, including a copy of the flight checkoff form utilized when testing the aircraft.
(3) A type record or stress analysis summary showing, for all members of the primary structure, their design loads, dimensions, materials, strength, and margins of safety, or a copy of the static strength test reports when type approval was granted on the basis of such tests. If the aircraft has been approved for ditching in its country of origin, appropriate substantiating data shall be submitted.
(4) A statement by an authorized representative of the manufacturer to the effect that all pertinent information, modification service bulletins, and revisions to such bulletins will be automatically distributed to the technical section of the air authority of the government of the country of destination.
1/ When in doubt as to whether an aircraft is the first of a model, contact the air authority of the importing country.
AC 21-2B Appendix 2 10/2/69 Page 35
(5) A catalog of spare parts relating to the aircraft, aircraft engine(s), propeller (s), and major auxiliary equipment installed.
(6) Three copies each of operating, maintenance, overhaul, and repair manuals applying to the aircraft, engine, propeller, or to equipment installed on the aircrait.
(7) A list of the necessary special tools and equipment (including a tolerance chart) essential to the inspection and servicing of the aircraft, engines, propellers, and associated equipment.
This should include inspection timetables, and appropriate charts and instructions relating to the installed systems.
(8) Three copies of information or instructions essential to the assembly and rigging of the aircraft.
(9) A list (in triplicate) of communication and navigation equipment installed by make and model, and operating instructions.
(a) In the case of an aircraft intended for IFR operation, a statement should be furnished to the effect that the communication and navigation equipment complies with TSO/ FAATC specifications.
(b) Manuals are needed for radio equipment exported to Italy for the first time.
b. In case an aircraft of the same model previously has been exported to and certificated in Italy, the following documents or material shall be furnished by the exporter or by the government of the country of origin:
(1) A certificate of airworthiness for export listing the propeller serial numbers, as well as the engine serial numbers.
(2) Three copies each of operating, maintenance, overhaul, and repair manuals or other related information, as provided for in la (8) above.
(3) A list of communication and navigation equipment inatalled by make and model, and operating instructions.
(a) In the case of an aircraft intended for IFR operation, a statement should be furnished to the effect that the communication and navigation equipment complies with TSO/FAATC specifications.
(b) Manuals are needed for radio equipment exported to Italy for the first time.
2. All communications with the Government of Italy shall be directed to:
Registro Aeronautico Italiano, Via del Tritone 169, Rome, italy
Appendix 2 AC 21-2B CHG 1 Page 36 11/13/70
JAPAN - SPECIAL REQUIREMENTS Aircraft and other Class I products to be eligible for certification by the Government of Japan should be covered by export certificates of airworthiness, as provided for in Part zl of the United States Federal Aviation Regulations. Class II and III products will be exported in accordance with procedures prescribed in the applicable provisions of * Part Ll of the United States Federal Aviation Regulations. Ixport * Certificates of airworthiness and other related data should be forwarded by the manufacturer or exporter to the Airworthiness Section, Technical Division, Civil Aviation Bureau, Ministry of Transport, No. 3, Godo- Chosha, 2-1-3, Kasumigaseki, Chiyoda-ku, Tokyo, Japan. This does not include data required to be carried in the aircraft in the case of flyaway delivery.
2. In addition to the foregoing, the following materials will be furnished with aircraft to be exported to Japan:
a. If the aircraft is the first of a model exported to Japan, the following materials will be furnished with aircraft:
(1) One copy each of parts catalog and operating, maintenance, overhaul, and repair manualsappiying to the aircraft, engines, propellers, and major equipment installed on aircraft.
(2) One copy of approved flight manual or data contained in the type flight test report including weight and balance report applicable to the particular aircraft.
(3) Certified aircraft, engines, and propellers logbooks or other equivalent historical records showing total operating time and time since last overhaul.
(4) Evidence of strength of primary structure as ascertained by physical tests and/or calculations.
(5) One copy of the current official aircraft, engine, and propeller specifications.
NOTE: The manufacturer or exporter will be advised by the purchaser on the basis of information furnished to the purchaser by the Civil Aviation Bureau of Japan when an aircraft is the first of a type or model to be imported into Japan.
In case an aircraft of the same model has been exported to, and certificated in Japan, the following materials will be furnished with aircraft:
AC 21-2B CHG 2 Appendix 2 8 Feb 71 Page 37
(1) One copy each of parts catalog and operating, maintenance, overhaul, and repair manuals appiying to the aircraft, engines, propellers, and major equipment installed on aircraft.
(2) One copy of approved flight manual or data contained in the type flight test report including weight and balance report applicable to the particular aircraft.
(3) Certified aircraft, engines, and propellers logbooks or other equivalent historical records showing total operating time and time since last overhaul.
3. If the aircraft is to be exported via flyaway to Japan without U.S.
nationality and marking, the manufacturer or exporter should display on the aircraft Japanese nationality and registration markings and should install in the aircraft Japanese certificate of registration and Japanese certificate of airworthiness. Upon application of the purchaser, Civil Aviation Bureau of Japan will issue nationality and registration markings, certificate of registration and certificate of airworthiness when the Japanese importer or the U.S. exporter furnishes Civil Aviation Bureau of Japan the following information:
a. Make and model of the aircraft.
b. Serial number of the aircraft.
c. Purchaser's name and address.
d. U.S. exporter's name and address.
e. Document which certifies transfer of ownership of the aircraft together with date of transfer.
f. Document which certifies airworthiness of the aircraft (Export * Certificate of Airworthiness, FAA Form 8130.4). If the certificate Itself 18 not available, submit its "p" number. *
4. After the Civil Aviation Bureau of Japan receives the foregoing application and information, the Japanese registration markings will be sent as soon as possible to the place where the aircraft is located and Japanese registration and airworthiness certificates will be delivered to the applicant. The applicant will then forward these certificates to the U.S. exporter for installation in the aircraft. After this, the aircraft may be flown from the U.S. to Japan.
Appendix 2 AC 21-2B Page 38 10/2/69
KOREA - SPECIAL REQUIREMENTS
1. To be eligible for certification by the Government of the Republic of Korea, all Class I, Il and III products should be issued export certificates of airworthiness or approvals in accordance with the provisions of Subpart L of Part 21 of the Federal Aviation Regulations.
2. Export certificates of airworthiness and other related data should be forwarded to the Korean purchaser, inasmuch as the Civil Aviation Authority of the Republic of Korea requires that the applicant (Korean purchaser) shall submit to the authority such substantiating evidence as may be necessary to establish airworthiness and eligibility for registration and certification by the Republic of Korea.
3. In addition to the foregoing, the following materials will be furnished for aircraft to be exported to Korea.
a. If the aircraft is the first model exported to Korea, the following material shall be furnished.
Three (3) copies of each parta catalog; operating, overhaul, maintenance (including maintenance schedule) and repair manuals applying to the aircraft, engines, propellers and major ancillary equipment installed on the aircraft, NOTE: If possible the documents specified in (1) shall be delivered well in advance of the intended delivery date for the aircraft.
(2) One copy each of approved flight manual and the manufacturer's production flight test report including the weight and balance report applicable to the aircraft.
(3) A certified copy of the complete drawing list.
(4) A type record or stress analysia summary showing, for all members of the primary structure, their design loads, dimensions, materials strength and margins of safety, or a copy of the static strength test reporta when type approval was granted on the basis of such teats.
(5) A statement by an authorized representative of the manufacturer modification, automatically distributed to the Civil Aviation Authority of the Republic of Korea.
GP 0 904-282
AC 21-2B Appendix 2 10/2/69 Page 37
(1) One copy each of parts catalog and operating, maintenance, overhaul, and repair manuals applying to the aircraft, engines, propellers, and major equipment installed on aircraft.
One copy of approved flight manual or data contained in the type flight test report including weight and balance report applicable to the particular aircraft.
Certified aircraft, engines, and propellers logbooks or other equivalent historical records showing total operating time and time since last overhaul.
3. If the aircraft is to be exported via flyaway to Japan without U.S.
nationality and marking, the manuracturer or exporter should dispiay on che aircraft Japanese nationality and registration markings and should install in the aircraft Japanese certificate of registration and Japanese certificate of airworthiness. Upon application of the purchaser, Civil Aviation Bureau of Japan will issue nationality and registration markings, certificate of registration and certificate of airworthiness when the Japanese importer or the U.S. exporter furnishes Civil Aviation Bureau of Japan the following information:
a. Make and model of the aircraft.
b. Serial number of the aircraft.
c. Purchaser's name and address.
d. U.S. exporter's name and address.
e. Document which certifies transfer of ownership of the aircraft together with date of transfer.
f. Document which certifies airworthiness of the aircraft (Export submit its "E" number. Certificate of Airworthiness, FAA Form 8130-4 itself is not available,
4. After the Civil Aviation Bureau of Japan receives the foregoing application and information, the Japanese registration markings will be sent as soon as possible to the place where the aircraft is located and Japanese registration and airworthiness certificates will be delivered to the applicant. The applicant will then forward these certificates to the U.S. exporter for installation in the aircraft. After this, the
Appendix 2 AC 21-2B Page 38 10/2/69
KOREA - SPECIAL REQUIREMENTS
1. To be eligible for certification by the Government of the Republic of Korea, all Class 1, Il and Ill products should be issued export certificates of airworthiness or approvals in accordance with the provisions
2. Export certificates of airworthiness and other related data should be forwarded to the Korean purchaser, inasmuch as the Civil Aviation Authority of the Republic of Korea requires that the applicant (Korean purchaser) shall submit to the authority such substantiating evidence as may be necessary to establish airworthiness and eligibility for registration and certification by the Republic of Korea.
3. In addition to the foregoing, the following materials will be furnished for aircraft to be exported to Korea.
a. If the aircraft is the first model exported to Korea, the following material shall be furnished.
Three (3) copies of each parts catalog; operating, overhaul, maintenance (including maintenance schedule) and repair to the ai treet, e manuals applying to the aircrait, engines, propellers and major ancillary equipment installed on the aircraft, NOTE: If possible the documents specified in (1) shall be delivered well in advance of the intended delivery date for the aircraft.
(2) One copy each of approved flight manual and the manufacturer's production flight test report including the weight and balance report applicable to the aircraft.
(3) A certified copy of the complete drawing list.
(4) A type record or stress analysis summary showing, for all members of the primary structure, their design loads, dimensions, materials strength and margins of safety, or a copy of the static strength test reports when type approval was granted on the basis of such tests.
(5) A statement by an authorized representative of the manufacturer to the effect that all pertinent information, modification, service bulletins and revisions to such bulletins will be automatically distributed to the Civil Aviation Authority of the Republic of Korea.
AC 21-2B Appendix 2 10/2/69 Page 39
(6) Radio and electrical installation data books showing wiring diagrams.
(7) One copy of the current official aircraft, engine, and propeller specifications, and certificated logbooks or other equivalent historical records.
b. In case an aircraft of the same model has been exported to, and certified in Korea, the following documents or material will be furnished by the exporter.
(1) One copy each of parts catalog; operating, maintenance (including maintenance schedule), overhaul and repair manuals appiying to the aircraft, engines, propellers and major ancillary equipment installed on the aircraft.
(?) One copy of approved flight manual and manufacturer's flight test report including weight and balance report applicable to the particular aircraft.
(3) Certificated aircraft, engine and propeller logbooks or other equivalent historical records.
c_ If delivery of an aircraft is via flyaway to Korea without U. S.
nationality and registration marks, the aircraft shall, display Korean nationality and registration marks and carry certificates of airworthiness and registration issued by the Civil Aviation Authority of the Republic of Korea. All inquiries relating to the issuance of Korean certificate of registration and certificate of airworthiness should be addressed to the Director, Civil Aviation Bureau, Ministry of Transportation, Republic of Korea, Seoul, Korea.
Appendix 2 AC 21-2B Page 40 10/2/69
MALAYSIA, WEST - SPECIAL REQUIREMENTS
1. To be eligible for export to West Malaysia, an aircraft must meet the requirements prescribed in Federal Aviation Regulations Part 21, Subpart L.
2. The applicant for certification of the aircraft in West Malaysia must provide the following documents to the Department of Civil Aviation, 3rd Floor, 4th Block, Government Offices, Young Road, Kuala Lumpur, West Malaysia:
a. For each aircraft:
(1) F.A.A. Export Certificate of Airworthiness.
NOTE: It will be necessary for this to be supplied in advance of the aircraft delivery date, so that the Malaysian Certificate of Validation may be issued and accompany the aircraft during training flying and delivery flight.
(2) Weight and balance report.
(3) Equipment List.
(4) Modification statement and List of F.A.A. Airworthiness Directives complied with.
(5) Copy of Production Flight Test Report related to the specific aircraft.
b. For each model aircraft, one copy of:
(1) F.A.A. approved flight manual.
(2) Weight and balance manual.
(3) Operating manual.
(4) Maintenance Planning Data.
(5) Maintenance Manual (Airframe).
(6) Maintenance Manual (Engine).
(7) Overhaul Manual (Airframe).
(8) Overhaul Manual (Engine).
AC 21-2B Appendix 2 10/2/69 Page 41
(9) Structural Repair Manual.
(10) Complete set of Service Bulletins (Airframe).
(11) Complete set of Service Bulletins (Engine).
(12) F.AA. Aircraft Data Sheet.
(13) F.A.A. Engine Data Sheet.
Amendment service for the above documents must be provided as applicable.