Appendix C C .5.3 Application Submissions. Applic ations submitted for authorization to conduct ADS-B In operations should address the following:
1.
Identify the person(s) responsible for ensuring ADS-B In maintenance and inspection personnel are properly trained, knowledgeable, and current in accordance with the GMM.
2. Identify how the ADS-B In training will be conducted (i.e., in-house or outside training provider).
3. Include policy and procedures that address any qualifications for ADS-B In maintenance and inspection personnel.
4. Identify the methods and techniques used to conduct initial and recurrent training
(e.g., instructor-led training (ILT), computer-based training (CBT), and on-the-job training (OJT)).
5. Identify the procedures used to record and maintain initial and recurrent ADS-B In training and qualifications.
6. Include maintenance and inspection training curriculum that addresses the following ADS-B In topics:
• Operational overview;
• Aircraft system overview;
• Maintenance and inspection procedures;
• Personnel training qualifications (as applicable);
• MEL procedures;
• Test equipment and use (as applicable); and
• Return to service test procedures.
C-2
Appendix D APPENDIX D. DEFINITIONS The terms have the following meaning when used in this advisory circular (AC):
D.1 Automatic Dependent Surveillance-Broadcast (ADS-B). ADS-B is a function on an aircraft or vehicle that periodically broadcasts its state vector (i.e., horizontal and vertical position, horizontal and vertical velocity) and other information.
D.2 Automatic Dependent Surveillance-Broadcast (ADS-B) Airspace. The airspace specified in 14 CFR part 91, § 91.225.
D.3 Automatic Dependent Surveillance-Broadcast (ADS-B) Guidance Display (AGD).
The AGD provides digital readouts and alerts of time-sensitive information located on the Cockpit Display of Traffic Information (CDTI). This is used primarily for installations where the CDTI is not installed in the forward field of view (FOV).
D.4 Automatic Dependent Surveillance-Broadcast (ADS-B) In. ADS-B In is the receipt, processing, and display of ADS-B transmissions. ADS-B In is necessary to utilize ADS-B traffic and broadcast services (e.g., Flight Information Service-Broadcast (FIS-B) and Traffic Information Service-Broadcast (TIS-B)).
D.5 Automatic Dependent Surveillance-Broadcast (ADS-B) Out. Transmission of an aircraft’s position, altitude, velocity, and other information to other aircraft and air traffic control (ATC) ground-based surveillance systems.
D.6 Automatic Dependent Surveillance-Rebroadcast (ADS-R). ADS-R is a link-translation and rebroadcast function of the ADS-B ground system that allows both ADS-B frequencies (1090 Extended Squitter (ES) and 978 megahertz (MHz)) to share information.
D.7 Cockpit Display of Traffic Information (CDTI). This is a generic display that provides the flightcrew with surveillance information about other aircraft, including position.
Traffic information may be obtained from one or multiple sources, including ADS-B, Traffic Alert and Collision Avoidance System (TCAS), and TIS-B. The display of information may be hosted on an Electronic Flight Bag (EFB) or the aircraft’s integrated avionics suite.
D.8 Cockpit Display of Traffic Information (CDTI) Assisted Visual Separation (CAVS).
CAVS is an ADS-B In application that assists the flightcrew in maintaining visual separation from ADS-B Out-equipped aircraft.
D.9 Extended Squitter (ES). ES is how ADS-B messages are transmitted from a Mode Select (Mode S) transponder. ES is a long message (e.g., format DF=17) that Mode S transponders transmit automatically, without interrogation by radar, to announce the own-ship aircraft’s presence to nearby ADS-B-equipped aircraft and ground stations.
D.10 Flight Information Service-Broadcast (FIS-B). FIS-B is a ground broadcast service provided over the 978 MHz frequency Universal Access Transceiver (UAT) data link.
D -1
Appendix D The FAA FIS-B system provides pilots and flightcrews of properly equipped aircraft (ADS-B In) with a flight deck display of certain aviation weather and aeronautical information for advisory-only use.
D.11 Flightcrew. One or more flight deck crewmembers required for the operation of the aircraft.
D.12 Global Navigation Satellite System (GNSS). The generic term for a satellite navigation system, such as the Global Positioning System (GPS), that provides autonomous worldwide geospatial positioning and may include local or regional augmentations.
D.13 Global Positioning System (GPS). GPS is a U.S. satellite-based radio navigation system that provides a global positioning service. The service provided by GPS for civil use is defined in the GPS Standard Positioning System (SPS) Performance Standard.
D.14 International Civil Aviation Organization (ICAO). A United Nations organization that is responsible for developing international standards and for recommending practices and procedures covering a variety of technical fields of aviation.
D.15 International Civil Aviation Organization (ICAO) 24-Bit Address (Mode S Code).
Address (octal format) assigned to each aircraft transponder or ADS-B transmitter during registration or change of registration. The correct address is required, pursuant to § 91.227(d)(11), to be transmitted by both the installed transponder(s) and the ADS-B Out system (1090ES/UAT). For aircraft equipped with Mode S transponders, their replies to TCAS to enable proper operation of TCAS avionics and ATC ground systems interrogations and their ADS-B transmissions should use the same 24-bit address, allowing correlations by Airborne Surveillance and Separation Assurance Processing (ASSAP).
D.16 In-T rail Procedures (ITP). ITP are designed primarily for use in nonradar oceanic airspace to enable appropriately equipped ADS-B In aircraft to perform flight level (FL) changes previously unavailable with procedural separation minima applied.
D.17 Mode A. One of a possible 4,096 identification codes that are transmitted from an aircraft transponder or ADS-B transmitter to ground-based radars or ADS-B ground stations.
Secondary radars interrogate the aircraft transponder for the Mode A code. In ADS-B, the aircraft includes its Mode A code as part of a transmitted ADS-B message. The Mode A code is also known as the squawk code for the aircraft. The Mode A (military Mode 3) is used in ATC for associating flight plans (FP) with surveillance data.
D.18 Mode C. The encoded barometric altitude from an onboard pressure sensor is contained in the Mode C. This altitude information is transmitted by the aircraft transponder in response to an appropriate interrogation from a secondary radar system. The Mode C is used by ATC to determine the altitude of the reporting aircraft.
D.19 Mode S. A Secondary Surveillance Radar (SSR) system that operates using addressed interrogation on 1030 MHz, and the transponder replies on 1090 MHz. Mode S systems interrogate for aircraft identity (Mode A), altitude (Mode C), and other aircraft-specific D -2
Appendix D information. The aircraft transponder replies with the requested information. Mode S supports a two-way frequency and an ADS-B service known as ES.
D.20 Non-Performing Equipment (NPE). ADS-B Out-equipped aircraft operating contrary to § 91.225 and/or § 91.227.
D.21 Position Source. The onboard avionics equipment that provides the latitude, longitude, geometric altitude, velocity, position and velocity accuracy metrics, and position integrity metric to the ADS-B transmitter. Additionally, the position source may provide the vertical rate parameters. Currently, only GPS, GPS with wide area augmentation systems (WAAS), and Aircraft-Based Augmentation System (ABAS) sensors tightly integrated with GPS are approved as position sources.
D.22 Secondary Surveillance Radar (SSR). A radar sensor that listens to replies sent by transponders carried on onboard airborne targets. SSR sensors, in contrast to Primary Surveillance Radar (PSR) sensors, require the aircraft under surveillance to carry a transponder.
D.23 Statement of Compliance. The statement of compliance is a manufacturer-generated document that states the ADS-B equipment, when installed in accordance with the installation instructions, complies with all requirements of § 91.227, and with the performance requirements of the appropriate Technical Standard Order (TSO).
D.24 Surveillance. Detection, tracking, characterization, and observation of aircraft, other vehicles, weather, and airspace status information and phenomena for the purposes of conducting flight operations in a safe and efficient manner. The primary purposes of traffic surveillance (as distinct from all surveillance functionality) are to control the flow of aircraft, to provide situational awareness for pilots and controllers, and to separate aircraft.
D.25 Traffic Information Service-Broadcast (TIS-B). TIS-B is a ground broadcast service provided from an ADS-B ground system network over the UAT and 1090ES links that provides position, velocity, and other information on traffic that is detected by airport surface detection equipment (ASDE), SSR, or Wide Area Multilateration (WAM), but that is not transmitting an ADS-B position. TIS-B service will always be deployed with the ADS-R service so that a complete traffic picture is provided for both non-equipped and alternate-link-equipped aircraft.
D.26 Transponder. The airborne radar beacon receiver/transmitter portion of the ATC radar beacon system (ATCRBS) or Mode S that automatically receives radio signals from interrogators on the ground and selectively replies with a specific reply pulse or pulse group only to those interrogations being received on the mode to which it is set to respond.
D.27 Universal Access Transceiver (UAT). UAT is a wideband multipurpose data link intended to operate globally on a single channel with a channel signaling rate of just over D-3
Appendix D 1 megabit per second (Mbps). By design, UAT supports multiple broadcast services, including FIS-B and TIS-B, in addition to ADS-B.
D.28 Visual Meteorological Conditions (VMC). Weather conditions in which pilots have sufficient visibility to fly the aircraft while maintaining visual separation from terrain and other aircraft. The exact requirements vary by class of airspace (e.g., Class B airspace:
3 statute miles (sm) visibility, clear of clouds).
D-4
Appendix E APPENDIX E. RELATED REGULATIONS AND READING MATERIAL E.1 Related Title 14 of the Code of Federal Regulations (14 CFR) Parts. You can find the Code of Federal Regulations (CFR) online at https://www.ecfr.gov.
1. Part 1, § 1.1, General Definitions.
2. Part 21, § 21.50, Instructions for Continued A irworthiness and Manufacturer’s Maintenance Manuals Having Airworthiness Limitations Sections.
3. Part 61, Certification: Pilots, Flight Instructors, and Ground Instructors.
4. Part 91, General Operating and Flight Rules:
• Section 91.1, Applicability;
• Section 91.103, Preflight Action;
• Section 91.130, Operations in Class C Airspace;
• Section 91.131, Operations in Class B Airspace;
• Section 91.135, Operations in Class A Airspace;
• Section 91.217, Data Correspondence Between Automatically Reported Pressure Altitude Data and the Pilot’s Altitude Reference;
• Section 91.225, Automatic Dependent Surveillance-Bro adcast (ADS-B) Out Equipment and Use (refer to Registry Identification Number (RIN) 2120-AI92, Automatic Dependent Surveillance-Broadcast (ADS-B) Equipage Mandate to Support Air Traffic Control Service);
• Section 91.227, Automatic Dependent Surveillance-Bro adcast (ADS-B) Out Equipment Performance Requirements (refer to RIN 2120-AI92); and
• Subpart K ( Part 91K), Fractional Ownership Operations.
5. Part 121, Operating Requirements: Domestic, Flag, and Supplemental Operations.
6. Part 125, Certification and Operations: Airplanes Having a Seating Capacity of 20 or More Passengers or a Maximum Payload Capacity of 6,000 Pounds or More; and Rules Governing Persons On Board Such Aircraft.
7. Part 133, Rotorcraft External-Load Operations.
8. Part 135, Operating Requirements: Commuter and On Demand Operations and Rules Governing Persons On Board Such Aircraft.
9. Part 137, Agricultural Aircraft Operations.
E -1
Appendix E E.2 Related Reading Materials (current editions).
• You can find this and other advisory circulars (AC) on the FAA’s website at https://www.faa.gov/regulations_policies/advisory_circulars or on the Dynamic Regulatory System (DRS) at https://drs.faa.gov.
• Inspectors and air carriers can access FAA Order 8900.1 on DRS. Operators and the public can find this order on the FAA’s website at https://www.faa.gov/regulations_p olicies/orders_notices and DRS.
• You can find a current list of Technical Standard Orders (TSO) on DRS.
E.2.1 F AA Guidance Material.
1. AC 20-165, Airworthiness Approval of Automatic Dependent Surveillance-B roadcast OUT Systems.
2. AC 20-172, Airworthiness Approval for ADS-B In Systems and Applications.
3. Order 8900.1, Volume 3, Chapter 18, Section 3, OpSpec/MSpec/LOA A354, Automatic Dependent Surveillance-Broadcast (ADS-B) In-Trail Procedure (ITP).
4. A eronautical Information Manual (AIM ), paragraphs 4-5-7 through 4-5-10 .
5. Surveillance and Broadcast Services Description Document, SRT-047 (current revision).
E.2.2 F AA TSOs (edition listed below or later).
1. TSO-C112d, Air Traffic Control Radar Beacon System/Mode Select (ATCRBS/Mode S) Airborne Equipment.
2. TSO-C129a, Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS).
3. TSO-C145c, Airborne Navigation Sensors Using the Global Positioning System Augmented by the Satellite Based Augmentation System (SBAS).
4. TSO-C146c, Stand-Alone Airborne Navigation Equipment Using the Global Positioning System Augmented by the Satellite Based Augmentation System (SBAS).
5. TSO-C154c, Universal Access Transceiver (UAT) Automatic Dependent Surveillance-Broadcast (ADS-B) Equipment Operating on Frequency of 978 MHz.
6. TSO-C157a, Aircraft Flight Information Services-Broadcast (FIS-B) Data Link Systems and Equipment.
7. TSO-C166b, Extended Squitter Automatic Dependent Surveillance-Broadcast (ADS-B) and Traffic Information Service-Broadcast (TIS-B) Equipment Operating on the Radio Frequency of 1090 Megahertz (MHz).
E -2
Appendix E
8. TSO-C195, Avionics Supporting Automatic Dependent Surveillance-Broadcast (ADS-B) Aircraft Surveillance Applications (ASA).
9. TSO-C196a, Airborne Supplemental Navigation Sensors for Global Positioning System Equipment using Aircraft-Based Augmentation.
E.2.3 RTCA, Inc. Documents.
1. RTCA DO-260B, Minimum Operational Performance Standards for 1090 MHz Extended Squitter Automatic Dependent Surveillance - Broadcast (ADS-B) and Traffic Information Services - Broadcast (TIS-B).
2. RTCA DO- 282, Minimum Operational Performance Standards for Universal Access Transceiver (UAT) Automatic Dependent Surveillance - Broadcast (ADS-B).
3. RTCA DO- 312 Supplement, Safety, Performance and Interoperability Requirements Document for the In Trail Procedure in Oceanic Airspace (ATSA-ITP) Application.
4. RTCA DO- 317B, Minimum Operational Performance Standards (MOPS) for Aircraft Surveillance Applications (ASA) System.
5. RTCA DO- 354, Safety and Performance Requirements Document for CDTI Assisted Visual Separation (CAVS).
E.3 European Un ion Aviation Safety Agency (EASA) Publications (current editions).
1. EASA Acceptable Means of Compliance (AMC) 20-24, Certification Considerations for the Enhanced ATS in Non-Radar Areas using ADS-B Surveillance (ADS-B-NRA) Application via 1090 MHz Extended Squitter.
2. EASA Certification Specifications and Acceptable Means of Compliance Airborne Communications, Navigation and Surveillance (CS-ACNS).
E-3
Appendix F APPENDIX F. INTERVAL MANAGEMENT (IM)
CONTENTS Paragraph Page
F.1 PurposeF-3
F.2 BackgroundF-3
F.3 IM DescriptionF-3
F.3.1 IM Description – Ground ComponentF-3
F.3.2 IM Description – Airborne ComponentF-3
F.3.3 Notional PhraseologyF-4
F.3.4 Early FIM AvionicsF-4
F.4 IM TerminologyF-4
F.4.1 Assigned Spacing Goal (ASG)F-4
F.4.2 Cross Point (CP)F-4
F.4.3 Designated TrafficF-4
F.4.4 Flight-deck Interval Management (FIM) AvionicsF-4
F.4.5 Flight Identification (FLT ID)F-5
F.4.6 IM AircraftF-5
F.4.7 IM Clearance TypeF-5
F.4.8 IM Path MonitoringF-5
F.4.9 IM SpeedF-5
F.4.10 IM Speed Compliance MonitoringF-5
F.4.11 Planned Cancellation Point (PCP)F-5
F.4.12 Selected TrafficF-5
F.5 IM Clearance Types DescribedF-5
F.5.1 Clearance Type FormatF-5
F.5.2 Maintain Current SpacingF-6
F.5.3 Capture Then MaintainF-7
F.5.4 Achieve-by Then Maintain (“Cross”)F-7
F.5.5 Final Approach SpacingF-8
F.5.6 IM SuspendF-8
F.5.7 S afeRoute+ DifferencesF-8
F.5.7.1 Maintain Current Spacing and Capture Then MaintainF-8
F- 1
Appendix F
F.5.7.2 Achieve- by Then MaintainF-8
F.5.7.3 No IM SuspendF-8
F.6 IM ProcedureF-9
F.6.1 AT
C Identifi es IM PairF-9
F.6.2 ATC Checks FeasibilityF-9
F.6.3 ATC Issues IM ClearanceF-9
F.6.4 IM Flightcrew Reads Back ClearanceF-9
F.6.5 IM
Flightcrew Verifies Lead AircraftF-9
F.6.5.1 FLT ID VerificationF-10
F.6.6 FIM Avionics Internal CheckF-10
F.6.7 IM Flightcrew Evaluates IM SpeedF-10
F.6.7.1 Rejected ClearanceF-10
F.6.7.2 Accepted ClearanceF-10
F.6.8 IM Flightcrew Flies IM SpeedsF-10
F.6.8.1 C
ompliance With IM SpeedsF-10
F.6.8.2 Mandatory Published SpeedsF-11
F.6.8.3 Compliance With Oper ational or Regulatory Speed RestrictionsF-11
F.6.9 IM CancellationF-11
F.7 Off-Nominal SituationsF-11
F.8 IM Flight PlanningF-11
F.8.1 IM Outs ide the U.S. NASF-12
F.8.2 Flight Plan CodesF-12
F.9 Authorization to Conduct IMF-12
F.9.1 In
itial Request for AuthorizationF-12
F.9.2 Documentation to Submit With Formal RequestF-12
F.9.2.1 Request LetterF-12
F.9.2.2 Airplane Flight Manual (AFM) Compliance DocumentationF-13
F.9.2.3 Operation Manuals and ChecklistsF-13
F.9.2.4 Maint enance DocumentationF-13
F.9.2.5 Revision of Minimum Equipment List (MEL)F-13
F.9.2.6 Pilot TrainingF-13
F.9.2.7 Dispatch/Flight Follower TrainingF-14
F -2
Appendix F F.1 Purpose. This appendix describes Interval Management (IM) and provides guidance to operators seeking FAA authorization to conduct IM operations.
F.2 Background. The busiest airports operate most efficiently when air traffic control (ATC) delivers the arriving aircraft in a well-spaced sequence within an appropriate interval.
The benefits of this spacing may include reduced fuel burn, reduced emissions, reduced noise, reduced ATC transmissions, and, as applied to the National Airspace System (NAS), greater throughput and reduced delays. IM is a set of procedures and capabilities designed to provide precise aircraft-to-aircraft spacing, and is suitable for use en route, on a terminal arrival, and final approach. It is an ADS-B In application that takes advantage of NAS-wide presence of ADS-B Out-equipped aircraft.
F.3 IM Description. IM has a ground component and an airborne component. On the ground, ATC uses automation support tools to identify candidate pairs of IM aircraft and develop an IM clearance. The flight deck component, called Flight-deck Interval Management (FIM) avionics, consists of equipment that provides IM speeds to be flown by the flightcrew based on the information provided in the ATC clearance. The purpose of the IM clearance is to establish and maintain a precise spacing between a lead ADS-B Out aircraft and a trail IM aircraft. The IM speeds provided by the FIM avionics are expected to be flown as if each one were an individual ATC speed instruction for the duration of the IM procedure. The flightcrew complies with the ATC IM clearance by flying the IM speeds. ATC continues to retain responsibility for safe separation between the lead ADS-B Out aircraft and the trail IM aircraft, as well as all other aircraft.
Note: Some may describe the IM aircraft as “following” a lead aircraft. The IM aircraft does not actually follow the lead aircraft but rather spaces from it in time or distance. At all times, each aircraft is navigating independently, as in non-IM operations. There are IM scenarios where the lead aircraft and IM aircraft are on different navigation routes and can be at different altitudes.
F.3.1 IM Description – Ground Component. ATC initiates an IM operation when it is determined to be operationally beneficial. ATC, in conjunction with the IM automation support tool, identifies a candidate pair of aircraft consisting of a lead ADS-B Out aircraft and a FIM-equipped IM aircraft. The tool also calculates a desired spacing, called the assigned spacing goal (ASG). Based on when ATC needs the ASG, the controller can choose one of the IM clearance types (covered in paragraph F.5).
F.3.2 IM Description – Airborne Component. IM is just one application that can be installed in approved ADS-B In avionics as described in Chapter 2, Overview and System Description, paragraph 2.4.1, and meets the performance requirements of Technical Standard Order (TSO)-C195c, Avionics Supporting Automatic Dependent Surveillance – Broadcast (ADS-B) Aircraft Surveillance Applications (ASA). As with other ADS-B In applications, FIM avionics consists of the Cockpit Display of Traffic Information (CDTI) and application-specific software. The CDTI consists of an input device for the IM clearance elements, a traffic display, and a means to display the IM speeds and provide FIM-specific indications and alerting. A speed algorithm calculates F- 3
Appendix F the IM speed: the indicated airspeed (IAS) or Mach number the flightcrew flies to achieve or maintain the ASG. Calculation of the IM speed is based on a number of variables including the along-path distance between the two aircraft, their groundspeeds (GS), and the forecast winds and temperatures entered into the FIM avionics or other flight deck systems. The algorithm will limit calculated IM speeds to prevent overly large speed changes and exceeding certain aircraft, regulatory, or procedural limitations.
Precise spacing requires that the algorithm use a defined horizontal and vertical path for both aircraft. Therefore, either both aircraft must be on the same horizontal, or near parallel route, or the lead aircraft’s navigation clearance1 must be provided to the FIM avionics. The FIM avionics monitors for horizontal path conformance of both the lead and IM aircraft and IM speed compliance. The avionics will provide appropriate indications to the flightcrew if any path conformance or speed compliance issues arise.
1 The lead aircraft’s navigation clearance may be provided as a named route or a sequence of waypoints. “Same route” may be used to indicate when the lead aircraft will be on the same route as the IM aircraft.
F .3.3 Notional Phraseology. IM has been developed through years of extensive study, simulation, and limited operational trials. However, at this writing the situations in which ATC may use IM, and the actual phraseology, are still evolving. Therefore, we use notional phraseology in this appendix to explain the IM procedure. We will add approved phraseology to subsequent revisions of this guidance.
F.3.4 Early FIM Avion ics. The early versions of FIM avionics may have only a subset of the full IM capabilities described in the avionics standards. This AC will identify any differences. As later versions of FIM avionics are produced that meet the full set of capabilities described in the avionics standards, we will revise this AC to reflect the added functionality. Additionally, equipment terminology may evolve as new FIM avionics designs are fielded. We will use terminology from the avionics standards in this AC.
F.4 IM Terminology. W e use the following terminology in this appendix.
F.4.1 Assigned Spacing Goal (ASG). T he time or distance interval between the IM aircraft and lead aircraft assigned by ATC in the IM clearance. The ASG includes both a value and unit of dimension as time or distance.
F.4.2 Cross Point (CP). A point on the IM aircraft’s planned flight path where the ASG is intended to be met. Also referred to as the “Achieve-by” point in industry standards.
F.4.3 Designated Traffic . Traffic designated in the CDTI as the lead aircraft for a specific ADS-B In application. The FIM avionics will make designated traffic distinguishable from all other traffic on the traffic display.
F.4.4 Flight-deck Interval Management (FIM) Avionics. FIM avionics refers to the avionics that provide the IM capabilities defined in this AC. The FIM avionics act as the flightcrew interface and provide features like the IM clearance input interface and the display of IM speeds and any indications or alerts.
F-4