Figure 11-2. NEF Item Selection Criteria Elements Flowchart
1. Documentation: Discrepancy Noted in Logbook Defer in Accordance With → YES 2. Current NEF Item?
the Operator's NEF Program NO Follow MMEL/CDL/MEL YES 3. MMEL/CDL/MEL Procedures Item?
NO May NOT be Deferred in Accordance With NEF YES 4. MMEL, CDL, MEL Program Jtem Subcomponent?
NO May NOT be Deferred in 5. Required Accordance With NEF YES for Cert or Op Program Rules?
NO Repair the Item YES 6. Safety-of-Flight Prior to Flight Issue?
• NO, Unknown or N/A
7. ID Source Repair the Item NO (Underlying Prior to Flight Cause)?
YES or N/A Defer in
8. Effects an Accordance Repair the Item YES Equivalent Level of With the Prior to Flight Safety? Operator's NEF Program Uncertain
9. Isolated (1) YES, Repair the Item • NO w/ Applicable Reevaluate Prior to Flight Maintenance Procedures
(2) YES, Passed
• Reevaluation
10. Defer in Accordance With the → 11. Update NEF List as Required Operator's NEF Program 11-7
12-1 CHAPTER 12. CONFIGURATION DEVIATION LIST (CDL)
12.1 Purpose of the CDL. The CDL is a list of externally exposed nonstructural aircraft parts that may be missing and is tailored for each model aircraft. The CDL evolved over several years from what was commonly known as a “missing parts list,” which was a list of nonstructural external parts of an aircraft that were found missing after flight. The missing parts list is known today as the CDL. A CDL allows continued operation with missing externally exposed nonstructural parts by defining restrictions, limitations, or performance penalties, while the aircraft remains airworthy.
12.2 Development. The aircraft manufacturer develops a CDL during the initial certification process. This is not a requirement for aircraft certification. The manufacturer makes the decision to develop or not to develop a CDL. The responsible Aircraft Certification Service office has final approval of all FAA-approved CDLs and all requests for revisions to an FAA-approved CDL.
12.2.1 Which Aircraft Has a CDL. A CDL is developed for most U.S.-built transport category 14 CFR part 25 aircraft and many part 23 aircraft by aircraft manufacturers during the initial certification process. However, they are not a required element for aircraft certification. The manufacturer makes the decision to develop or not to develop a CDL. If deemed necessary, the aircraft manufacturer develops a proposed CDL and coordinates submission with the responsible Aircraft Certification Service office and the AED. The responsible Aircraft Certification Service office and the AED review, evaluate, and may conduct or oversee any required testing and data collection necessary to approve proposed CDL items. Approval of a CDL is by the responsible Aircraft Certification Service office or through an OEM Organization Designation Authorization (ODA) program.
12.2.2 U. S. -Manufactured Aircraft. For U.S.-manufactured aircraft, an FAA-approved CDL is either:
• Incorporated into the limitations section of the AFM,
• Published as an appendix to the AFM, or
• Published as a supplement to the AFM.
12.2.3 Aircraft Manufactured Outside the United States. The CDL may be a standalone document that is part of the SRM or another manufacturer’s document.
12.3 CDL Versus MEL. An MEL and a CDL are separate documents. An MEL is approved by the responsible Flight Standards office. A CDL is approved by the responsible Aircraft Certification Service office, or through an OEM’s ODA program. An MEL and a CDL may be kept in the same binder but will be clearly partitioned as two separate “standalone” documents. If an operator desires an amendment to the CDL, the request should be made to the responsible Aircraft Certification Service office, or directly to the aircraft manufacturer.
12-2
12.4 CDL Management Program. Operators will ensure they comply with all penalties, limitations, and restrictions associated with a CDL. An operator may develop procedures more restrictive than the CDL. An operator is not required to have a CDL management program. If an operator chooses to develop a CDL management program, they are not required to submit it to the FAA, and the FAA is not required to review it.
Advisory Circular Feedback Form If you find an error in this AC, have recommendations for improving it, or have suggestions for new items/subjects to be added, you may let us know by contacting the General Aviation and Commercial Division at 9-AFS-800-Correspondence@faa.gov or the Flight Standards Directives Management Officer at 9-AWA-AFB-120-Directives@faa.gov.
Subject: AC 91-67A, Minimum Equipment Requirements for General Aviation Operations Under 14 CFR Part 91, § 91.213 Date: _____________________ Please check all appropriate line items:
An error (procedural or typographical) has been noted in paragraph ____________ on page _______.
R ecommend paragraph _____________ on page __________ be changed as follows:
______________________________________________________________________ ______________________________________________________________________ In a future change to this AC, please cover the following subject:
(Briefly describe what you want added.)
______________________________________________________________________ ______________________________________________________________________ Other comments:
______________________________________________________________________ ______________________________________________________________________ I would like to discuss the above. Please contact me.
Submitted by: Date: ______________________