NTSB investigations, 2018, CA
6 cases where the sequence of events included Aircraft maintenance event.
Cases per year
| 2008 | 6 |
|---|---|
| 2009 | 3 |
| 2010 | 4 |
| 2011 | 3 |
| 2012 | 1 |
| 2013 | 2 |
| 2014 | 1 |
| 2016 | 3 |
| 2017 | 3 |
| 2018 | 6 |
| 2020 | 1 |
| 2023 | 2 |
| 2024 | 1 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE year(c.\"eventDate\") = 2018
AND c.\"eventStateOrRegion\" = 'CA' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT s.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s.\"tier2Number\" = '040' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE \"isDefiningEvent\"))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE year(c."eventDate") = 2018 AND c."eventStateOrRegion" = 'CA' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT s.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' s WHERE s."tier2Number" = '040' AND s.case_mkey IN (SELECT case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_events.parquet' WHERE "isDefiningEvent")) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB WPR18LA265Accident · No injuriesClass 3 · LimitedFinal reportSchweizer 300CBi 269C1 · Granada Hills, CAA partial loss of engine power that was the result of a loss of compression in the No. 1 and 4 cylinders due to damage and material separation from the exhaust valve heads, which resulted in a subsequent forced, hard landing. Contributing to the accident was…NTSB WPR18TA223Accident · No injuriesFinal reportZenair Zenith Stol CH750 · Napa, CAThe pilot's use of fuel below the required octane rating, which caused engine detonation and damage and subsequently led to oil exhaustion and a total loss of engine power in flight. Contributing to the accident was the pilot's inadequate service/maintenance…NTSB WPR18FA171Accident · 2 fatalClass 2 · FieldFinal reportBeech A35 · Hesperia, CAThe pilot's failure to maintain airplane control during an attempted return to the airport following the separation of the spinner bulkhead during takeoff as a result of fatigue cracking. Contributing to the accident was the pilot's improper decision to fly…NTSB ANC18LA043Accident · No injuriesClass 3 · LimitedFinal reportCessna 210 · Ramona, CAThe failure of the engine-driven hydraulic pump due to the installation of improper cap screws, which resulted in a gap in the pump housing, a subsequent hydraulic leak, and the landing gear collapsing.NTSB WPR18FA143Accident · 1 fatalField investigationFinal reportI.C.A.-Brasov IS 29D · Avenal, CAThe pilot's improper installation of the wings onto the glider, which resulted in an in-flight wing separation. Contributing to the accident were the pilot's limited familiarity with the design and a lack of reliable assembly guidance.NTSB WPR18FA088Accident · 4 fatalField investigationFinal reportHastings Thomas G Cirrus VK 30 · Agua Dulce, CAThe driveshaft fracture due to overstress loading and rotational bending as a result of the under-torqued nuts on the elastomeric couplings backing off and the subsequent in-flight separation of the horizontal fairing due to contact with the separated end of…