Fatal NTSB investigations: Lycoming HI0-360 series
7 cases on aircraft whose registry engine model is Lycoming HI0-360 series. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 1984 | 2 |
|---|---|
| 1986 | 1 |
| 1995 | 1 |
| 2001 | 1 |
| 2015 | 1 |
| 2020 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"highestInjuryLevel\" = 'Fatal'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('41553'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."highestInjuryLevel" = 'Fatal'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('41553'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB WPR20LA191Accident · 1 fatalClass 3 · LimitedFinal reportEnstrom 280 · Hayden, IDThe total loss of power while maneuvering at low altitude due to the detonation of two engine cylinders and damaged spark plugs.NTSB CEN15FA126Accident · 2 fatalField investigationFinal reportEnstrom 280FX · Erie, COAn in-flight failure of the helicopter's #2 main rotor spindle due to undetected fatigue cracking, which resulted in an in-flight breakup. Contributing to failure were the nonconforming thread root radius of the spindle and the manufacturer's failure to…NTSB MIA02FA026Accident · 2 fatalField investigationFinal reportEnstrom 280FX · Tallassee, ALThe failure of the pilot to maintain a safe altitude above terrain and maintain a visual lookout resulting in the helicopter colliding with power transmission lines and crashing into a river. A factor in the accident was the power transmission lines not being…NTSB NYC96FA003Accident · 2 fatalField investigationFinal reportEnstrom 280C · Quakertown, PAimproper installation of the magneto by maintenance personnel, which resulted in the loss of ignition and the loss of engine power. A factor relating to the accident was: the lack of suitable terrain for an emergency landing.NTSB NYC87LA012Accident · 1 fatalLimited investigationFinal reportEnstrom 280C · Newport, RIAircraft descended and collided with water when the pilot attempted to regain visual ground reference when weather deteriorated. No plt acc report was received. Plt time was not reported or available.NTSB NYC85FA015Accident · 2 fatalField investigationFinal reportEnstrom 280C · Butler, PAThe helicopter struck the static line of a high voltage transmission line while on a flt to photograph an apartment complex. The owner of the complex accompanied the plt on the flt, there after the acft was to be used for passenger sightseeing flts as part of…NTSB SEA84FA063Accident · 2 fatalField investigationFinal reportEnstrom 280C · Middleton, IDThe acft collided with the terrain during a test flt. Witnesses observed the acft rotate about 180 degrees about its vertical axis go nose low and descend vertically to the ground. A noise change described as a 'sputter' or tone change' was heard during this…