NTSB investigations: Lycoming HI0-360 series, UT
5 cases on aircraft whose registry engine model is Lycoming HI0-360 series. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 1982 | 1 |
|---|---|
| 1987 | 1 |
| 2009 | 2 |
| 2011 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'UT' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('41553'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."eventStateOrRegion" = 'UT' AND c."eventCountry" = 'USA'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.engine_model_code IN ('41553'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB WPR11FA426Accident · Serious injuriesField investigationFinal reportEnstrom 280FX · Heber City, UTThe pilot’s failure to ensure that there was sufficient fuel onboard to conduct the flight, which resulted in a loss of engine power due to fuel exhaustion. Contributing to the severity of the passengers’ injuries was the operator’s failure to provide…NTSB WPR09LA261Accident · No injuriesLimited investigationFinal reportEnstrom Helicopter 280C · Ogden, UTThe pilot's improper use of the helicopter's collective both during the takeoff sequence and while attempting remedial action in response to an engine over-boost condition, which resulted in a hard precautionary landing.NTSB WPR09LA156Accident · No injuriesLimited investigationFinal reportEnstrom 280FX · Wendover, UTA loss of engine power due to fuel exhaustion, which resulted from an inadequate preflight inspection by both pilots and their failure to ensure that adequate fuel was on board for the flight. Contributing to the accident was the flight instructor's…NTSB DEN87LA245Accident · Serious injuriesLimited investigationFinal reportEnstrom 280C · Bountiful, UTWhile on a local low level pleasure flt the plt failed to see power lines and an in flight collision with the lines occurred severing the right skid and 90 degree gear box from the acft. A semi-autorotative crash occurred on the bank of a irrigation reservoir.NTSB DEN82DTM08Accident · No injuriesFinal reportEnstrom 280C · Midway, UTThe aircraft crashed while being moved about 150 ft from the parking area to a storage building. There was about 2 1/2 ft of fresh snow on the ground. The snow had been cleared from the parking area in front of the storage building. However, a snow cat had…