Copy · SB-707-00A3364-04-- · 57 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0504; AD 2018-19-32 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ceb89d08ee66a3f79d5e209c1980d4fed872b639f5f5ab2e8499efdd2438a893'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 1–12

Commercial Airplanes 707 Service Bulletin ALERT Number: A3364 Original Issue: June 29, 1979 Revision 4: February 21, 2017 ATA System: 5401 SUBJECT: NACELLE STRUT DIAGONAL BRACE END FITTING INSPECTION AND

MODIFICATION

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes This service bulletin is applicable to all 707 and 720 Airplanes, in 7 Groups. The Variable Numbers and Group Information for the applicable airplanes is given below.

Refer to Service Bulletin Index D6-1647 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

DESCRIPTIONCONFIGURATIONGROUP All 707-100B LONG BODY, 707-100B SHORT BODY Airplanes.-1 All 707-100 LONG BODY Airplanes.-2 All 707-200, 707-300 Airplanes.-3 All 707-400 Airplanes.-4 All 707-300B, 707-300C Airplanes.-5 All 720 Airplanes.-6 All 720B Airplanes.-7 Airplane Models:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 13 of 57

707-100 LONG BODY, 707-100B LONG BODY, 707-100B SHORT BODY, 707-200, 707-300, 707-300B, 707-300C, 707-400, 720, 720B GroupVariable Number 6B0001 - B0029 7B0101 - B0125 6B0201 - B0203 6B0301 - B0306 6B0401 - B0402 6B0501 - B0515 7B2001 - B2008 7B2091 - B2092 7B2101 - B2116 7B2191 - B2194 7B2199 7B2201 - B2227 7B2401 - B2403 7B2501 - B2502 7B2551 - B2553 7B2601 - B2608 100001 - 00002 100004 - 00006 100101 100103 - 00113 100115 - 00153 300201 - 00205 200301 - 00305 200401 - 00415 100416 - 00449 100471 - 00475 100501 - 00513 100601 100701 - 00703 302001 - 02020 302101 - 02121 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 14 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

GroupVariable Number 302201 - 02207 302301 - 02303 302401 - 02418 404001 - 04005 404020 - 04022 404101 - 04106 404201 - 04218 404271 - 04272 404301 - 04303 505001 - 05060 505101 - 05138 505201 - 05208 505301 - 05312 505401 505601 - 05605 505631 - 05635 505701 - 05703 505801 - 05802 505821 - 05827 505831 - 05833 505851 - 05854 505891 - 05892 505921 - 05923 505941 - 05942 505961 - 05970 506001 - 06002 506101 506401 - 06404 506451 506461 507001 - 07017 507041 - 07059 507071 - 07081 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 15 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

GroupVariable Number 507101 - 07109 507181 507191 507201 - 07215 507251 - 07271 507401 - 07407 507451 - 07458 507501 - 07504 507601 - 07626 507661 - 07662 507681 - 07684 507701 - 07702 507801 - 07821 507901 - 07907 508001 - 08008 508021 508051 - 08056 508071 - 08077 508101 - 08104 508121 - 08129 508141 - 08144 508151 - 08153 508171 - 08173 508191 - 08192 508201 - 08210 508221 - 08224 508241 - 08244 508251 508261 508271 508301 - 08320 508324 - 08330 508333 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 16 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

GroupVariable Number 508401 - 08410 508451 - 08452 508471 - 08475 508501 - 08502 508551 - 08553 508581 - 08582 509001 - 09006 509101 - 09107 509161 - 09167 509201 - 09204 509221 - 09223 509227 509231 - 09232 509251 509271 509281 509286 - 09290 509411 509421 509438 509441

2. Spares Affected None.

B. Concurrent Requirements None.

C. Reason Inspection of the inboard and outboard nacelle strut diagonal brace tube, diagonal brace end fittings and mating fittings may detect cracks that could reduce the effectiveness of the four point attachment of the strut to the wing and lead to an engine separation.

The original telegraphic issue of this bulletin followed reports of cracks in 6 end fittings in the outboard nacelle strut diagonal braces, in 34 forward mating fittings on the nacelle struts, and in 4 aft mating fittings on the lower surface of the wing. The affected airplanes had accumulated from 23,200 to 59,400 flight hours and 8,400 to 17,800 flights.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 17 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

The diagonal brace end fitting cracks initiated in the fastener holes nearest the end of the brace tube and propagated into the exposed portion of the fitting at the root of the fitting lugs. Cracking is attributed to fatigue.

The forward mating fitting cracks initiated in the lug holes and propagated directly aft to the edge of the lug. Cracking is attributed to stress corrosion.

The aft mating fitting cracks were in the vertical web forward and aft of the fitting lug and are attributed to stress corrosion and fatigue.

The original issue of the bulletin advised a one-time detailed inspection for cracks in the exposed surface of the brace end fittings, the forward mating fitting on the nacelle strut and the aft mating fitting on the wing lower surface.

Revision 1 formalized the original telegraphic issue of the bulletin, advised repeat inspections of the affected fittings and provided crack removal, modification and fitting replacement instructions. The repeat inspections of the two mating fittings could be accomplished by doing a detailed or High Frequency Eddy Current (HFEC) or alternative dye penetrant inspection. The brace end fittings could be detail inspected, by low frequency eddy current (LFEC) inspection without removing the fitting attach fasteners, or by HFEC inspection with the fasteners removed. Modifying the brace end fittings and the mating fittings provided a flight inspection-free period.

Telegraphic Revision 2 of the bulletin clarified the time at which repeat inspections should commence.

As of the Revision 3 date of this service bulletin, 29 operators have reported 66 cracked diagonal brace end fittings, 45 cracked forward mating fittings and 9 cracked aft mating fittings on airplanes with 23,200 to 63,200 flight-hours (8,300 to 34,200 flights).

In two later reports, the cracks in the diagonal brace end fittings initiated and propagated immediately inside the end of the brace tube before emerging into the exposed portion of the fitting. Such cracks can only be detected when they emerge, or with an open hole HFEC inspection through the hole between the fitting lugs, or when the fitting is removed from the tube.

In another report on the aft mating fitting on the wing lower surface, the lower half of the lug separated from the fitting on an airplane with 49,400 flight-hours and 15,950 flights. The crack initiated in the bore of the lug hole and propagated as a result of fatigue and stress corrosion. Detection of such cracks would require removal of the lug hole bushing and HFEC inspection, or detailed inspection of the lug edge.

Revision 3 of the bulletin was issued to change the inspection requirements, limit oversizing of the end fitting-to-tube attach holes on the outboard nacelle strut diagonal brace on specific airplanes, and provide part information and part replacement instructions.

Subsequent to release of Revision 3 of this service bulletin, an operator had reported complete separation of the body of an outboard nacelle strut diagonal brace forward end fitting as a result of a crack which ran circumferentially around the forward row of fastener holes. The airplane had accumulated 43,773 flight-hours and 14,735 flights. The fitting had previously been detail inspected in accordance with this service bulletin, but the cracking was not detected until the brace was removed during major overhaul.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 18 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Revision 4 is sent to change the inspection interval for all HFEC and alternative dye penetrant inspections, and to add detailed inspections of the diagonal brace tube around the fasteners at each diagonal brace end fitting for any crack and open hole HFEC inspections of the diagonal brace tube end fitting fastener holes. The option of shot peening parts has been deleted. The open hole HFEC inspection of the forward mating fitting lugs has been added. The surface HFEC inspection of the aft mating (drag) fitting lugs has been added. Repair options for the end fittings have been removed.

The data given in Notice of Status Change 707 A3364NSC1, A3364NSC2 and A3364NSC3 is included in this revision.

Terminology has been changed in the Work Instructions to agree with the terminology defined in Paragraph 3.A., General Information - Notes.

Boeing Service Related Problem (SRP) 707-SRP-54-0155 is related to this service bulletin.

Boeing Fleet Team Digest (FTD) 707 FTD 54-05001 is related to this service bulletin.

D. Description Do detailed inspections and HFEC inspections of the nacelle strut diagonal brace end fittings, diagonal brace tube, forward mating fitting and aft mating fitting (or alternative dye penetrant inspection of vertical webs on aft mating fitting) for any crack. Repeat detailed inspections and HFEC inspections for any crack in these areas.

Repeat exterior detailed inspections consist of a detailed inspection of the exposed portion of the diagonal brace end fittings for any crack propagating from the fitting-to-tube attach fastener holes, the innermost end of the fitting, or the outer surface of the fitting where it locates just inside the tube end.

If any crack is found in the end fitting, replace the end fitting. At both ends of the diagonal brace tube, do a detailed inspection for any crack propagating from the tube-to-fitting fastener holes. If any crack is found in the end of the diagonal brace tube, replace the diagonal brace tube. At the forward mating fitting on the nacelle strut, do a detailed inspection of the exposed portions of the fitting lugs, paying particular attention to the aft end of the lugs. At the aft mating fitting on the wing lower surface, do a detailed inspection of the vertical webs and the exposed portions of the lug sides and edge for any crack propagating from the lug hole.

Repeat interior detailed inspection and HFEC inspection of the diagonal brace end fitting interiors, by removing the brace end coupling pins and inserting an angled surface probe through the hole between the fitting lugs. Required inspection areas are the innermost end of the fitting, around the fitting-to-tube attach fastener heads, and the inner surface for any crack propagating from the outer surface just inside the tube end.

In addition to the interior inspection, remove the diagonal brace end fittings from the tube. Do a HFEC inspection of the fitting outer surface area that locates just inside the tube end, and the innermost end of the fitting. Also, do a HFEC inspection on the fastener holes for any crack in the end fitting and the diagonal brace tube. If any crack is found in the diagonal brace end fitting, replace the end fitting. If any crack is found in the diagonal brace tube, replace the diagonal brace tube.

At the forward mating fitting on the nacelle strut, do a HFEC inspection and a detailed inspection of the fitting lugs for any crack. HFEC inspection requires removal of the diagonal brace-to-fitting coupling pin and surface HFEC inspection around the lug hole edges without removing the bushings. Additional inspection of the forward mating fitting lugs requires removing the lug hole bushings to do an open hole HFEC inspection of the lug holes.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 19 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

At the aft mating fitting on the lower surface of the wing, do a HFEC or alternative dye penetrant inspection and a detailed inspection of the vertical webs of the fitting for any crack. Do a surface HFEC inspection of the fitting lug at the sides and edges of the lugs, and then remove the lug hole bushing and do an open hole HFEC inspection, and oversizing of the hole to remove any undetectable crack.

Hole size limitations allow only two such oversizings.

If any crack is found in any mating fitting, except for any crack in the lug holes of the forward or aft mating fitting within repair limits, replace the fitting.

Effects of this Revision on airplanes on which Original Issue, Revision 1, Revision 2 or Revision 3 was previously done:

ActionConditionGroup Do a detailed inspection of the forward mating fitting, aft mating fitting, diagonal brace end fittings and diagonal brace tube. Compliance times have been changed.

All AirplanesAll Do a surface HFEC inspection of the forward mating fitting, aft mating fitting and diagonal brace end fittings.

Compliance times have been changed.

Do an open hole HFEC inspection of the forward mating fitting, aft mating fitting, diagonal brace end fittings and diagonal brace tube.

Compliance times have been changed.

The work in this service bulletin is done in the maintenance zone(s) given below.

Group 1:

Affected Maintenance Zones ZoneModel 4-55, 4-56, 4-57, 4-58707-100B LONG BODY, 707- 100B SHORT BODY Group 2:

Affected Maintenance Zones ZoneModel 4-55, 4-56, 4-57, 4-58707-100 LONG BODY Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 20 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Group 3:

Affected Maintenance Zones ZoneModel 4-55, 4-56, 4-57, 4-58707-200, 707-300 Group 4:

Affected Maintenance Zones ZoneModel 4-55, 4-56, 4-57, 4-58707-400 Group 5:

Affected Maintenance Zones ZoneModel 4-55, 4-56, 4-57, 4-58707-300B, 707-300C Group 6:

Affected Maintenance Zones ZoneModel 4-55, 4-56, 4-57, 4-58720 Group 7:

Affected Maintenance Zones ZoneModel 4-55, 4-56, 4-57, 4-58720B E. Compliance Federal Aviation Administration (FAA) Airworthiness Directive AD 82-24-03 is related to this service bulletin. The effective date of AD 82-24-03 is November 23, 1982.

The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Accomplish paragraphs 1 thru 4, based on the applicable conditions in the paragraphs below and Tables 1 thru 4, in accordance with Paragraph 3. Accomplishment Instructions.

To detect any crack in the nacelle strut diagonal brace and associated fittings accomplish the following on airplanes with nacelle strut diagonal braces and associated fittings which have accumulated 7,500 or more flight cycles:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 21 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

1. If an inspection was not done in accordance with this service bulletin before the Revision 4 date of this service bulletin, within 500 flight cycles after the effective date of AD 82-24-03, do a detailed inspection of the nacelle strut diagonal braces and associated fittings in accordance with Revision 4 of this service bulletin and repeat detailed inspections and HFEC inspection thereafter at the intervals specified in Tables 1, 2, 3, and 4.

2. If an inspection was done in accordance with this service bulletin before the Revision 4 date of this service bulletin, do all of the following:

a. Detailed Inspection:

Within 250 flight cycles after the Revision 4 date of this service bulletin, do detailed inspections of the nacelle strut diagonal brace end fittings, diagonal brace tube, forward mating fitting and aft mating fitting for any crack, and repeat the inspections at the intervals specified in Tables 1, 2, 3 and 4 below.

b. HFEC or Dye Penetrant Inspections:

(1) Do whichever occurs first:

(a) Accomplish the inspections specified in AD 82-24-03.

(b) Within 1,500 flight cycles or 48 months, after the Revision 4 date of this service bulletin, whichever occurs first, do a HFEC inspection of the nacelle strut diagonal brace end fittings, forward mating fitting and aft mating fitting (or alternative dye penetrant inspection of vertical webs on aft mating fitting) for any crack.

(2) Within 1,500 flight cycles or 48 months, after the Revision 4 date of this service bulletin, whichever occurs first, do an initial HFEC inspection of the diagonal brace tube for any crack.

(3) Repeat the inspections at the intervals specified in Tables 1, 2, 3 and 4 below.

3. If any crack is found in the nacelle strut diagonal brace end fittings, diagonal brace tube, forward mating fitting or aft mating fitting, except for any crack in the lug holes of the forward or aft mating fitting within repair limits, replace the cracked part in accordance with this service bulletin, or contact The Boeing Company for repair instructions and do the repair before further flight. Parts oversized beyond the limits specified in this service bulletin must be replaced before further flight.

4. For Group 3, 4, and 6 airplanes, if the outboard diagonal brace end fitting (forward or aft) attach holes have been oversized in accordance with Revision 3 of this service bulletin, replace the diagonal brace assembly within 1,000 flight cycles after the Revision 4 date of this service bulletin.

Table 1: Forward Mating Fitting Repeat Intervals Not To ExceedType Inspection 250 flight cycles.Detailed inspection 1,500 flight cycles or 48 months, whichever occurs first.Surface HFEC inspection 1,500 flight cycles or 48 months, whichever occurs first.Open hole HFEC inspection Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 22 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Table 2: Aft Mating Fitting Repeat Intervals Not To ExceedType Inspection 250 flight cycles.Detailed inspection 1,500 flight cycles or 48 months, whichever occurs first.Surface HFEC inspection or alternative dye penetrant inspection of web.

1,500 flight cycles or 48 months, whichever occurs first.Surface HFEC inspection of lug and open hole HFEC inspection of lug hole with bushing removed then hole oversized.

Table 3: Diagonal Brace End Fittings Repeat Intervals Not To ExceedType Inspection 250 flight cycles.Detailed inspection 1,500 flight cycles or 48 months, whichever occurs first.Exterior surface (with fitting removed) and interior surface HFEC inspection.

1,500 flight cycles or 48 months, whichever occurs first.HFEC open hole inspection (with fitting removed) with hole oversizing.

Table 4: Diagonal Brace Tube Repeat Intervals Not To ExceedType Inspection 250 flight cycles.Detailed inspection 1,500 flight cycles or 48 months, whichever occurs first.Open hole HFEC inspection F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.

In addition, the Manager of the FAA Los Angeles Aircraft Certification Office approves the action (i.e.

inspection or modification) defined in this service bulletin as an alternative method of compliance to the requirements of AD 82-24-03. All provisions of AD 82-24-03 that are not specifically referenced in the above statement remain fully applicable and must be complied with.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 23 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

G. Manpower The table below shows an estimate of the task hours necessary to do this service bulletin for each airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour data if necessary. The estimate does not include lost time. These are some examples of lost time:

• Time to adjust to the workplace

• Time to schedule the work

• Time to inspect the work

• Time to cure the materials

• Time to make the parts

• Time to find the tools Detailed Inspection Elapsed HoursTask HoursNumber of PersonsTask 3124Open Access 144Inspect 5204Close Access 936TOTAL FOR EACH AIRPLANE High Frequency Eddy Current (HFEC) Inspection and Modification Elapsed HoursTask HoursNumber of PersonsTask 8486Open Access 482Inspect 321281Change (a) 12726Close Access 24128TOTAL FOR EACH AIRPLANE (b)

(a) If required.

(b) Total does not include hours required for change.

Additional Hours for Fitting Replacement at One Location Elapsed HoursTask HoursNumber of PersonsTask 12322 - 4Diagonal Brace Fwd End Fitting (a) 12322 - 4Diagonal Brace Aft End Fitting (a) 32902 - 4Diagonal Brace Fwd Mating Fitting (b) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 24 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Pages 25–36 of 57