Copy · U.S. DOT/FAA - SB-DC10-28-252-01 · 83 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2010-0384; AD 2010-20-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'e55eabc8c7fe50acd15947be7d444b11ea89f23015cfa32913762d637f1aef7d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 25–36

Group 7:

Wire Kit SR10280063 NotesNameQTYQTYQTYQTYNew Part Number -113-111-110-104 WIRE CODE 80148 FT69 FT14 FT7 FTDC2426-1C-22NM (DMS 2426) or equivalent SOCKET T/C 52491221M39029/22-192

(a)TERMINAL LUG 878912215D0086-3

(a) Or approved equivalent, refer to AEPL, Drawing 7595071.

2. Parts and Materials Supplied by the Operator:

None.

3. Parts Modified and Reidentified:

None.

4. Parts Removed and Not Replaced:

None.

D. Parts Necessary to Change Spares None E. Special Tooling - Price and Availability None.

F. Special Tooling Necessary to do this Service Bulletin No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 37 of 83 BOEING SERVICE BULLETIN DC10-28-252

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 38 of 83 BOEING SERVICE BULLETIN DC10-28-252

BLANK PAGE

3. ACCOMPLISHMENT INSTRUCTIONS A. GENERAL INFORMATION WARNING: IF ELECTRICAL POWER IS APPLIED TO THE AIRPLANE, MAKE SURE YOU OBEY ALL PRECAUTIONS WHILE YOU DO WORK. IF YOU DO NOT OBEY THE

PRECAUTIONS, DEATH OR INJURY TO PERSONS, AND DAMAGE TO THE AIRPLANE CAN OCCUR.

WARNING: WHILE YOU DO WORK IN THE TAILCONE AREA, MAKE SURE THAT YOU OBEY ALL SAFETY PRECAUTIONS. IF YOU DO NOT OBEY THE PRECAUTIONS, DEATH OR INJURY TO PERSONS CAN OCCUR.

CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,

METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.

CAUTION: ELECTRICALLY GROUND THE AIRPLANE. THIS WILL HELP TO PREVENT DAMAGE TO THE AIRPLANE OR EQUIPMENT.

NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions give the recommended sequence of steps. The sequence of steps to do this service bulletin can be changed.

2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for definition of the acronyms.

3. Equivalent parts are listed in the AEPL, Drawing 7595071.

4. Use the approved fastener and process material substitutions, DC-10, MD-10 SRM

51.

5. Any protrusion of threads is acceptable provided that the threads do not rub or ride against nearby wire assemblies or components.

6. A 1/8-inch thick stack of the same type washers called for in this service bulletin is the maximum thickness which may be used under fastener head or nut to counteract accumulation of tolerances.

EXCEPTION: When the available fastener length increments are greater than 1/16-inch, a 3/16-inch thick stack of the same type washers may be used.

7. Refer to the following Standard Wiring Practices Manual (SWPM) chapters for applicable operation:

OperationChapter General - Maintenance Safety PracticesSWPM 20-00-00 Electrical Identification and Shop PracticesSWPM 20-00-09

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 39 of 83 BOEING SERVICE BULLETIN DC10-28-252

Electrical Wire CodesSWPM 20-00-13 Electrical Wire End Termination CodesSWPM 20-00-16 Fabricating and Installing Wire Harness - Commercial SWPM 20-10-01 Coil and Stow - Maintenance PracticesSWPM 20-10-04 Terminal Blocks - Maintenance PracticesSWPM 20-20-02 General Installation Hardwares - Maintenance Practices SWPM 20-20-03 Power Distribution Bus - Maintenance Practice SWPM 20-40-01

8. Obey all of the warnings and cautions given in the specified manual sections as applicable.

9. Review and understand all general notes of Service Rework Drawing SR10280063 sheets 3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 3.10, and 7 before start of modification.

10. These work instructions refer to procedures included on other Boeing documents.

When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

B. WORK INSTRUCTIONS Group 1:

1. Make fuel system safe for maintenance. Refer to MD-10 AMM 28-43-01 as an accepted procedure.

2. Gain access to area of modification, refer to Table below:

Refer toName/LocationPanel Number MD-10 AMM 06-35-00Access Panel Left Wing Leading Edge and Vent Box 516AB, 516EB, 526DB, 527AB, 537AB MD-10 AMM 06-36-00Access Panel Right Wing Leading Edge and Vent Box 616AB, 616EB, 626DB, 627AB, 637AB

3. Install fuel tank float level switch In-line fuses, in the locations shown below relative to appendices:

In Accordance with AppendixLocation AFuel Tank 1 CFuel Tank 2

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 40 of 83 BOEING SERVICE BULLETIN DC10-28-252

In Accordance with AppendixLocation FFuel Tank 3

4. Do return-to-service test of fuel tank float level or pressure switches in accordance with Appendix N.

5. Close access to area of modification.

6. Put the airplane back to a serviceable condition.

Group 2:

1. Make fuel system safe for maintenance. Refer to MD-10 AMM 28-43-01 as an accepted procedure.

2. Gain access to area of modification, refer to Table below:

Refer toName/LocationPanel Number MD-10 AMM 06-35-00Access Panel Left Wing Leading Edge and Vent Box 516AB, 516EB, 526DB, 527AB, 537AB MD-10 AMM 06-36-00Access Panel Right Wing Leading Edge and Vent Box 616AB, 616EB, 626DB, 627AB, 637AB MD-10 AMM 06-27-00Right Main Landing Gear Wheel Well Right Main Landing Gear Door

3. Install fuel tank float level switch In-line fuses, in the locations shown below relative to appendices:

In Accordance with AppendixLocation AFuel Tank 1 CFuel Tank 2 FFuel Tank 3 HUpper and Lower Auxiliary Fuel Tanks

4. Do return-to-service test of fuel tank float level or pressure switches in accordance with Appendix O.

5. Close access to area of modification.

6. Put the airplane back to a serviceable condition.

Group 3:

1. Make fuel system safe for maintenance. Refer to DC-10 AMM 28-43-01 as an accepted procedure.

2. Gain access to area of modification, refer to Table below:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 41 of 83 BOEING SERVICE BULLETIN DC10-28-252

Refer toName/LocationPanel Number DC-10 AMM 06-35-00Access Panel Left Wing Leading Edge and Vent Box 516AB, 516EB, 526DB, 527AB, 537AB DC-10 AMM 06-36-00Access Panel Right Wing Leading Edge and Vent Box 616AB, 616EB, 626DB, 627AB, 637AB

3. Install fuel tank float level switch In-line fuses, in the locations shown below relative to appendices:

In Accordance with AppendixLocation BFuel Tank 1 DFuel Tank 2 GFuel Tank 3

4. Do return-to-service test of fuel tank float level or pressure switches in accordance with Appendix P.

5. Close access to area of modification.

6. Put the airplane back to a serviceable condition.

Group 4:

1. Make fuel system safe for maintenance. Refer to DC-10 AMM 28-43-01 as an accepted procedure.

2. Gain access to area of modification, refer to Table below:

Refer toName/LocationPanel Number DC-10 AMM 06-35-00Access Panel Left Wing Leading Edge and Vent Box 516AB, 516EB, 526DB, 527AB, 537AB DC-10 AMM 06-36-00Access Panel Right Wing Leading Edge and Vent Box 616AB, 616EB, 626DB, 627AB, 637AB DC-10 AMM 06-27-00Right Main Landing Gear Wheel Well Right Main Landing Gear Door DC-10 AMM 06-21-00Center Cargo Compartment Center Cargo Compartment Door

3. Install fuel tank float level and pressure switch In-line fuses, in the locations shown below relative to appendices:

In Accordance with AppendixLocation BFuel Tank 1

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 42 of 83 BOEING SERVICE BULLETIN DC10-28-252

In Accordance with AppendixLocation EFuel Tank 2 GFuel Tank 3 KAft Auxiliary Fuel Tank LUpper and Lower Auxiliary Fuel Tanks

4. Do return-to-service test of fuel tank float level or pressure switches in accordance with Appendix Q.

5. Close access to area of modification.

6. Put the airplane back to a serviceable condition.

Group 5:

1. Make fuel system safe for maintenance. Refer to DC-10 AMM 28-43-01 as an accepted procedure.

2. Gain access to area of modification, refer to Table below:

Refer toName/LocationPanel Number DC-10 AMM 06-35-00Access Panel Left Wing Leading Edge and Vent Box 516AB, 516EB, 526DB, 527AB, 537AB DC-10 AMM 06-36-00Access Panel Right Wing Leading Edge and Vent Box 616AB, 616EB, 626DB, 627AB, 637AB DC-10 AMM 06-27-00Right Main Landing Gear Wheel Well Right Main Landing Gear Door DC-10 AMM 06-21-00Center Cargo Compartment Center Cargo Compartment Door

3. Install fuel tank float level and pressure switch In-line fuses, in the locations shown below relative to appendices:

In Accordance with AppendixLocation BFuel Tank 1 EFuel Tank 2 GFuel Tank 3 LUpper and Lower Auxiliary Fuel Tanks MAft Auxiliary Fuel Tank

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 43 of 83 BOEING SERVICE BULLETIN DC10-28-252

4. Do return-to-service test of fuel tank float level or pressure switches in accordance with Appendix R.

5. Close access to area of modification.

6. Put the airplane back to a serviceable condition.

Group 6:

1. Make fuel system safe for maintenance. Refer to DC-10 AMM 28-43-01 as an accepted procedure.

2. Gain access to area of modification, refer to Table below:

Refer toName/LocationPanel Number DC-10 AMM 06-35-00Access Panels Left Wing Leading Edge and Vent Box 510KB, 510PB, 520KB, 520RB, 530JB DC-10 AMM 06-36-00Access Panels Right Wing Leading Edge and Vent Box 610KB, 610PB, 620KB, 620RB, 630JB DC-10 AMM 06-27-00Left and Right Main Landing Gear Wheel Wells Left and Right Main Landing Gear Doors DC-10 AMM 06-32-09Mid Passenger Compartment Floor panel, and Float Switch Cover AZZ7656-1, AAL7173-1 DC-10 AMM 06-32-11Aft Auxiliary fuel tank panels, Float Switch Cover and Aft Passenger Compartment Floor panel (ARO Hatch), AWE9267-503, AWE9270- 517, AAL7173-1 and 291HF,

3. Install fuel tank float level switch In-line fuses, in the locations shown below relative to appendices:

In Accordance with AppendixLocation BFuel Tank 1 DFuel Tank 2 GFuel Tank 3 ICenter Wing Fuel Tanks JForward and Aft Auxiliary Fuel Tank

4. Do return-to-service test of fuel tank float level or pressure switches in accordance with Appendix S.

5. Close access to area of modification.

6. Put the airplane back to a serviceable condition.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 44 of 83 BOEING SERVICE BULLETIN DC10-28-252

Group 7:

1. Make fuel system safe for maintenance. Refer to DC-10 AMM 28-43-01 as an accepted procedure.

2. Gain access to area of modification, refer to Table below:

Refer toName/LocationPanel Number DC-10 AMM 06-35-00Access Panels Left Wing Leading Edge and Vent Box 510KB, 510PB, 520KB, 520RB, 530JB DC-10 AMM 06-36-00Access Panels Right Wing Leading Edge and Vent Box 610KB, 610PB, 620KB, 620RB, 630JB DC-10 AMM 06-27-00Left and Right Main Landing Gear Wheel Wells Left and Right Main Landing Gear Doors

3. Install fuel tank float level switch In-line fuses, in the locations shown below relative to appendices:

In Accordance with AppendixLocation BFuel Tank 1 DFuel Tank 2 GFuel Tank 3 ICenter Wing Fuel Tanks

4. Do return-to-service test of fuel tank float level or pressure switches in accordance with Appendix T.

5. Close access to area of modification.

6. Put the airplane back to a serviceable condition.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1: January 06, 2010 45 of 83 BOEING SERVICE BULLETIN DC10-28-252

This Appendix applies only to: Group 1-2.

MORE DATADESCRIPTION OF TASKSTEP In accordance with Drawing SR10280063 sheets 10, 11, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 7,

9.13, 9.14, 102.201 and 304.201.

Install fuel tank float level switch In-line fuse, reference designator F1-119 within float level switch reference designator S1-119 wiring.

1 In accordance with Drawing SR10280063 sheets 10, 15, 15.1, 3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7,

3.8, 3.9, 7, 9.13, 9.14, 102.201, 302.201 and

304.201.

Install fuel tank float level switch In-line fuse, reference designator F1-120 within float level switch reference designator S1-120 wiring.

2 Install fuel tank float level switch In-line fuse, reference designator F1-121 within float level switch reference designator S1-121 wiring.

3 In accordance with Drawing SR10280063 sheets 10, 15, 15.1, 3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7,

3.8, 3.9, 7, 9.13, 9.15, 102.201, 302.201 and

304.201.

Install fuel tank float level switch In-line fuse, reference designator F1-176 within float level switch reference designator S1-176 wiring.

4 In accordance with Drawing SR10280063 sheets 10, 14, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 7,

9.13, 9.15, 102.201 and 302.201.

Install fuel tank float level switch In-line fuse, reference designator F1-1391 within float level switch reference designator S1-1391 wiring.

5 In accordance with Drawing SR10280063 sheets 10, 13, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 7,

9.13, 9.15, 102.201 and 305.201.

Install fuel tank float level switch In-line fuse, reference designator F1-1392 within float level switch reference designator S1-1392 wiring.

6 In accordance with Drawing SR10280063 sheets 10, 12, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 7,

9.13, 9.16, 102.201 and 304.201.

Install fuel tank float level switch In-line fuse, reference designator F1-735 within float level switch reference designator S1-735 wiring.

7 Appendix A: FUEL TANK 1 - MD-10-10F AND MD-10-30F (SHEET 1 OF 1)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1 January 06, 2010 46 of 83 BOEING SERVICE BULLETIN DC10-28-252

This Appendix applies only to: Group 3-7.

MORE DATADESCRIPTION OF TASKSTEP In accordance with Drawing SR10280063 sheets 10, 11, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 7,

9.13, 9.21, 111.201 or 112.201 and 310.201,

311.203 312.202 or 313.202.

Install fuel tank float level switch In-line fuse, reference designator F1-119 within float level switch reference designator S1-119 wiring.

1 In accordance with Drawing SR10280063 sheets 10, 15, 15.1, 3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7,

3.8, 3.9, 7, 9.13, 9.21, 111.201 or 112.201 and

307.201, 310.201, 311.202, 312.202 or 313.201.

Install fuel tank float level switch In-line fuse, reference designator F1-120 within float level switch reference designator S1-120 wiring.

2 In accordance with Drawing SR10280063 sheets 10, 15, 15.1, 3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7,

3.8, 3.9, 7, 9.13, 9.21, 111.201 or 112.201 and

310.201, 311.202, 312.202 or 313.201.

Install fuel tank float level switch In-line fuse, reference designator F1-121 within float level switch reference designator S1-121 wiring.

3 In accordance with Drawing SR10280063 sheets 10, 15, 15.1, 3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7,

3.8, 3.9, 7, 9.13, 9.22, 111.201 or 112.201 and

307.201, 310.201, 312.202 or 313.201.

Install fuel tank float level switch In-line fuse, reference designator F1-176 within float level switch reference designator S1-176 wiring.

4 In accordance with Drawing SR10280063 sheets 10, 12, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 7,

9.13, 9.22, 111.201 or 112.201 and 310.201 or

311.203 or 312.202 or 313.202.

Install fuel tank float level switch In-line fuse, reference designator F1-735 within float level switch reference designator S1-735 wiring.

5 Appendix B: FUEL TANK 1 - DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30 W/AFT TANK 1500 AND 3200 GALLONS, DC-10-30F, DC-10-30F (KC-10A), DC-10-30F (KDC-10), DC-10-40, DC-10-40F (SHEET 1 OF 1)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1 January 06, 2010 47 of 83 BOEING SERVICE BULLETIN DC10-28-252

This Appendix applies only to: Group 1-2.

MORE DATADESCRIPTION OF TASKSTEP In accordance with Drawing SR10280063 sheets 16, 16.5, 3, 3.1, 3.3, 3.5, 3.6, and 3.9.

Install new Terminal Board, item number S3-454.

1 In accordance with Drawing SR10280063 sheets 10, 16, 16.3, 3, 3.1, 3.2, 3.3, 3.4, 3.5,

3.6, 3.7, 3.8, 3.9, 7, 9.13, 9.16, 102.201 and

304.201.

Install fuel tank float level switch In-line fuse, reference designator F1-90 within float level switch reference designator S1- 90 wiring.

2 Install fuel tank float level switch In-line fuse, reference designator F1-177 within float level switch reference designator S1- 177 wiring.

3 In accordance with Drawing SR10280063 sheets 10, 16, 16.3, 16.4, 3, 3.1, 3.2, 3.3, 3.4,

3.5, 3.6, 3.7, 3.8, 3.9, 7, 9.13, 9.17, 102.201 and 305.201.

Install fuel tank float level switch In-line fuse, reference designator F1-1363 within float level switch reference designator S1- 1363 wiring.

4 Install fuel tank float level switch In-line fuse, reference designator F1-1393 within float level switch reference designator S1- 1393 wiring.

5 Appendix C: FUEL TANK 2 - MD-10-10F AND MD-10-30F (SHEET 1 OF 1)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: November 25, 2008 DC10-28-252Revision 1 January 06, 2010 48 of 83 BOEING SERVICE BULLETIN DC10-28-252

Pages 49–60 of 83