U.S. Department of Transportation Federal Aviation Administration Advisory Circular Subject: Aircraft Operations at Altitudes Above 25,000 Feet Mean Sea Level or Mach Numbers Greater Than .75 Date: 3/29/13 Initiated by: AFS-800 AC No: 61-107B Change:
FOREWORD This advisory circular (AC) alerts pilots transitioning from aircraft with less performance capability to complex, high-performance aircraft that are capable of operating at high altitudes and high airspeeds. In particular, this AC stresses special physiological, equipment, and aerodynamic considerations involved in these kinds of operations. It also provides information to aid pilots in becoming familiar with the basic phenomena associated with high-altitude and high-speed flight.
Title 14 of the Code of Federal Regulations (14 CFR) part 61 prescribes the knowledge and skill requirements for the various airman certificates and ratings, including category, class, and type ratings authorized to be placed thereon. The civil aircraft fleet consists of numerous aircraft capable of high-altitude flight. Certain knowledge elements of high-altitude flight are essential for the pilots of these aircraft. As required by 14 CFR § 61.31, pilots who fly at altitudes at or above FL250 in a pressurized aircraft must receive training in the critical factors relating to safe flight operations under those circumstances. These critical elements include knowledge of the special physiological and/or aerodynamic considerations that should be given to highperformance aircraft operating in the high-altitude environment. High-altitude flight has different effects on the human body than those experienced during lower altitude flight. An aircraft's aerodynamic characteristics displayed in high altitude flight may differ significantly from those experienced when penetrating at a lower altitude. Knowledge of and skill in operating high-performance aircraft will enhance the pilot's ability to easily transition into aircraft capable of high speed, high altitude flight.
It is beyond the scope of this AC to provide a more definitive treatment of this subject. Pilots should recognize that they need greater knowledge and skills for the safe and efficient operation of state-of-the-art turbine and turbocharged powered aircraft. We strongly urge pilots to pursue further study from the many excellent textbooks, charts, and other technical reference materials available through industry sources. Pilots will obtain from these sources a detailed understanding of both physiological and aerodynamic factors that relate to the safe and efficient operation of the broad variety of high-altitude aircraft available today and forecast for the future.
/s/ for John M. Allen Director, Flight Standards Service
Page iii (and iv)
CONTENTS Paragraph Page CHAPTER 1. GENERAL INFORMATION
1-1. Purpose1
1-2. Cancellation1
1-3. Related Regulations1
1-4. Definitions1
1-5. Related Reading Material2
1-6. Warning, Caution, and Note3
1-7. Background3
1-8. Discussion3
CHAPTER 2. RECOMMENDATIONS FOR HIGH-ALTITUDE TRAINING
2-1. Purpose5
2-2. Outline5
2-3. Ground Training7
2-4. The High-Altitude Flight Environment7
2-5. Weather8
2-6. Flight Planning and Navigation9
2-7. Physiological Training12
2-8. FAA Physiological Training30
2-9. High-Altitude Systems and Equipment31
2-10.Aerodynamics and Performance Factors35
2-11.Emergencies and Irregularities at High Altitudes33
2-12.Flight Training38
CHAPTER 3. MACH FLIGHT AT HIGH ALTITUDES
3-1. Purpose41
3-2. Critical Aspects of Mach Flight41
3-3. Aircraft Aerodynamics and Performance43
TABLES
Table 2-1. Gas Laws and Their Effect on the Human Body12
Table 2-2. Trapped Gas Issues16
Table 2-3. In-Flight Treatment of Trapped Gas Emergencies17
Table 2-4. Hypoxia Types18
Table 2-5. Common Hypoxia Signs and Symptoms20
Table 2-6. Common Emergency Procedures for Hypoxia22
Table 2-7. Types of Evolved Gas Decompression Sickness27
Table 2-8. Aircraft Cabin Volume Ratios36
FIGURES
Figure 2-1. Standard High-Altitude Service Volume12
Figure 2-2. Blood Cells and Alveoli14
Figure 2-3. Times of Useful Consciousness vs. Altitude24
Par 1-1 Page 1 CHAPTER 1. GENERAL INFORMATION
1-1. PURPOSE. This advisory circular (AC) alerts pilots transitioning from aircraft with less performance capability to complex, high-performance aircraft capable of operating at high altitudes and high airspeeds of the special physiological, equipment, and aerodynamic considerations involved in these kinds of operations. It also provides information to aid pilots in becoming familiar with the basic phenomena associated with high-altitude and high-speed flight.
1-2. CANCELLATION. This AC cancels AC 61-107A, Operations of Aircraft at Altitudes Above 25,000 Feet MSL and/or Mach Numbers (Mmo) Greater Than .75, dated January 2, 2003.
1-3. RELATED REGULATIONS. In addition to the training required by Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.31(g), pilots of high-altitude aircraft should be familiar with the following regulations.
• Title 14 CFR part 91, § 91.121, Altimeter Settings.
• Section 91.135, Operations in Class A Airspace.
• Section 91.159, VFR Cruising Altitude or Flight Level.
• Section 91.179, IFR Cruising Altitude or Flight Level.
• Section 91.180, Operations Within Airspace Designated as Reduced Vertical Separation Minimum Airspace.
• Section 91.211, Supplemental Oxygen.
• Section 91.215, ATC Transponder and Altitude Reporting Equipment and Use.
1-4. DEFINITIONS.
a. Aspect Ratio. The relationship between the wing chord and the wingspan. A short wingspan and wide wing chord equal a low aspect ratio.
b. Aileron Buzz. A very rapid oscillation of an aileron, at certain critical airspeeds on some aircraft, that does not usually reach large magnitudes nor become dangerous. It is often caused by shock-induced separation of the boundary layer.
c. Aileron Snatch. A violent back and forth movement of the aileron control as airflow changes over the surface.
d. Cabin Altitude. Cabin pressure in terms of equivalent altitude above sea level.
e. Critical Mach Number (Mcr). The free stream Mach number (M) at which local sonic flow such as buffet, airflow separation, and shock waves becomes evident. These phenomena occur above Mcr, and are as follows:
(1) Subsonic. M below .75.
(2) Transonic. M from .75 to 1.20.
(3) Supersonic. M from 1.20 to 5.0.
Page 2 Par 1-4
(4) Hypersonic. M above 5.0.
f. Drag Divergence. A phenomenon that occurs when an airfoil’s drag increases sharply and requires substantial increases in power (thrust) to produce further increases in speed. Do not confuse drag divergence with Mcr. The drag increase is due to the unstable formation of shock waves that transform energy into heat and into pressure pulses that act to consume a major portion of the available propulsive energy. Turbulent air may produce an increase in the coefficient of drag.
g. Force. Generally defined as the cause for motion or the cause of change or stoppage of motion. The ocean of air through which an aircraft must fly has both mass and inertia and, thus, is capable of exerting tremendous forces on an aircraft moving through the atmosphere. When all of the above forces are equal, the aircraft is said to be in a state of equilibrium. For instance, when an aircraft is in level, unaccelerated 1.0 G flight, thrust and drag are equal, and lift and gravity (or weight plus aerodynamic downloads on the aircraft) are equal. Forces that act on any aircraft as the result of air resistance, friction, and other factors are:
(1) Thrust. The force required to counteract the forces of drag to move an aircraft in forward flight.
(2) Drag. The force that acts in opposition to thrust.
(3) Lift. The force that sustains the aircraft during flight.
(4) Gravity. The force that acts in opposition to lift.
h. Mach. Named after Ernst Mach, a 19th century Austrian physicist, Mach is the ratio of an aircraft’s true speed compared to the local speed of sound at a given time or place.
i. Mach Buffet. The airflow separation behind a shock wave pressure barrier caused by airflow over flight surfaces exceeding the speed of sound.
j. Mach (or Aileron) Buzz. A term used to describe a shock-induced flow separation of the boundary layer air before reaching the ailerons.
k. Mach Meter. An instrument designed to indicate Mach number. Mach-indicating capability is incorporated into the airspeed indicator(s) of current generation turbine-powered aircraft capable of Mach range speeds.
l. Mach Number (M). A decimal number (M) representing the true airspeed (TAS) relationship to the local speed of sound (e.g., TAS 75 percent (.75 M) of the speed of sound where 100 percent of the speed of sound is represented as Mach 1 (1.0 M)). The local speed of sound varies with changes in temperature.
m. Mach Speed. The ratio or percentage of the TAS to the speed of sound
(e.g., 1,120 feet (ft) per second (ft/s) (660 knots (kts)) at mean sea level (MSL)), represented by a Mach number.
Par 1-4 Page 3
n. Mach Tuck. The result of an aft shift in the center of pressure causing a nosedown pitching moment.
o. Maximum Operating Limit Speed (MMO) in Mach. An airplane’s maximum certificated Mach number. Any excursion past MMO, whether intentional or accidental, may cause induced flow separation of boundary layer air over the ailerons and elevators of an airplane and result in a loss of control surface authority and/or control surface buzz or snatch.
p. Maximum Operating Limit Speed (VMO) Expressed in Knots Calibrated Airspeed (KCAS). An airplane’s maximum operating limit speed. Exceeding VMO may cause aerodynamic flutter and G-load limitations to become critical during dive recovery. Structural design integrity is not predictable at velocities greater than VMO.
q. Q-Corner or Coffin Corner. A term used to describe operations at high altitudes where low IAS yield high TAS (as indicated by Mach number) at high angles of attack (AOA).
The high AOA results in flow separation, which causes buffet. Turning maneuvers at these altitudes increase the AOA and result in stability deterioration with a decrease in control effectiveness. The relationship of stall speed to the Mcr narrows to a point where sudden increases in AOA, roll rates, and/or disturbances (e.g., clear air turbulence) cause the limits of the airspeed envelope to be exceeded. Coffin corner exists in the upper portion of the maneuvering envelope for a given gross weight and G-force.
r. Service Ceiling. The maximum height above MSL at which an airplane can maintain a rate of climb of 100 ft per minute (ft/min) under normal conditions.
1-5. RELATED READING MATERIAL. The following documents provide additional information related to the subject of this AC.
• Airplane Flying Handbook (FAA-H-8083-3).
• Glider Flying Handbook (FAA-H-8083-13).
• Pilot’s Handbook of Aeronautical Knowledge (FAA-H-8083-25).
• Aeronautical Information Manual (AIM).
• Airplane Upset Recovery Training Aid.
1-6. WARNING, CAUTION, AND NOTE. This document uses “Warning,” “Caution,” and “Note” throughout to highlight different levels of importance of information provided. The list below defines them in order of decreasing severity or importance.
a. Warning. Explanatory information about an operating procedure, practice, condition, etc., that may result in injury or death if not carefully observed or followed.
b. Caution. Explanatory information about an operating procedure, practice, or condition, etc., that may result in damage to equipment if not carefully observed or followed.
c. Note. Explanatory information about an operating procedure, practice, or condition, etc.
Page 4 Par 1-7
1-7. BACKGROUND. On September 17, 1982, the National Transportation Safety Board (NTSB) issued a series of safety recommendations that included, among other things, the establishment of a minimum training curriculum for use at pilot schools covering pilots’ initial transition into General Aviation (GA) turbojet airplanes. Aerodynamics and physiological aspects of high-performance aircraft operating at high altitudes were among the subjects recommended for inclusion in this training curriculum. These recommendations were the result of an NTSB review of a series of fatal accidents that the NTSB believed to involve a lack of flightcrew knowledge and proficiency in GA turbojet airplanes operating in a high-altitude environment. Although the near-total destruction of physical evidence and the absence of installed flight recorders have inhibited investigators’ abilities to pinpoint the circumstances that led to these accidents, the NTSB is concerned that a lack of flightcrew knowledge and proficiency in the subject matter of this AC contributed to either the initial loss of control, or the inability to regain control of the aircraft, or both. A requirement has been added to part 61 for high-altitude training of pilots who transition to any pressurized airplane that has a service ceiling or maximum operating altitude, whichever is lower, above 25,000 ft MSL.
Recommended training in high altitude operations that would meet the requirements of this regulation can be found in Chapter 2. We are updating this AC to include strong emphasis on hypoxia awareness, time of useful consciousness, and recovery.
1-8. DISCUSSION.
a. Knowledge and Skill Requirements. Title 14 CFR Part 61 prescribes the knowledge and skill requirements for the various airman certificates and ratings, including category, class, and type ratings authorized to be placed thereon. The civil aircraft fleet consists of numerous aircraft capable of high-altitude flight. Certain knowledge elements of high-altitude flight are essential for the pilots of these aircraft. Pilots who fly in this realm of flight must receive training in the critical factors relating to safe flight operations at high altitudes. These critical elements include knowledge of the special physiological and/or aerodynamic considerations, which should be given to high-performance aircraft operating in the high-altitude environment. High-altitude flight has different effects on the human body than those experienced in lower altitude flight. The aircraft’s aerodynamic characteristics in high-altitude flight may differ significantly from those in lower altitude flight.
b. Training and Review. Pilots who are not familiar with operations in the high-altitude and high-speed environment are encouraged to obtain thorough and comprehensive training. This should include a checkout in complex high-performance aircraft before engaging in extensive high-speed flight, particularly at high altitudes. The training should enable the pilot to become thoroughly familiar with aircraft performance charts, aircraft systems and procedures. The pilot should also review the more critical elements of high-altitude flight planning and operations. The aircraft checkout should enable the pilot to demonstrate a comprehensive knowledge of the aircraft performance charts, systems, emergency procedures, and operating limitations, along with a high degree of proficiency in performing all flight maneuvers and in-flight emergency procedures. Knowledge of and skill in high-performance aircraft will enhance the pilot’s ability to transition to operating aircraft in the high-speed and high-altitude flight environment.
Par 2-1 Page 5 CHAPTER 2. RECOMMENDATIONS FOR HIGH-ALTITUDE TRAINING
2-1. PURPOSE. This chapter presents an outline for recommended high-altitude training that meets the requirements of § 61.31(g). The actual training, which may be derived from this outline, should include both ground and flight training in high-altitude operations. Upon completion of the ground and flight training, the flight instructor who conducted the training should certify that he or she gave training in high-altitude operations by providing an endorsement in the pilot’s logbook or training record. A sample high-altitude endorsement is available in the current edition of AC 61-65, Certification: Pilots and Flight and Ground Instructors.
a. Training Applicability. Note that § 61.31(g) applies only to pilots who fly pressurized airplanes with a service ceiling or maximum operating altitude above 25,000 ft MSL, whichever is lower. But we highly recommend it for all pilots who fly at altitudes above 10,000 ft MSL.
NOTE: All pressurized aircraft have a specified maximum operating altitude above which they must not operate. This maximum operating altitude is determined by flight, structural, powerplant, functional, or equipment characteristics. An airplane’s maximum operating altitude is limited to 25,000 ft MSL or lower, unless certain airworthiness standards are met. Maximum operating altitudes and service ceilings are specified in the Airplane Flight Manual (AFM).
b. Aircraft Applicability. The training outlined in this chapter is designed primarily for single-engine and light twin-engine airplanes that fly at high altitudes, but that do not require type ratings. The training should be incorporated into all training courses for aircraft that fly above 25,000 ft MSL if the pilot has not already received training in high-altitude flight. The training in this chapter is intended mainly for reciprocating engine and turboprop aircraft.
Therefore, it does not encompass high-speed flight factors such as acceleration, G-forces, Mach, and turbine systems. You can find information on high-speed flight in Chapter 3.
2-2. OUTLINE. This training covers the minimum information needed by pilots to operate safely at high altitudes. We encourage pilots to seek additional information specific to their operation.
a. Ground Training.
(1) The High-Altitude Flight Environment.
(2) Weather.
• The atmosphere.
• Winds and wind shear.
• Clear air turbulence.
• Clouds and thunderstorms.
• Icing.
Page 6 Par 2-2
(3) Flight Planning and Navigation.
• Flight planning.
• Weather charts.
• Navigation.
• Navigational Aids (NAVAID).
(4) Physiological Training.
• Physics of the atmosphere.
• Respiration.
• Trapped gas.
• Physiological problems at increased altitudes.
• Decompression in pressurized aircraft.
• Altitude chamber (optional).
• Physiology of flight video library.
(5) High-Altitude Systems and Components.
• Turbochargers.
• Oxygen and oxygen equipment.
• Pressurization systems.
• High-altitude components.
(6) Aerodynamics and Performance Factors.
• Air density.
• Knots true air speed (KTAS).
(7) Emergencies.
• Decompression.
• Turbocharger failure or malfunction.
• Vapor lock.
• In-flight fire.
• Flight through thunderstorm activity or severe turbulence.
b. Flight Training.
(1) Preflight Briefing.