1 Advisory Circular SUBJECT: Outdoor Laser Operations Date: 03/14/19 Initiated by: AJV- P2 AC No: 70-1A Change:
1. PURPOSE.
a. This A dvisory Circular (AC) provides information for those proponents planning to conduct outdoor laser operations that may affect aircraft operations in the National Airspace System (NAS).
Also, the AC explains why notification to the Federal Aviation Administration (FAA) is necessary, how to notify the FAA of the planned laser operation, and what action the FAA will take to respond to such notifications.
b. In additi on, to assist proponents in providing information to be used by the FAA in its review of outdoor laser operations, the AC includes:
• Appendix 1:
Notice of Proposed Outdoor Laser Operation(s) and Instructions;
Tables 1 & 2 M aximum Permissible Exposure Limits;
Tables 3 Correction Factors;
Graphic Examples and Descriptions of Airspace Flight Zones;
• Appe ndix 2: FAA Service Center Office Addresses;
• Appendix 3: Glossary.
c. The FAA’ s interest in these types of operations does not supersede or invalidate any existing rules or ordinances promulgated by other Federal, state, county, or local government. The proponent is responsible for compliance with these requirements.
2. AUTHORITY.
a. The FAA has the auth ority to regulate the safe and efficient use of the navigable airspace (Title 49 U.S.C., Sec tion 40103, Sov ereignty and Use of Airspace, and the Public Right of Transit.
3. EFFECTIVE DATE. This advisory circular becomes effective March 14, 2 019.
4. NOTIFICATION FORM.
a. Wh y is it necessary to notify the FAA?
(1 ) In recognition of the FAA’s role in promoting aviation safety, the FDA requires notice to the FAA as a condition of a variance for entertainment lasers operated outdoor s.
(
2) Early notice of the plan ned activity provides the FAA the opportunity to minimize the potentially hazardous adverse effects of laser operations on aircraft operators in the navigable airspace.
The possible visual effects are flash blindness and afterimage created when a laser beam interferes with the vision of the pilot or air crewmember, and glare when the laser beam illuminates the windshield of an aircraft.
(3) T he FAA recognizes that there are varied demands for the use of airspace, both by aviation and non-aviation int erests. While a sincere effort is made to find equitable solutions to conflicts over the use of this national resource, the FAA must give primary consideration to aviation operations.
b. Wh o should file a Notice?
A ny person/proponent who plans to conduct laser operations with visible beams exceeding 50 nW/cm2 or with non-visible beams that exceed the MPE in the navigable airspace should file notice with the FAA. Navigable airspace is airspace above the minimum altitudes of flight prescribed by regulations including airspace needed for the takeoff and landing of aircraft (49 U.S.C. Section 40102).
c. When should the Notice be Filed?
N otice should be filed at least 30 days before the planned event in order to allow the FAA sufficient time to accomplish an aeronautical study and make a determination regarding the planned activity.
d. Where to File the Notice?
N otice should be filed with the appropriate/applicable FAA Service Center. A list of service center addresses and the states they are responsible for is provided in Appendix 2.
e. What In formation sh ould be submitted to the FAA?
The F AA requests the proponent submit the following information:
(
1) A completed “Notice of Proposed Outdoor Laser Operation(s)” including a completed “Laser Configuration Worksheet” for each laser.
N ote: If proponent is utilizing an electronic protection system in lieu of safety observers, they must use Section 6 of FAA Form 7140-1 to certify that control measures meet the performance criteria in the SAE AS6029 (current edition).
(
2) Detailed diagrams depicting the planned laser paths.
U nited States Geological Survey quadrangle maps are available from:
3 U SGS National Center 12201 Sunrise Valley Drive Reston, Virginia 22092
(703) 648-5953 or U.S. Geological Survey Box 25046 Denver Federal Center Denver, Colorado 80225
(303) 202-4200
f. Wh at Action will the FAA take regarding this Information?
(
1) The Service Center must conduct an aeronautical review of all outdoor proposed laser operations, to be performed in the NAS, to ensure that these types of operations will not have a detrimental effect on air traffic control operations.
(2) T he aeronautical study determination will be provided in a Letter of Determination (LOD) to the proponent with respect to the laser activity’s effect on users of the navigable airspace.
5. RE LATED DOCUMENTS.
a.
TITLE 49 U.S.C., Subtitle VII, AVIATION PROGRAMS, Part A - (Air Commerce and Safety) & Part B - (Airport Development and Noise) b . FAA Order 7400.2, Procedures for Handling Airspace Matters.
c FDA 225-99-6000, Memorandum of Understanding between the Food and Drug Administration and the Federal Aviation Administration (available on the FDA CDRH web site).
d. 21 CFR Part 1010, Performance Standards for Electronic Products, and Part 1040, Performance Standards for Light Emitting Products.
e.
HHS Publication FDA 86-8262, Laser Light Show Safety – Who’s Responsibility? (Available on the FDA CDRH web site).
f.
American National Standards Institute (ANSI) Z136.1 & Z136.6 Laser standards.
g.
SAE International (SAE) Aerospace Standard, AS4970, Human Factors Considerations for Outdoor Laser Operations in the Navigable Airspace.
h.
SAE Aerospace Recommended Practice, ARP5290, Laser Beam Divergence Measurements Techniques Comparison.
i . SAE Aerospace Standard, AS6029, Performance Criteria for Laser Control Measures Used for Aviation Safety.
j. AC 70-2, Reporting of Laser Illumination of Aircraft.
6. PAPERWORK REDUCTION ACT STATEMENT.
a. Through u se of this AC, the FAA intends to maintain a high level of safety between laser operations and aircraft operations. The FAA is requesting that laser operators submit information on a voluntary basis using the form listed in this AC.
b. It will ta ke the proponent approximately 4 hours to provide the necessary information for the initial system an alysis. The time should decrease with subsequent submissions for the use of the same laser system by the same respondent. A person is not required to respond to an information collection request unless it displays a currently valid Office of Management and Budget (OMB) number. The OMB control number assigned to this request is 2120-0662.
//ORIGINAL SIGNED by Karen K. Gonzales f or Maurice Hoffman Director, Airspace Service, AJV-1
Appendix 1 5
A PPENDIX 1 F AA Form 4140-1, Notice of Proposed Outdoor Laser Operation(s) and Instructions T ables 1 and 2, Maximum Permissible Exposure Limits Table 3, Correction Factors Graphic Examples and Descriptions of Airspace Flight Zones
Appendix 1 6
Form Approved OMB No 2120-0662 Expiration Date: 08/31/2021
Please print or type on this form. Failure to provide all requested information may delay processing of your notice.
This area for FAA use only U.S. Department of Transportation Federal Aviation Administration NOTICE OF PROPOSED OUTDOOR LASER OPERATION(S)
1. GENERAL INFORMATION
(a) To: (FAA Service Center) (b) From: (Proponent)
(c) Event or facility (d) Report date
(e) Customer (f) Site address
2. DATE(S) AND TIME(S) OF LASER OPERATION
(a) Testing and alignment (b) Operation
3. BRIEF DESCRIPTION OF OPERATION
4. ON-SITE OPERATION INFORMATION
(a) Operator(s)
(b) On-site phone #1 (c) On-site phone #2
5. FDA CDRH LASER LIGHT SHOW VARIANCE (if applicable)
(a) Variance # (b) Accession # (c) Expiration date
6. BRIEF DESCRIPTION OF CONTROL MEASURES
7. ATTACHMENTS
(a) Number of laser configurations Fill out one copy of page 2 of this Notice (e.g., items 10-15 on the next page) for each configuration
(b) List additional attachments (including maps, diagrams, details of control measures, and details of calculations or software printouts)
8. DESIGNATED CONTACT PERSON (if further information is needed)
(a) Name (b) Position
(c) Phone (d) Fax (e) E-mail
9. STATEMENT OF ACCURACY To the best of my knowledge, the information provided in this Notice (both sides) and the attachment(s) is accurate and correct
(a) Name (if different from contact person) (b) Position
(c) Signature (d) Date FAA Form 7140- 1
Appendix 1 7 Form Approved OMB No 2120-0662 Expiration Date: 08/31/2021 Please print or type on this form. Failure to provide all requested information may delay processing of your notice.
This area for FAA use only
10. CONFIGURATION INFORMATION
(a) Configuration number of (b) Name of event/facility (c) Report date
(d) Brief description of configuration
11. GEOGRAPHIC LOCATION
(a) Site elevation (Mean Sea Level), in feet: (e) Latitude: degrees, minutes, seconds
(b) Laser height above site elevation (above ground level), in feet: (f) Longitude: degrees, _ minutes, seconds
(c) Overall laser elevation (a) + (b), in feet: Mean Sea Level (g) Horizontal datum: ☐NAD 27 ☐NAD 88
(d) Latitude and longitude determined by: ☐GPS ☐Map (quad) ☐Other (h) Vertical datum: ☐NGVD 29 ☐NAVD 88
12. BEAM CHARACTERISTICS AND CALCULATIONS (check one Mode of Operation only, and fill in only that column) MODE OF OPERATION ☐SINGLE PULSE ☐CONTINUOUS WAVE ☐REPETITIVELY PULSED 12(a) LASER AND BEAM CHARACTERISTICS Laser type (example: DPSS, sodium-vapor, etc.)
Laser hazard classification Power Watts (W) (not applicable) Maximum Power Average Power Pulse energy Joules (J) (not applicable) Pulse duration Seconds (s) (not applicable) Pulse repetition frequency Hertz (Hz) (not applicable) Beam diameter at 1/e points Centimeters (cm) Beam divergence 1/e at full angle Milliradians (mrad) Wavelength(s) Nanometers (nm) 12(b) MAXIMUM PERMISSIBLE EXPOSURE (MPE) VALUE (this will be used to calculate the NOHD) MPE Watts per square cm (W/cm2) (not applicable) MPE per pulse Joules per square cm (J/cm2) (not applicable) 12(c) VISUAL EFFECT CALCULATIONS The following items are for lasers with visible wavelengths (400-700 nm). If the laser has no visible wavelengths, enter “N/A (non- visible laser)” in all blocks.
Pre-Corrected Power (PCP) Watts (W) Pulse Energy (J) x 4 Maximum Power (from above) Pulse Energy (J) x PRF (Hz), or Average Power Visual Correction Factor (VCF) Enter “1.0” or use Table 3 Visually Corrected Power PCP x VCF
13. BEAM DIRECTION(S)
(a) Maximum elevation angle (degrees) (c) Magnetic variation (degrees)
(b) Minimum elevation angle (degrees, where horizontal = 0 degrees) (d) Azimuth (degrees) ☐True ☐Magnetic
14. PROTECTION DISTANCES (fill in all three columns below) SLANT RANGE (ft) HORIZONTAL DISTANCE (ft) VERTICAL DISTANCE (ft)
(a) NOHD (based on MPE value) The following items are for lasers with visible wavelengths (400-700 nm). If the laser has no visible wavelengths, enter “N/A (non -visible laser)” in all blocks.
(b) SZED (for 100 µW/cm2)
(c) CZED (for 5 µW/cm2)
(d) LFED (for 50 nW/cm2)
15. CALCULATION METHOD ☐Commercial software (print product name) ☐Other (describe method such as spreadsheet, calculator, etc.)
FAA Form 7140- 1
Appendix 1 8
INSTRUCTIONS FOR COMPLETING NOTICE OF
PROPOSED OUTDOOR LASER OPERATION(S) A single outdoor operation may have a number of lasers or “laser configurations” – power settings, wavelength, pulse modes, divergence, etc. In section 7.(a), of the Notice of Proposed Outdoor Laser Operations form, enter the number of different laser configurations for the outdoor operation. Then, complete one Laser Configuration Worksheet (page 3) for each different configuration.
T hrough use of the AC the FAA intends to maintain a high level of safety between laser operations and aircraft operations without regulating certain entities that were not previously regulated. The FAA is requesting that laser operators submit information on a voluntary basis by using the forms listed and enclosed in this AC.
It w ill ta ke the proponent approxim ately 10 hours to provide the necessary information for the initial system analysis. The ti me should decr ease with subsequent s ubmissions ba sed on use of the same laser system per respondent per request. A person is not required to respond to an information collection request un less it displays a currently valid Office of Management and Budget (OMB) control number. The OMB control number assigned to this request is 2121-0662.
Dat a sources: This form requires calculations based on data concerning the laser beams characteristics. The data can be obtained from direct measurement, manufacturer specifications, or specialized instruments. Also, data may be derived by making reasonable, conservative assumptions (e.g., that a certain value makes the beam more hazardous than it would be in reality). All data should err on the side of safety. In borderline situations where data accuracy is crucial to compliance, provide additional information on measurement techniques, data sources, and assumptions.
Al ternative analysis: This form and accompanying tables must cover a wide variety of l aser configurations.
They are nec essarily simplified, and they make conservative assumptions. Some laser configur ations may warrant a more complex analys is. Any such alternative analysis should be based on the Am erican National Standards Institute (ANSI) Z136 series of standards or ot her established methods. Both the methods and the calculations must be documented.
The information on this form will be used by the FAA Service Center to perform an aeronautical study to evaluate the safety of a proposed laser operation. Provide all information that may be needed to perform the study. If additional details are necessary, list these in the “ATTACHMENTS” section of this form.
1. G ENERAL INFORMATION - In 1.(a), enter the name, address, telephone, and fax numbers of the FAA Service Center responsible for the area which includes the laser operation site. (A list of Service Centers is available in APPENDIX 3 of this circular.) In 1.(b), enter the proponent's name, address, telephone, fax, and E- mail inform ation. This is the pa rty primaril y responsible for the laser safety of this oper ation. When the proponent is a manufacturer or a governmental agency (e.g., NASA), and the l aser is located at a different site, list the proponent here. In 1.(c), enter the event name (for temporary shows) or the facility name (for permanent in stallations). In 1.(d), enter the date the report is prepared or sent to FAA. It is not the date of the laser operation. - If the laser user is different than the proponent, f ill in section 1.(e) Customer; if not, enter “Same as proponent.” In 1.(f) enter the site address.
2 . DAT E(S) AND TIME(S) OF LASER OPERATION - Enter the dates and times of testing alignment proce dures, and operation.
3. B RIEF DESCRIPTION OF OPERATION - The description should be a general overview of the operation.
Specific laser configurations of the operation are described in detail using the Laser Configuration Worksheet on p age 2. If necessa ry, attach additional pages.
Appendix 1 9
Appe ndix 1
4. O N-SITE OPERATION INFORMATION - List names and/or titles of operators. There should be at least one working, direct telephone link to the operator, or equivalent way of quickly reaching the operator (e.g., t elephoning a central station that reaches operator via radio). Two telephone numbers are requested on the form;
the number in 2.(c) should be used as an alternate or backup.
5 . F DA CD RH LASER LIGHT SHOW VA RIANCE - List the variance number, accession number, and variance date if the operation uses or is a “demonstration laser” (generally, a laser light show) and therefore, is regulated by the Food and Drug Administration’s Center for Devices and Radiological Health.
6. B RIEF DESCRIPTION OF CONTROL MEASURES - Describe the method(s) used to protect airspace; for example, termination on a building (where the beam path is not accessible by aircraft including helicopters), use of observers, use of radar and imaging equipment, physical methods of limiting the beam path, etc. The more the operation relies on the control measures to ensure safety, the more detailed the description should be. If proponent is utilizing an electronic protection system in lieu of safety observers, they must use Section 6 to certify that control measures meet the performance criteria in the SAE AS6029 (current edition).
7. AT TACHMENTS – In 7.(a) list the number of “Laser Configurations” you are submitting with this notice. If a particular setup operates with more than one laser, with different beam characteristics (power settings, pulse modes, divergence, etc.) or has multiple output devices (example: projector heads), then each should be analyzed as a separate Laser Configuration. In 7.(b) list all additional attachments which are included to assist the FAA in sufficiently evaluating the proposal, such as maps, diagrams, and details of control measures.
8. D ESIGNATED CONTACT PERSON - Specify the person with whom the FAA will communicate if additional information is needed. This should be the per son most knowledgeable about laser safety of th is operation. Howev er, the person could also be the laser operation central contact that interfaces with the FAA.
The Designated Contact Person should work for or represent the proponent listed in 1.(b).
9 . S TATEMENT OF ACCURAC Y - The person having the author ity to bind the proponent must sign the form.
10 . CONFIGURATION INFORMATION – In 10.(a), enter the number of the specific configuration and the total number of configurations. In 10.(b), enter the name of the event or facility. In 10.(c), enter the date th e wo rksheet is prepared or sent to the FA A. In 10.(d), describe the be am projecting or di recting system. Inc lude a description of the s ite layout. Attach additional sheets if more space is required.
11. GEOGRAPHI C LOCATION – In 11.(a), enter the elevation of the site in feet above Mean Sea Level (MSL).
In 11.(b), enter the height of the laser above the site elevation. This value should reflect the total height including a ny tall structure or build ing on which the laser may be located. In 11.(c), enter the total hei ght of the laser above MSL (site elevation + height above site elevation). For aircraft or spacecraft operations, attach additional information on the flight locations and altitudes. In 11.(d) and (e), enter the latitude and longitude in degrees, minutes and seconds. Some maps or dev ices may give this information in “Degrees Decimal” form; convert this v alue into degrees, minutes, and seconds. In 11.(f), enter the method used to determine the la titude and longitude.
I n 11.(g), enter the hori zontal datum used to determine the latit ude and longitude. In 11.(h), enter the vertical datum used to determine the site elevation.
12. B EAM CHARACTERISTICS AND C ALCULATIONS - Determine the mode of operation for this configuration: single pulse, continuous wave, or repetitively pulsed. Check the appropriate column and fill out only the Beam Characteristics, MPE Calculations, and Visual Effect Calculations applicable to that column.
L aser Type/Classification - Enter the lasing medium, for example, “Argon,” “Nd-YAG,” “Copper-vapor," “CO2,” and the hazard classification for the laser.
Appendix 1 10 B eam Diameter and Divergence - Provide the diameter using the 1/e peak-irradiance points; be sure the diameter is entered in centimeters, not millimeters. The divergence is the full angle given at the 1/e points. If you know the diameter or divergence measured at the 1/e2 points instead, multiply by 0.707 t o convert to 1/e diameter or divergence.
N OTE - Diameter and div ergence m easurements can be complex; if nec essary, use conservative ( smaller diameter/smaller divergence) simplifications.
Wa velength - If the laser emits a single wavelength, enter this. If the laser emits multiple wavelengths, each wavelength should be analyzed separately to find the MPEs and NOHDs. There may be one wavelength that is most hazardous (e.g., MPE the smallest, and NOHD the largest) so that subsequent calculations can make a simplifying, conservative assumption by ignoring the less-hazardous wavelengths. For visible multiple-wavelength lasers, a simplifying, conservative assumption can be made when performing Visual Effect Calculations: that the entire beam has the same wavelength as the most visible wavelength (largest Visual Correction Factor). In all cases of multiple-wavelength lasers, you must document your methods and calculations. If you do not analyze all wavelengths in full, then you must explicitly state your simplifying, conservative assumptions.
Repetitivel y pulsed vs. scanning- “Repetitively pulsed” refers to lasers that naturally emit repetitive pulses, such as Q-switched lasers. The form and tables are not intended for analyzing pulses due to scanning the beam over a viewer or aircraft (examples: graphics or beam patterns used in laser displays; scanned patterns used for LIDAR). Pulses resulting from scanning are often extremely variable in pulse width and duration.
Therefore, for a conservative analysis, assume the beam is static (non-scanned). Should you rely on scanning to be in compliance, you must: 1) provide a more comprehensive analysis, documenting your methods and calculations, and 2) document and use scan-failure protection devices.
(
a) MAXIMUM PERMISSIBLE EX POSURE (MPE) CALCULATIONS - Provide the Maximum Permissible Exposure (MPE) calculation results in the applicable block. For convenience, a simplified, conservative method is provided in Tables 1 and 2 of this document. If you require less conservative levels, use the Am erican National Standards Institute (ANSI) Z136 series of standards or other established methods.
Bo th the methods and calculations must be documented. Unintentional exposure on aircraft is expected to be no m ore than 0.25 s due to natural relative motion between the beam and aircraft related to wind and other stabilization issues. The following analysis applies to laser wavelengths between 400 nm and 1050 nm for exposures less than 0.25 s. This analysis also provides conservative results for wavelengths from 1050 nm to 1400 nm . Additional analysis techniques can be found in the ANSI Z136 series of standards.
Sing le Pulse - Use Table 1 for lasers that produce a single pulse of energy with a pulse width < 0.25 seconds or a pulse repe tition frequency < 1 Hz. Fill in the “MPE per pulse” block in the Single Pulse column.
Continuous Wave (CW) - A laser that produces a continuous (non-pulsed) output for a period > 0.25 seconds is regarded as a CW laser. Use Table 2 to find the MPE. Fill in the “MPE” block in the Continuous Wave column.
R epetitively Pulsed - Pulsed lasers can produce hazards greater than CW lasers with the same average power. Lasers that produce recurring pulses of energy at a pulse repetition freq uency (PRF) greater than 13 kilohertz (kHz) for wavelengths from 400 to 1050 nm, or greater than 6.5 kHz for wavelengths between 1050 and 1400 nm, may be treated the same as CW lasers.
Appendix 1 11 Lasers with a PRF of 1 Hz or f aster are considered to be repetitively pulsed. These can produce an additional hazard above that of a single pulse or continuous wave laser. The MPE is adjusted for repetitively pulsed lasers based on its pulse repetition frequency and is designated as MPEPRF. The MPEPRF can be determined using either the per-pulse energy or the average power. This document provides a s implified method for calculating the MPEPRF for average power with wavelengths in the visible and infrared region. (ANSI Z136 series can provide a less conservative value in some cases.)
Although designated MPEPRF, the values should be placed in either the “MPE” or “MPE per pulse” blocks of the repetitively puls ed column. Following are the simplified methods for determining the MPEPRF for:
(
1) Ultraviolet wavelengths: Reference the American National Standards Institute ANSI Z136 series.
(
2) Visible and infrared wavelengths up to 1050 nm: For PRF greater than 13 kHz,use Table 2 to determine the MPE in W⋅cm-2. For PRF less than 13 kHz, use Table 1 to determine the MPE in J⋅cm- 2 Fill in the “MPE” block in the Repetitively Pulsed column.
(3) Infrared wavelengths from 1050 nm to 1400 nm: For PRF greater than 6.5 kHz, use Table 2 to determine the MPE in W⋅cm-2 . For PRF less than 6.5 kHz, use Table 1 to determine the MPE in J⋅cm-2 Fill in the appropriate “MPE” block in the Pulsed column, indicating whether the MPE is in J⋅cm-2 or in W⋅cm-2.
(
4) In frared wavelengths greater than 1400 nm: For repetitive pulse exposure at these wavelengths, a PRF of just a few hertz results in the CW MPE being more restrictive than the pulsed MPE. The MPE which indicates the greatest hazard determines the MPE. Fill in the appropriate “MPE” block in the Pulsed column, indicating whether the MPE is in J⋅cm-2 or in W⋅cm-2.
N OTE - For Repetitively Pulsed lasers. The simplified methods of Table 2 use the Average Power to determine the MPE in W/cm2. It is possible with other methods to use the Pulse Energy to determine the MPE per pulse in J/cm2. Only one of the two MPEs is required.
(b) V ISUAL EFFECT CALCULATIONS - If the laser has no wavelengths in the visible range (400- 700 nm), enter “N/A (non- visible laser)” in these blocks and go to the next section. For visible lasers, the FAA is concerned about beams that are eye-sa fe (below the MPE) but are bright enough to distract aircrews. The FAA has therefore established “Sensitive,” “Critical” and “Laser-Free” areas where aircraft should not be exposed to light above 100µW /cm2, 5µW /cm2, and 50nW/cm 2 respectively. Because apparent brightness varies with wavelength – green is more visible th an r ed or blue – a visual effect correction factor can be applied if desired. This has the effect of allowing more power for red and blue beams than for green beams. For any visible laser, you must submit Visual Effect Calculations:
Fir st, determine the Pre-Corrected Power.
(1) Single Pulse - Multiply the Pulse Energy (J) by 4, and enter in the form.
N OTE - This technique averages the pulse’s energy over the 0.25 sec maximum pulse duration, and is a conservative approximation of the visual effect of a pulse. If you use le ss conservative calculations, you must document your methods and calculations.
(2) C ontinuous Wave - Use the Average Power (W) block already entered on the form.
(3) R epetitively Pulsed - For repetitively pulsed lasers, it is necessary to determine the maximum number of pulses (MNP) that could occur in 0.25 s. MNP is determined by multiplying the PRF by 0.25 s and t hen rounding up to the next whole number. The Pre-Corrected Power is then the pulse energy multiplied by (4 x MNP).
Appendix 1 12 Next, d ecide on how precise you want to be:
F or the simplest, most conservative anal ysis - Assume no correction factor at al l, enter “1.0 (assumed)” for the Visual Correction Factor, and the Pre-Corrected Power found above for the Visually Corrected Power.
F or a single-wavelength beam use Table 3 to find the Visual Correction Factor. Multiply this by the Pre- Corrected Power to find the Visually Corrected Power.
F or a beam with multiple wavelengths, choose one method:
a. Make a simplifying, conservative assumption. Use Table 3 to determine which wavelength has t he largest Visual Correction Factor (is the most visible). Multiply this Visual Correction Factor by the Pre-Corrected Power of the laser (all wavelengths) to find the V isually Corrected Power.
N OTE - You must attach data and c alculations showing how you arriv ed at the Visually Corrected Power.
b. Analyze each wavelength separately, then sum them. First, determine the Pre-Corrected Power for each wavelength. Next, use Table 3 to find the Visual Correction Factor for each wavelength. Multiply each wavelength’s Pre-Corrected Power by its Visual Correction Factor, to find the Visually Corrected Power (VCP) for that wavelength. Add all the VCPs together to determine the total VCP. Enter the total VCP in the “Visually Corrected Power” block of the form.
N OTE – You must attach data and calculations showing how you arrived at the Visually Corrected Power.
13 . B EAM DIRECTION(S) – Enter the maximum and minimum elevation angles. Also, provide the pointing directions and elev ation angles (m inimum and maximum) of the beam projections for this configuration only:
If the beam is moved horizontally during the operation, enter the movement range under “Azimuth.” For example, “20° to 50°.” Make sure you give the range going clockwise, otherwise y our data wi ll be interpreted as dir ecting the beam everywhere bu t where you intend. Specify if a zimuth is in true or magnetic readings. Provide the magnetic variation for the location if this is known (this must be done if you mark the “ Magnetic” check box or if you are using a compass as part of your control measures).
Fo r some configurations, additional information concerning the beam dire ction may be needed. For example, lasers that are very widely separated at the Geographic Location listed on page 2 of the Notice Of Proposed Outdoor Laser Operation(S) form or a laser used on an aircraft or spacecraft which is moving and/or shoots downward.
14. P ROTECTION DISTANCES (From above data) - There are four protection distances that are important in evaluating the safety of outdoor operations. The NOHD is based on the risk of a permanent injury to the eye and the other three distances are related to temporary visual effects that could interfere with a person’s performance of critical tasks. Brief definitions of these distances are as follows:
N ominal Ocular Hazard Distance (NOHD) - The beam is an eye hazard (is above the MPE), from the laser source to this distance.
S ensitive Zone Exposure Distance (SZED) - The beam is bright enough to cause temporary vision impairment, from the source to this distance. Beyond this distance, the beam is 100µW/cm2 or less.
C ritical Zone Exposure Distance (CZED) - The beam is bright enough to cause a distraction interfering with critical task performance, from the source to this distance. Beyond this distance, the beam is 5 µW/cm2 or less.