- Effective
- April 5, 2002
- Published
- March 1, 2002 · 67 FR 9395–9396
- Issued
- February 21, 2002
- Models
- 737-600 Series, 737-700 Series, 737-700C Series, 737-800 Series
- Data sheet
- TCDSA16WE
- Registered aircraft
- 771 matched by model
- Product
- Aircraft · Large airplane
- Amendment
- 39-12665
- Docket
- 2001-NM-37-AD
- Issued as
- Final rule
Unofficial copy from the Federal Register XML, document 02-4717. Only the govinfo PDF is the legal edition. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| Official PDF | 133 KB | cf7aa2a3…596a58b | 02-4717.pdf on govinfo.gov |
| Federal Register XML | 14 KB | 0ea895c3…96c4e7f | 02-4717.xml on federalregister.gov |
| FAA DRS HTML attachment | 46 KB | d7b3ed59…e8bac13 | FAA DRS (API key needed) |
| FAA DRS PDF | 28 KB | afe425a8…b640a19 | FAA DRS (API key needed) |
On this page
Summary
This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 737-600, -700, -700C, and -800 series airplanes, that requires a one-time inspection of certain fasteners in rudder pedal housings to determine if pan-head fasteners are installed, and replacement of existing fasteners with improved fasteners, if necessary. The actions specified by this AD are intended to prevent loss of free movement of the rudder pedals, which could result in reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
The airworthiness directive
2002-04-08 Boeing: Amendment 39-12665. Docket 2001-NM-37-AD.
Applicability: Model 737-600, -700, -700C, and -800 series airplanes; line numbers 1 through 295 inclusive; certificated in any category.
Note 1:
This AD applies to each airplane identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (b) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it.
Compliance: Required as indicated, unless accomplished previously.
To prevent loss of free movement of the rudder pedals, which could result in reduced controllability of the airplane, accomplish the following:
(a) Replacement of Fasteners
PDF page 2(a) Within 12 months after the effective date of this AD, do a one-time general visual inspection of the fasteners on the upper cover assembly of the housing for the captain's and first officer's rudder pedals to determine if pan-head fasteners are installed, according to Boeing Alert Service Bulletin 737-25A1383, Revision 1, dated December 2, 1999. Replace all pan-head fasteners on the upper cover assembly of the housing for the captain's and first officer's rudder pedals with improved (flush-head) fasteners, including countersink-drilling the fastener holes, according to the service bulletin.
Note 2:
For the purposes of this AD, a general visual inspection is defined as: “A visual examination of an interior or exterior area, installation, or assembly to detect obvious damage, failure, or irregularity. This level of inspection is made under normally available lighting conditions such as daylight, hangar lighting, flashlight, or drop-light, and may require removal or opening of access panels or doors. Stands, ladders, or platforms may be required to gain proximity to the area being checked.”
(b) Alternative Methods of Compliance
PDF page 2(b) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, Seattle Aircraft Certification Office (ACO), FAA. Operators shall submit their requests through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Seattle ACO.
Note 3:
Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Seattle ACO.
(c) Special Flight Permits
PDF page 2(c) Special flight permits may be issued in accordance with §§ 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished.
(d) Incorporation by Reference
PDF page 2(d) The actions shall be done in accordance with Boeing Alert Service Bulletin 737-25A1383, Revision 1, dated December 2, 1999. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from Boeing Commercial Airplane Group, P.O. Box 3707, Seattle, Washington 98124-2207. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
(e) Effective Date
PDF page 2(e) This amendment becomes effective on April 5, 2002.
Rule preamble
The FAA’s background, reasoning and cost estimate, published with the AD.
DatesPage 1
Effective April 5, 2002.
The incorporation by reference of certain publications listed in the regulations is approved by the Director of the Federal Register as of April 5, 2002.
AddressesPage 1
The service information referenced in this AD may be obtained from Boeing Commercial Airplane Group, P.O. Box 3707, Seattle, Washington 98124-2207. This information may be examined at the Federal Aviation Administration (FAA), Transport Airplane Directorate, Rules Docket, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
For further information contactPage 1
Barbara Mudrovich, Aerospace Engineer, Systems and Equipment Branch, ANM-130S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 227-2983; fax (425) 227-1181.
Supplementary informationPage 1
A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an airworthiness directive (AD) that is applicable to certain Boeing Model 737-600, -700, -700C, and -800 series airplanes was published in the Federal Register on November 27, 2001 (66 FR 59183). That action proposed to require a one-time inspection of certain fasteners in rudder pedal housings to determine if pan-head fasteners are installed, and replacement of existing fasteners with improved fasteners, if necessary.
CommentsPage 1
Interested persons have been afforded an opportunity to participate in the making of this amendment. No comments were submitted in response to the proposal or the FAA's determination of the cost to the public.
ConclusionPage 1
The FAA has determined that air safety and the public interest require the adoption of the rule as proposed.
Cost impactPage 1
There are approximately 264 airplanes of the affected design in the worldwide fleet. The FAA estimates that 123 airplanes of U.S. registry will be affected by this AD, that it will take approximately 1 work hour per airplane to accomplish the required inspection, and that the average labor rate is $60 per work hour. Based on these figures, the cost impact of the AD on U.S. operators is estimated to be $7,380, or $60 per airplane.
The cost impact figure discussed above is based on assumptions that no operator has yet accomplished any of the requirements of this AD action, and that no operator would accomplish those actions in the future if this AD were not adopted. The cost impact figures discussed in AD rulemaking actions represent only the time necessary to perform the specific actions actually required by the AD. These figures typically do not include incidental costs, such as the time required to gain access and close up, planning time, or time necessitated by other administrative actions.
Should an operator be required to accomplish the replacement of fasteners, it will take approximately 2 work hours per airplane to accomplish the repair, at an average labor rate of $60 per work hour. Required parts will be provided by the manufacturer at no cost to the operator. Based on these figures, the cost impact of any repair action is estimated to be $120 per airplane.
Regulatory impactPage 2
The regulations adopted herein will not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, it is determined that this final rule does not have federalism implications under Executive Order 13132.
For the reasons discussed above, I certify that this action (1) is not a “significant regulatory action” under Executive Order 12866; (2) is not a “significant rule” under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A final evaluation has been prepared for this action and it is contained in the Rules Docket. A copy of it may be obtained from the Rules Docket at the location provided under the caption ADDRESSES.
Adoption of the amendmentPage 2
Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:
1. The authority citation for part 39 continues to read as follows:
2. Section 39.13 is amended by adding the following new airworthiness directive:
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 771
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.
| 1998 | 38 |
|---|---|
| 1999 | 86 |
| 2000 | 72 |
| 2001 | 73 |
| 2002 | 10 |
| 2003 | 7 |
| 2004 | 13 |
| 2005 | 14 |
| 2006 | 21 |
| 2007 | 21 |
| 2008 | 26 |
| 2009 | 38 |
| 2010 | 62 |
| 2011 | 21 |
| 2012 | 30 |
| 2013 | 31 |
| 2014 | 23 |
| 2015 | 20 |
| 2016 | 42 |
| 2017 | 72 |
| 2018 | 27 |
| 2025 | 2 |
22 with no year recorded