OpenAirDocs.org

AD 2006-16-18 R1

Open the Markdown

Airworthiness directive · Installing a warning placard on the TAWS/RMI · Airbus A300 B2-1A, A300 B2-1C, A300 B2-203 and 100 more

Open in Federal RegisterOpen in FAA DRSDocket on regulations.gov

Official PDF· 3 pages, 157 KB
Download from govinfo.gov
AboutSource files 4
Effective
July 18, 2008
Published
June 13, 2008 · 73 FR 33663–33665
Issued
June 3, 2008
Supersedes
AD2006-16-18
Models
A300 B2-1A, A300 B2-1C, A300 B2-203, A300 B2K-3C, A300 B4-103, A300 B4-203 and 97 more
Data sheets
TCDSA16WETCDSA20WETCDSA35EU30 more
Registered aircraft
11,796 matched by model
Product
Appliance
Amendment
39-15557
Docket
FAA-2007-0290
Project
2007-NM-250-AD
Issued as
Final rule

Unofficial copy from the Federal Register XML, document E8-13165. Only the govinfo PDF is the legal edition. DRS record last changed November 21, 2025.

On this page

Summary

The FAA is revising an existing airworthiness directive (AD) that applies to Sandel Avionics Incorporated Model ST3400 TAWS/RMI units as described above. The existing AD currently requires installing a warning placard on the TAWS/RMI and revising the Limitations section of the airplane flight manual (AFM). The existing AD also requires installing upgraded software in the TAWS/RMI. This new AD allows installing later revisions of the software described in the existing AD. This AD results from a report that an in-flight bearing error occurred in a Model ST3400 TAWS/RMI configured to receive bearing information from a very high frequency omnidirectional range (VOR) receiver interface via a composite video signal, due to a combination of input signal fault and software error. We are issuing this AD to prevent a bearing error, which could lead to an airplane departing from its scheduled flight path, which could result in a reduction in separation from, and a possible collision with, other aircraft or terrain.

The airworthiness directive

2006-16-18 R1 Sandel Avionics Incorporated: Amendment 39-15557. Docket No. FAA-2007-0290; Directorate Identifier 2007-NM-250-AD.

(a) Effective Date

PDF page 1

(a) This airworthiness directive (AD) is effective July 18, 2008.

(b) Affected ADs

PDF page 1

(b) This AD revises AD 2006-16-18.

(c) Applicability

PDF page 1

(c) This AD applies to Sandel Avionics Incorporated (Sandel) Model ST3400 terrain awareness warning system/radio magnetic indicator (TAWS/RMI) units approved under Technical Standard Order(s) C113, C151a, or C151b; as identified in Sandel ST3400 Service Bulletin SB3400-01, Revision B, dated September 15, 2004; as installed on various small and transport category airplanes, certificated in any category, including, but not limited, to the airplane models listed in Table 1 of this AD.

Table 1.—Manufacturers/Airplane Models
ManufacturerAirplane model(s)
AirbusA300.
Avions Marcel Dassault-Breguet Aviation (AMD/BA)Falcon 10.
Boeing727, 737, 747.
Bombardier (LearJet)24, 35, 36, 55.
British Aerospace (Operations) LimitedJetstream Series 3101.
Cessna208, 208B, 421C; 501, 525, 550, 560, 650, S550.
EmbraerEMB-120.
Dassault-AviationMystere-Falcon 50, Mystere-Falcon 200.
GulfstreamG-I, G-1159A (G-III)
Israel Aircraft Industries (IAI)1124, 1125 Westwind Astra.
McDonnell DouglasDC-10.
PiperPA-31T2.
Raytheon58; 1900D, 400; A36; BAe.125 Series 800A; HS.125 Series 600A/700A; Hawker 800-XP; 200, 300, 350; A200, B100, B200, B300, C90, C90A, C90B, E90, F90; MU-300-10.
Sabreliner60 (NA-265-60).
Twin Commander500-A, 695A.
Viking Air LimitedDHC-6.

(d) Unsafe Condition

PDF page 1

(d) This AD results from a report that an in-flight bearing error occurred in a Model ST3400 TAWS/RMI unit configured to receive bearing information from a very high frequency omnidirectional range (VOR) receiver interface via a composite video signal, due to a combination of input signal fault and software error. We are issuing this AD to prevent a bearing error, which could lead to an airplane departing from its scheduled flight path, which could result in a reduction in separation from, and a possible collision with, other aircraft or terrain.

(e) Compliance

PDF page 1

(e) You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.

(f) Installing Placard

PDF page 1

(f) Within 14 days after September 25, 2006 (the effective date of AD 2006-16-18): Install a placard on the TAWS/RMI which states, “NOT FOR PRIMARY VOR NAVIGATION,” in accordance with Sandel ST3400 Service Bulletin SB3400-01, Revision B, dated September 15, 2004.

(g) Revising Airplane Flight Manual (AFM)

PDF page 1

(g) Within 14 days after September 25, 2006: Revise the Limitations section of the applicable AFM to include the following statement: “Use of ST3400 TAWS/RMI for primary VOR navigation is prohibited unless the indicator has 3.07 or A3.06 software or later.” This may be done by inserting a copy of this AD into the AFM.

(h) Updating Software

PDF page 1

(h) Within 90 days after September 25, 2006, in accordance with Sandel ST3400 Service Bulletin SB3400-01, Revision B, dated September 15, 2004: Field-load the TAWS/RMI with updated software having revision 3.07 (for units having serial numbers (S/Ns) under 2000) or revision A3.06 (for units having S/Ns 2000 and subsequent). Revisions of software later than revision 3.07 or A3.06, as applicable, are considered acceptable for compliance with the requirements of this paragraph. The placard and AFM limitations revision installed as required by paragraphs (f) and (g) of this AD may be removed after the software upgrade required by paragraph (h) of this AD has been accomplished.

(i) Parts Installation

PDF page 1

(i) As of 90 days after September 25, 2006, no person may install, on any airplane, a Model ST3400 TAWS/RMI unit, unless it has been modified in accordance with Sandel ST3400 Service Bulletin SB3400-01, Revision B, dated September 15, 2004.

(j) Alternative Methods of Compliance (AMOCs)

PDF page 1

(j)(1) The Manager, Los Angeles Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested in accordance with the procedures found in 14 CFR 39.19.

(2) To request a different method of compliance or a different compliance time for this AD, follow the procedures in 14 CFR 39.19. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO.

(k) Material Incorporated by Reference

PDF page 1

(k) You must use Sandel ST3400 Service Bulletin SB3400-01, Revision B, dated September 15, 2004, to do the actions required by this AD, unless the AD specifies otherwise.

(1) The Director of the Federal Register previously approved the incorporation by reference of Sandel ST3400 Service Bulletin SB3400-01, Revision B, dated September 15, 2004 on September 25, 2006 (71 FR 48461, August 21, 2006).

(2) For service information identified in this AD, contact Sandel Avionics Incorporated (Sandel), 2401 Dogwood Way, Vista, California, 92081.

(3) You may review copies of the service information that is incorporated by reference at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

Rule preamble

The FAA’s background, reasoning and cost estimate, published with the AD.

DatesPage 1

This AD is effective July 18, 2008.

On September 25, 2006 (71 FR 48461, August 21, 2006), the Director of the Federal Register approved the incorporation by reference of Sandel ST3400 Service Bulletin SB3400-01, Revision B, dated September 15, 2004.

AddressesPage 1

For service information identified in this AD, contact Sandel Avionics Incorporated (Sandel), 2401 Dogwood Way, Vista, California 92081.

For further information contactPage 1

Ha A. Nguyen, Aerospace Engineer, Systems and Equipment Branch, ANM-130L, FAA, Los Angeles Aircraft Certification Office, 3960 Paramount Boulevard, Lakewood, California 90712-4137; telephone (562) 627-5335; fax (562) 627-5210.

DiscussionPage 1

The FAA proposed to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) with an airworthiness directive (AD) to revise AD 2006-16-18, amendment 39-14718 (71 FR 48461, August 21, 2006). The existing AD applies to Sandel Avionics Incorporated (Sandel) Model ST3400 terrain awareness warning system/radio magnetic indicator (TAWS/RMI) units approved under Technical Standard Order(s) C113, C151a, or C151b; as installed on various small and transport category airplanes. The proposed AD was published in the Federal Register on March 13, 2008 (73 FR 13498) to require installing a warning placard on the TAWS/RMI, revising the Limitations section of the airplane flight manual (AFM), and installing upgraded software in the TAWS/RMI.

CommentsPage 1

We provided the public the opportunity to participate in the development of this AD. We received no comments on the NPRM or on the determination of the cost to the public.

ConclusionPage 1

We have carefully reviewed the available data and determined that air safety and the public interest require adopting the AD as proposed.

Costs of CompliancePage 1

This AD describes the installation of later revisions of software than those specified in AD 2006-16-18; however, this change imposes no new costs on operators. Costs are repeated here for operator convenience only.

This AD affects about 300 airplanes of U.S. registry. The actions take about 1 work hour per airplane, at an average labor rate of $80 per work hour. Based on these figures, the estimated cost of the AD for U.S. operators is $24,000, or $80 per airplane.

Authority for This RulemakingPage 1

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, Section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701, “General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory findingsPage 1

We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866;

(2) Is not a “significant rule” under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

We prepared a regulatory evaluation of the estimated costs to comply with this AD and placed it in the AD docket. See the ADDRESSES section for a location to examine the regulatory evaluation.

Adoption of the amendmentPage 1

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

1. The authority citation for part 39 continues to read as follows:

2. The Federal Aviation Administration (FAA) amends § 39.13 by removing amendment 39-14718 (71 FR 48461, August 21, 2006) and adding the following new airworthiness directive (AD):

Affected TCDS · 33

The type certificate data sheets for the models this AD names, matched by model and maker.

TCDS A16WEThe Boeing CompanyNames 12 of 17 models: 737-500 Series, 737-900 Series, 737-100 Series and 9 moreTCDS A20WEThe Boeing CompanyNames 12 of 14 models: 747-100B Series, 747SP Series, 747-400D Series and 9 moreTCDS A35EUAirbus SASNames 9 of 17 models: A300 B4-622R, A300 F4-605R, A300 B4-601 and 6 more
See all 33 data sheets

Registered aircraft · 11,796

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Beech4,457
  • Cessna2,821
  • Raytheon1,507
  • Boeing1,268
  • Textron673
  • Other makers341,070
By year built
19472026

1,584 with no year recorded

By model

See all 183 models

Aircraft

N100AGDodson Intl Parts Inc · Rantoul, KSBuilt 2005 · S/N 258747N100AZNnww Holdings LLC · San Angelo, TXS/N 421C1051N100BEBemis Manufacturing Co · Sheboygan Falls, WIBuilt 2004 · S/N FL-403
See all 11,796 aircraft