- Effective
- June 30, 2016
- Published
- May 26, 2016 · 81 FR 33368–33371
- Issued
- May 12, 2016
- Supersedes
- AD2015-03-06
- Models
- A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243 and 18 more
- Registered aircraft
- 119 matched by model
- Product
- Aircraft · Large airplane
- ATA chapter
- 57 · Wings
- Amendment
- 39-18522
- Docket
- FAA-2015-4815
- Project
- 2015-NM-112-AD
- Issued as
- Final rule
Unofficial copy from the Federal Register XML, document 2016-11931. Only the govinfo PDF is the legal edition. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| Official PDF | 239 KB | 2cfedbb9…b5e7896 | 2016-11931.pdf on govinfo.gov |
| Federal Register XML | 30 KB | 0b767ce8…a6ab493 | 2016-11931.xml on federalregister.gov |
| FAA DRS HTML attachment | 88 KB | a03f6a5e…1ba554a | FAA DRS (API key needed) |
| FAA DRS PDF | 71 KB | 04d0d822…2555788 | FAA DRS (API key needed) |
On this page
Summary
We are superseding Airworthiness Directive (AD) 2015-03-06 for all Airbus Model A330-200, A330-200 Freighter, A330-300, A340-200, A340-300, A340-500, and A340-600 series airplanes. AD 2015-03-06 required repetitive inspections of the left-hand (LH) and right-hand (RH) wing main landing gear (MLG) rib 6 aft bearing lugs (forward and aft) to detect any cracks on the two lugs, and replacement if necessary. This new AD requires reduction of certain compliance times. This AD was prompted by reports of additional cracking of the MLG rib 6 aft bearing lugs. We are issuing this AD to detect and correct cracking of the MLG rib 6 aft bearing lugs, which could result in collapse of the MLG upon landing.
The airworthiness directive
2016-10-11 Airbus: Amendment 39-18522; Docket No. FAA-2015-4815; Directorate Identifier 2015-NM-112-AD.
(a) Effective Date
PDF page 3This AD is effective June 30, 2016.
(b) Affected ADs
PDF page 3This AD replaces AD 2015-03-06, Amendment 39-18102 (80 FR 8511, February 18, 2015) (“AD 2015-03-06”).
(c) Applicability
PDF page 3This AD applies to Airbus Model A330-201, -202, -203, -223, -223F, -243, -243F -301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes; and Model A340-211, -212, -213 -311, -312, -313, -541, and -642 airplanes; certificated in any category; all manufacturer serial numbers.
(d) Subject
PDF page 3Air Transport Association (ATA) of America Code 57, Wings.
(e) Reason
PDF page 3This AD was prompted by reports of cracking of the main landing gear (MLG) rib 6 aft bearing forward lug. We are issuing this AD to detect and correct cracking of the MLG rib 6 aft bearing lugs, which could result in collapse of the MLG upon landing.
(f) Compliance
PDF page 3Comply with this AD within the compliance times specified, unless already done.
(g) Inspections
PDF page 3At the later of the times specified in paragraphs (g)(1) and (g)(2) of this AD: Do a detailed inspection for cracking of the left-hand and right-hand wing MLG rib 6 aft bearing lugs (forward and aft), in accordance with the Accomplishment Instructions of Airbus Service Bulletin A330-57-3096, Revision 06, dated May 29, 2015 (for Model A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes); Airbus Service Bulletin A340-57-4104, Revision 04, dated October 17, 2013 (for Model A340-211, -212, -213, -311, -312, -313 airplanes); or Airbus Service Bulletin A340-57-5009, Revision 03, dated October 17, 2013 (for Model A340-541 and -642 airplanes).
(1) Within 24 months or 2,000 flight cycles, whichever occurs first since airplane first flight or since the last MLG support rib replacement, as applicable.
(2) Within 30 days after the effective date of this AD.
(h) Repetitive Inspections
PDF page 3Repeat the inspection required by paragraph (g) of this AD thereafter at the time specified in paragraphs (h)(1) through (h)(7) of this AD, as applicable.
(1) For Model A330-201, -202, -203, -223, and -243 airplanes: Repeat the inspections at intervals not to exceed 300 flight cycles or 1,500 flight hours, whichever occurs first.
(2) For Model A330-223F and -243F airplanes: Repeat the inspections at intervals not to exceed 300 flight cycles or 900 flight hours, whichever occurs first.
(3) For Model A330-301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes: Repeat the inspections at intervals not to exceed 300 flight cycles or 900 flight hours, whichever occurs first.
(4) For Model A340-211, -212, and -213 airplanes: Repeat the inspections at intervals not to exceed 200 flight cycles or 800 flight hours, whichever occurs first.
(5) For Model A340-311 and -312 airplanes; and Model A340-313 airplanes (except weight variant (WV) 27): Repeat the inspections at intervals not to exceed 200 flight cycles or 800 flight hours, whichever occurs first.
(6) For Model A340-313 (only WV27) airplanes: Repeat the inspections at intervals not to exceed 200 flight cycles or 400 flight hours, whichever occurs first.
(7) For Model A340-541 and -642 airplanes: Repeat the inspections at intervals not to exceed 100 flight cycles or 500 flight hours, whichever occurs first.
(i) Corrective Action
PDF page 3If any crack is found during any inspection required by paragraph (g) or (h) of this AD: Before further flight, replace the cracked MLG support rib using a method approved by the Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA; or the European Aviation Safety Agency (EASA); or Airbus's EASA Design Organization Approval (DOA). Replacement of an MLG support rib does not terminate the repetitive inspections required by paragraph (h) of this AD.
(j) Credit for Previous Actions
PDF page 4This paragraph provides credit for actions required by paragraphs (g) and (h) of this AD, if those actions were performed before the effective date of this AD using the applicable service information identified in paragraphs (j)(1) through (j)(15) of this AD.
(1) Airbus Service Bulletin A330-57A3096, dated December 5, 2006, which was incorporated by reference in AD 2007-03-04, Amendment 39-14915 (72 FR 4416, January 31, 2007) (“AD 2007-03-04”).
(2) Airbus Service Bulletin A330-57A3096, Revision 01, dated April 18, 2007, which is not incorporated by reference in this AD.
(3) Airbus Service Bulletin A330-57-3096, Revision 02, dated August 13, 2007, which was incorporated by reference in AD 2007-22-10, Amendment 39-15246 (72 FR 61796, November 1, 2007; corrected November 16, 2007 (72 FR 64532)) (“AD 2007-22-10”).
(4) Airbus Service Bulletin A330-57-3096, Revision 03, dated October 24, 2012, which is not incorporated by reference in this AD.
(5) Airbus Service Bulletin A330-57-3096, Revision 04, dated February 6, 2013, which is not incorporated by reference in this AD.
(6) Airbus Service Bulletin A330-57-3096, Revision 05, dated October 17, 2013, which was incorporated by reference in AD 2015-03-06.
(7) Airbus Service Bulletin A340-57A4104, dated December 5, 2006, which was incorporated by reference in AD 2007-03-04.
(8) Airbus Service Bulletin A340-57-4104, Revision 01, dated August 13, 2007, which is not incorporated by reference in this AD.
(9) Airbus Service Bulletin A340-57-4104, Revision 02, dated September 5, 2007, which was incorporated by reference in AD 2007-22-10.
(10) Airbus Service Bulletin A340-57-4104, Revision 03, dated October 24, 2012, which is not incorporated by reference in this AD.
(11) Airbus Service Bulletin A340-57A5009, dated December 5, 2006, which was incorporated by reference in AD 2007-03-04.
(12) Airbus Service Bulletin A340-57-5009, Revision 01, dated August 13, 2007, which was incorporated by reference in AD 2007-22-10.
(13) Airbus Service Bulletin A340-57-5009, Revision 02, dated October 24, 2012, which is not incorporated by reference in this AD.
(14) Airbus Alert Operators Transmission A57L005-14, dated July 15, 2014, which is not incorporated by reference in this AD.
(15) Airbus Alert Operators Transmission A57L005-14, Revision 01, dated August 20, 2014, which is not incorporated by reference in this AD.
(k) Other FAA AD Provisions
PDF page 4The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Branch, send it to ATTN: Vladimir Ulyanov, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone 425-227-1138; fax 425-227-1149. Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. The AMOC approval letter must specifically reference this AD.
(2) Contacting the Manufacturer: As of the effective date of this AD, for any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA; or the EASA; or Airbus's EASA DOA. If approved by the DOA, the approval must include the DOA-authorized signature.
(3) Required for Compliance (RC): If any service information contains procedures or tests that are identified as RC, those procedures and tests must be done to comply with this AD; any procedures or tests that are not identified as RC are recommended. Those procedures and tests that are not identified as RC may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC, provided the procedures and tests identified as RC can be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to procedures or tests identified as RC require approval of an AMOC.
(l) Related Information
PDF page 4(1) Refer to Mandatory Continuing Airworthiness Information (MCAI) EASA Airworthiness Directive 2015-0120, dated June 26, 2015, for related information. This MCAI may be found in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-4815.
(2) Service information identified in this AD that is not incorporated by reference is available at the addresses specified in paragraphs (m)(5) and (m)(6) of this AD.
(m) Material Incorporated by Reference
PDF page 4(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(3) The following service information was approved for IBR on June 30, 2016.
(i) Airbus Service Bulletin A330-57-3096, Revision 06, dated May 29, 2015.
(ii) Reserved.
(4) The following service information was approved for IBR on March 25, 2015 (80 FR 8511, February 18, 2015).
(i) Airbus Service Bulletin A340-57-4104, Revision 04, dated October 17, 2013.
(ii) Airbus Service Bulletin A340-57-5009, Revision 03, dated October 17, 2013.
(5) For service information identified in this AD, contact Airbus SAS, Airworthiness Office—EAL, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; email airworthiness.A330-A340@airbus.com; Internet http://www.airbus.com.
(6) You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.
(7) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.
Rule preamble
The FAA’s background, reasoning and cost estimate, published with the AD.
DatesPage 1
This AD is effective June 30, 2016.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of June 30, 2016.
The Director of the Federal Register approved the incorporation by reference of certain other publications listed in this AD as of March 25, 2015 (80 FR 8511, February 18, 2015).
AddressesPage 1
For service information identified in this final rule, contact Airbus SAS, Airworthiness Office—EAL, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; email airworthiness.A330-A340@airbus.com; Internet http://www.airbus.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-4815.
For further information contactPage 2
Vladimir Ulyanov, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone 425-227-1138; fax 425-227-1149.
DiscussionPage 2
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2015-03-06, Amendment 39-18102 (80 FR 8511, February 18, 2015) (“AD 2015-03-06”). AD 2015-03-06 applied to all Airbus Model A330-200, A330-200 Freighter, A330-300, A340-200, A340-300, A340-500, and A340-600 series airplanes. The NPRM published in the Federal Register on November 19, 2015 (80 FR 72398) (“the NPRM”). The NPRM was prompted by reports of additional cracking of the MLG rib 6 aft bearing lugs. The NPRM proposed to continue to require repetitive inspections of the LH and RH wing MLG rib 6 aft bearing lugs (forward and aft) to detect any cracks on the two lugs at a more restrictive initial inspection threshold with a grace period for airplanes that have already exceeded the new threshold; and replacement, if necessary. We are issuing this AD to detect and correct cracking of the MLG rib 6 aft bearing lugs, which could result in collapse of the MLG upon landing.
The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Union, has issued EASA Airworthiness Directive 2015-0120, dated June 26, 2015 (referred to after this as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for all Airbus Model A330-200, A330-200 Freighter, A330-300, A340-200, A340-300, A340-500, and A340-600 series airplanes. The MCAI states:
During Main Landing Gear (MLG) lubrication, a crack was visually found in the MLG rib 6 aft bearing forward lug on one A330 in-service aeroplane. The crack had extended through the entire thickness of the forward lug at approximately the 4 o'clock position (when looking forward). It has been determined that a similar type of crack can develop on other aeroplane types that are listed in the Applicability paragraph.
This condition, if not detected and corrected, could affect the structural integrity of the MLG attachment.
To address this situation, Airbus issued inspection Service Bulletin (SB) A330-57-3096, SB A340-57-4104 and SB A340-57-5009 to provide instructions for repetitive inspections of the gear rib lugs.
Prompted by these findings, EASA issued Emergency AD 2006-0364-E to require repetitive detailed visual inspections of the Left Hand (LH) and Right Hand (RH) wing MLG rib 6 aft bearing lugs.
Later, EASA issued AD 2007-0247-E, which superseded [EASA] AD 2006-0364-E, to:
—expand the Applicability to all A330 and A340 aeroplanes, because the interference fit bushes cannot be considered as a terminating action, owing to unknown root cause; and
—add a second parameter quoted in flight hours (FH) to the inspection interval in order to reflect the aeroplane utilisation in service.
EASA AD 2007-0247-E was revised to correct a typographical error.
Since the first crack finding and issuance of the inspection SBs and related ADs, six further cracks were reported.
Consequently, EASA issued AD 2013-0271 [which corresponds to FAA AD 2015-03-06, Amendment 39-18102 (80 FR 8511, February 18, 2015)], which retained the requirements of [EASA] AD 2007-0247R1-E, which was superseded, and expanded the Applicability of the [EASA] AD to the newly certified models A330-223F and A330-243F. That [EASA] AD also reduced the inspection threshold(s) to reflect the updated risk assessment and in-service experience.
Since this [EASA] AD was issued, a new occurrence of crack finding was reported. Further analysis resulted in the need to reduce the threshold of the initial inspection.
Prompted by this finding, Airbus issued SB A330-57-3096 Revision 06 to introduce a more restrictive initial inspection threshold and a grace period for aeroplanes which have already passed the new threshold.
For the reasons described above, this [EASA] AD partially retains the requirements of EASA AD 2013-0271, which is superseded, and introduces reduced initial inspection thresholds.
You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-4815.
CommentsPage 2
We gave the public the opportunity to participate in developing this AD. The following presents the comment received on the NPRM and the FAA's response to the comment.
Request to reference unpublished service information that terminates repetitive inspectionsPage 2
American Airlines requested that we add a paragraph to the proposed AD that references new service information that would terminate the proposed repetitive inspections. The commenter stated that an Airbus retrofit information letter was published indicating that Airbus plans to release new service information that will terminate the mandatory repetitive inspections required by AD 2015-03-06.
We do not agree because the new service information is not yet released. In an AD, we cannot refer to service information that does not exist because doing so violates Office of the Federal Register (OFR) regulations for approval of materials incorporated by reference in rules. To allow operators to use service information issued after publication of an AD, either we must supersede the AD to reference specific service information, or operators must request approval to use the new service information as an alternative method of compliance with the AD under the provisions of paragraph (k) of this AD. We have not revised this AD in this regard.
ConclusionPage 2
We reviewed the available data, including the comment received, and determined that air safety and the public interest require adopting this AD as proposed, except for minor editorial changes. We have determined that these minor changes:
• Are consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and
• Do not add any additional burden upon the public than was already proposed in the NPRM.
Related Service Information Under 1 CFR Part 51Page 3
Airbus has issued Service Bulletin A330-57-3096, Revision 06, dated May 29, 2015. The service information describes procedures for detailed inspections to detect any cracking on the forward and aft lugs of the LH and RH wing MLG Rib 6. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.
Costs of CompliancePage 3
We estimate that this AD affects 101 airplanes of U.S. registry.
The actions required by AD 2015-03-06, and retained in this AD take about 2 work-hours per product, at an average labor rate of $85 per work-hour. Based on these figures, the estimated cost of the actions that were required by AD 2015-03-06 is $170 per product.
The new requirement (reduced compliance time) of this AD adds no additional economic burden.
We have received no definitive data that would enable us to provide cost estimates for the on-condition actions specified in this AD.
Authority for This RulemakingPage 3
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. “Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory findingsPage 3
We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
1. Is not a “significant regulatory action” under Executive Order 12866;
2. Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska; and
4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
Adoption of the AmendmentPage 3
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
Adoption of the amendmentPage 3
1. The authority citation for part 39 continues to read as follows:
2. The FAA amends § 39.13 by removing Airworthiness Directive (AD) 2015-03-06, Amendment 39-18102 (80 FR 8511, February 18, 2015), and adding the following new AD:
Affected TCDS · 2
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 119
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.
| 2000 | 1 |
|---|---|
| 2003 | 5 |
| 2004 | 10 |
| 2005 | 3 |
| 2006 | 7 |
| 2007 | 7 |
| 2008 | 1 |
| 2009 | 3 |
| 2010 | 5 |
| 2011 | 6 |
| 2012 | 7 |
| 2013 | 13 |
| 2014 | 10 |
| 2015 | 7 |
| 2016 | 5 |
| 2017 | 3 |
| 2018 | 4 |
22 with no year recorded