AD 2025-04-11

Airworthiness directive · Navigation · Bombardier BD-700-2A12

Effective
April 8, 2025
Published
March 4, 2025 · 90 FR 11118–11120
Issued
February 20, 2025
Model
BD-700-2A12
Data sheet
TCDST00003NY
Registered aircraft
137 matched by model
Product
Aircraft · Large airplane
ATA chapter
34 · Navigation
Amendment
39-22969
Docket
FAA-2024-2543
Project
MCAI-2024-00342-T
Issued as
Final rule

Unofficial copy from the Federal Register XML, document 2025-03456. Only the govinfo PDF is the legal edition. DRS record last changed November 21, 2025.

On this page

Summary

The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by the discovery that a partial loss of thrust after an engine failure during a required navigation performance authorization required (RNP-AR) approach under certain weight, altitude and temperature (WAT) conditions, may lead to a descent below the specified path guidance. This AD requires a revision to the existing airplane flight manual (AFM), to incorporate updated WAT tables for RNP-AR approach operations. The FAA is issuing this AD to address the unsafe condition on these products.

The airworthiness directive

2025-04-11 Bombardier, Inc.: Amendment 39-22969; Docket No. FAA-2024-2543; Project Identifier MCAI-2024-00342 T.

(a) Effective Date

PDF page 2

This airworthiness directive (AD) is effective April 8, 2025.

(b) Affected ADs

PDF page 2

None.

(c) Applicability

PDF page 2

This AD applies to all Bombardier, Inc., Model BD-700-2A12 airplanes.

(d) Subject

PDF page 2

Air Transport Association (ATA) of America Code 34, Navigation.

(e) Unsafe Condition

PDF page 2

This AD was prompted by the discovery that a partial loss of thrust after an engine failure during a required navigation performance authorization required (RNP-AR) approach under certain weight, altitude, and temperature (WAT) conditions, may lead to a descent below 75 feet of the path guidance, requiring a go-around. The resultant vertical deviation may exceed allowable approach containment for obstacle clearance and may reduce the safety margins in the missed approach.

(f) Compliance

PDF page 2

Comply with this AD within the compliance times specified, unless already done.

(g) Revision of Existing Airplane Flight Manual (AFM)

PDF page 2

Within 30 days after the effective date of this AD, revise the existing AFM to include the information specified in (Bombardier) Global 7500 Airplane Flight Manual Temporary Revision TR-58, dated March 21, 2024.

(h) Additional AD Provisions

PDF page 2

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (i) of this AD and email to: AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or Transport Canada; or Bombardier, Inc.'s, Transport Canada Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.

(i) Additional Information

PDF page 3

For more information about this AD, contact Joseph Catanzaro, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7300; email: 9-avs-nyaco-cos@faa.gov.

(j) Material Incorporated by Reference

PDF page 3

(1) The Director of the Federal Register approved the incorporation by reference of the material listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this material as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(i) (Bombardier) Global 7500 Airplane Flight Manual Temporary Revision TR-58, dated March 21, 2024.

(ii) [Reserved]

(3) For Bombardier material identified in this AD, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-2999; email ac.yul@aero.bombardier.com; website bombardier.com.

(4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov.

Rule preamble

The FAA’s background, reasoning and cost estimate, published with the AD.

DatesPage 1

This AD is effective April 8, 2025.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of April 8, 2025.

AddressesPage 1

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-2543; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

Material Incorporated by Reference:

• For Bombardier material identified in this AD, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-2999; email ac.yul@aero.bombardier.com; website bombardier.com.

• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2024-2543.

For further information contactPage 1

Joseph Catanzaro, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7300; email: 9-avs-nyaco-cos@faa.gov.

BackgroundPage 1

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Bombardier, Inc., Model BD-700-2A12 airplanes. The NPRM published in the Federal Register on November 27, 2024 (89 FR 93528). The NPRM was prompted by AD CF-2024-22, dated June 13, 2024, issued by Transport Canada, which is the aviation authority for Canada (referred to after this as the MCAI). The MCAI states it was discovered that a partial loss of thrust after an engine failure during an RNP-AR approach under certain WAT conditions, may lead to a descent below 75 feet of the path guidance, requiring a go-around. The resultant vertical deviation may exceed allowable approach containment for obstacle clearance and may largely reduce the safety margins in the missed approach.

In the NPRM, the FAA proposed to require a revision to the existing AFM, to incorporate updated WAT tables for RNP-AR approach operations that contain possible vertical deviations within the 75-foot requirement. The FAA is issuing this AD to address the unsafe condition on these products.

You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2024-2543.

CommentsPage 2

The FAA received a comment from an individual who did not make a request the FAA can act on.

ConclusionPage 2

This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data, considered the comments received, and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.

Material Incorporated by Reference Under 1 CFR Part 51Page 2

The FAA reviewed (Bombardier) Global 7500 Airplane Flight Manual Temporary Revision TR-58, dated March 21, 2024. This material specifies procedures to update WAT tables for RNP-AR approach operations to contain possible vertical deviations within the 75-foot requirement. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of CompliancePage 2

The FAA estimates that this AD affects 70 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

Estimated Costs for Required Actions
Labor costParts costCost per productCost on U.S. operators
1 work-hour × $85 per hour = $85$0$85$5,950
Authority for This RulemakingPage 2

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory findingsPage 2

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

The amendmentPage 2

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

Adoption of the amendmentPage 2

1. The authority citation for part 39 continues to read as follows:

2. The FAA amends § 39.13 by adding the following new airworthiness directive:

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 137

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Bombardier137 aircraft
By year built
20182026
Registered aircraft by year built: 116 aircraft
20181
201912
202016
202111
20229
202322
202423
202519
20263

21 with no year recorded

By model

Aircraft

See all 137 aircraft