AD 2025-18-03

Airworthiness directive · Oxygen · Airbus A318-111, A318-112, A318-121 and 70 more

Effective
October 20, 2025
Published
September 15, 2025 · 90 FR 44319–44321
Issued
August 28, 2025
Supersedes
AD2023-25-09
Models
A318-111, A318-112, A318-121, A318-122, A319-111, A319-112 and 67 more
Registered aircraft
2,209 matched by model
Product
Aircraft · Large airplane
ATA chapter
35 · Oxygen
Amendment
39-23130
Docket
FAA-2025-1104
Project
MCAI-2024-00622-T
Issued as
Final rule

Unofficial copy from the Federal Register XML, document 2025-17786. Only the govinfo PDF is the legal edition. DRS record last changed November 21, 2025.

On this page

Summary

The FAA is superseding Airworthiness Directive (AD) 2023-25-09, which applied to all Airbus SAS Model A318, A319, A320, A321, A330-200, A330-200 Freighter, A330-300, A330-800, A330-900, A340-200, A340-300, A340-500, and A340-600 series airplanes. AD 2023-25-09 required replacing SafeLav gaseous oxygen containers (SLGOCs) affected by a production deficiency and prohibiting the installation of affected SLGOCs. Since the FAA issued AD 2023-05-09, a new airplane model has been certified, on which affected parts could be installed in service. This AD continues to require the actions in AD 2023-25-09 and adds airplanes to the applicability. The FAA is issuing this AD to address the unsafe condition on these products.

The airworthiness directive

2025-18-03 Airbus SAS: Amendment 39-23130; Docket No. FAA-2025-1104; Project Identifier MCAI-2024-00622-T.

(a) Effective Date

PDF page 2

This airworthiness directive (AD) is effective October 20, 2025.

(b) Affected ADs

PDF page 2

This AD replaces AD 2023-25-09, Amendment 39-22636 (89 FR 242, January 3, 2024) (AD 2023-25-09).

(c) Applicability

PDF page 2

This AD applies to all Airbus SAS airplanes identified in paragraphs (c)(1) through (6) of this AD, certificated in any category.

(1) Model A318-111, -112, -121, and -122 airplanes.

(2) Model A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, -153N, and -171N airplanes.

(3) Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes.

(4) Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -251NX, -252N, -252NX, -253N, -253NX, -253NY, -271N, -271NX, -272N, and -272NX airplanes.

(5) Model A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, -343, -841, and -941 airplanes.

(6) Model A340-211, -212, -213, -311, -312, -313, -541, and -642 airplanes.

(d) Subject

PDF page 2

Air Transport Association (ATA) of America Code 35, Oxygen.

(e) Unsafe Condition

PDF page 2

This AD was prompted by a report that a production deficiency of some SafeLav gaseous oxygen container (SLGOC) batches was identified during production testing of newly manufactured oxygen containers, and by the determination that additional airplanes are affected by the unsafe condition. The FAA is issuing this AD to address missing heat treatment of the actuation pin of the SLGOC, which could cause its jamming, with consequent failure of oxygen flow activation. The unsafe condition, if not addressed, could result in lack of supplemental oxygen supply in case of decompression in the cabin/lavatory, possibly resulting in injury to lavatory occupants.

(f) Compliance

PDF page 2

Comply with this AD within the compliance times specified, unless already done.

(g) Requirements

PDF page 2

Except as specified in paragraphs (h) and (i) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2024-0197, dated October 18, 2024 (EASA AD 2024-0197).

(h) Exceptions to EASA AD 2024-0197

PDF page 2

(1) Where EASA AD 2024-0197 refers to “22 May 2023 [the effective date of EASA AD 2023-0094]”, this AD requires using “February 7, 2024 (the effective date of AD 2023-25-09)”.

(2) Where EASA AD 2024-0197 refers to its effective date, this AD requires using the effective date of this AD.

(3) This AD does not adopt the “Remarks” section of EASA AD 2024-0197.

(i) No Reporting Requirement

PDF page 3

Although the material referenced in EASA AD 2024-0197 specifies to submit certain information to the manufacturer, this AD does not include that requirement.

(j) Additional AD Provisions

PDF page 3

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, AIR-520, Continued Operational Safety Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the Continued Operational Safety Branch, send it to the attention of the person identified in paragraph (k) of this AD and email to: AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, AIR-520, Continued Operational Safety Branch, FAA; or EASA; or Airbus SAS's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.

(3) Required for Compliance (RC): Except as required by paragraphs (i) and (j)(2) of this AD, if any material referenced in EASA AD 2024-0197 contains paragraphs that are labeled as RC, the instructions in RC paragraphs, including subparagraphs under an RC paragraph, must be done to comply with this AD; any paragraphs, including subparagraphs under those paragraphs, that are not identified as RC are recommended. The instructions in paragraphs, including subparagraphs under those paragraphs, not identified as RC may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC, provided the instructions identified as RC can be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to instructions identified as RC require approval of an AMOC.

(k) Additional Information

PDF page 3

For more information about this AD, contact Nicole S. Tsang, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3959; email: Nicole.S.Tsang@faa.gov.

(l) Material Incorporated by Reference

PDF page 3

(1) The Director of the Federal Register approved the incorporation by reference of the material listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this material as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(i) European Union Aviation Safety Agency (EASA) AD 2024-0197, dated October 18, 2024.

(ii) [Reserved]

(3) For EASA material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu.

(4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov.

Rule preamble

The FAA’s background, reasoning and cost estimate, published with the AD.

DatesPage 1

This AD is effective October 20, 2025.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 20, 2025.

AddressesPage 1

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-1104; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

Material Incorporated by Reference:

• For European Union Aviation Safety Agency (EASA) material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu.

• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2025-1104.

For further information contactPage 1

Nicole S. Tsang, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3959; email: Nicole.S.Tsang@faa.gov.

BackgroundPage 1

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2023-25-09, Amendment 39-22636 (89 FR 242, January 3, 2024) (AD 2023-25-09). AD 2023-25-09 applied to all Airbus SAS Model A318, A319, A320, A321, A330-200, A330-200 Freighter, A330-300, A330-800, A330-900, A340-200, A340-300, A340-500, and A340-600 series airplanes. AD 2023-25-09 required replacing affected SLGOCs and prohibiting the installation of affected SLGOCs. The FAA issued AD 2023-25-09 to address missing heat treatment of the actuation pin of the SLGOC, which could cause its jamming, with consequent failure of oxygen flow activation. This condition, if not corrected, could prevent supplemental oxygen supply in case of decompression in the cabin/lavatory, possibly resulting in injury to lavatory occupants.

The NPRM was published in the Federal Register on June 17, 2025, (90 FR 25520). The NPRM was prompted by AD 2024-0197, dated October 18, 2024 (EASA AD 2024-0197) (also referred to as the MCAI), issued by EASA, which is the Technical Agent for the Member States of the European Union. The MCAI states a new Model, A321-253NY, has been certified, on which affected parts could be installed in service.

In the NPRM, the FAA proposed to continue to require the actions in AD 2023-25-09 and to add airplanes to the applicability, as specified in EASA AD 2024-0197. The FAA is issuing this AD to address the unsafe condition on these products.

You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2025-1104.

CommentsPage 1

The FAA received a comment from the Air Line Pilots Association, International (ALPA) who supported the NPRM without change.

ConclusionPage 1

These products have been approved by the civil aviation authority of another country and are approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, that authority has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data, considered any comments received, and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on these products. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.

Material Incorporated by Reference Under 1 CFR Part 51Page 1

The FAA reviewed EASA AD 2024-0197, which specifies procedures for replacing affected SLGOCs and prohibiting the installation of affected SLGOCs. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of CompliancePage 2

The FAA estimates that this AD affects 2,018 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

Estimated Costs for Required Actions
ActionLabor costParts costCost per productCost on U.S. operators
Retained actions from AD 2023-25-09 (1,964 airplanes)2 work-hours × $85 per hour = $170$4,570$4,740$9,309,360
New actions (54 airplanes)2 work-hours × $85 per hour = $1704,5704,740255,960

According to the manufacturer, some or all of the costs of this AD may be covered under warranty, thereby reducing the cost impact on affected individuals. The FAA does not control warranty coverage for affected individuals. As a result, the FAA has included all known costs in the cost estimate.

Authority for This RulemakingPage 2

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory findingsPage 2

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

The amendmentPage 2

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

Adoption of the amendmentPage 2

1. The authority citation for part 39 continues to read as follows:

2. The FAA amends § 39.13 by:

a. Removing Airworthiness Directive (AD) 2023-25-09, Amendment 39-22636 (89 FR 242, January 3, 2024); and

b. Adding the following new AD:

Affected TCDS · 3

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 2,209

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Airbus1,589 aircraft
  • Airbus Industrie407 aircraft
  • Airbus S A S213 aircraft
By year built
19912026
Registered aircraft by year built: 2,070 aircraft
19913
199213
19938
19941
19954
19967
199714
199853
199962
200094
200188
200264
200345
200437
200543
200650
200736
200828
200943
201023
201144
201253
201382
201492
201595
201695
2017115
2018109
201999
202056
202175
202290
202396
2024117
202584
202652

139 with no year recorded

By model

See all 58 models

Aircraft

See all 2,209 aircraft