AD 2026-18-02

Airworthiness directive · Time Limits/Maintenance Checks · Dassault FALCON 2000

Effective
October 16, 2026
Published
September 11, 2026 · 91 FR 57777–57780
Issued
August 31, 2026
Model
FALCON 2000
Data sheet
TCDSA50NM
Registered aircraft
153 matched by model
Product
Aircraft · Large airplane
ATA chapter
05 · Time limits and maintenance checks
Amendment
39-23457
Docket
FAA-2026-4662
Project
MCAI-2026-00207-T
Issued as
Final rule

Unofficial copy from the Federal Register XML, document 2026-18602. Only the govinfo PDF is the legal edition. DRS record last changed September 11, 2026.

On this page

Summary

The FAA is superseding Airworthiness Directive (AD) 2023-22-12, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-12, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-22-12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.

The airworthiness directive

2026-18-02 Dassault Aviation: Amendment 39-23457; Docket No. FAA-2026-4662; Project Identifier MCAI-2026-00207-T.

(a) Effective Date

PDF page 3

This airworthiness directive (AD) is effective October 16, 2026.

(b) Affected ADs

PDF page 3

This AD replaces AD 2023-22-12, Amendment 39-22596 (88 FR 81342, November 22, 2023) (AD 2023-22-12).

(c) Applicability

PDF page 3

This AD applies to all Dassault Aviation Model FALCON 2000 airplanes, certificated in any category.

(d) Subject

PDF page 3

Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks.

(e) Unsafe Condition

PDF page 3

This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address reduced controllability of the airplane.

(f) Compliance

PDF page 3

Comply with this AD within the compliance times specified, unless already done.

(g) Retained Revision of the Existing Maintenance or Inspection Program, With a New Terminating Action

PDF page 3

This paragraph restates the requirements of paragraph (j) of AD 2023-22-12, with a new terminating action. Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2023-0099, dated May 11, 2023 (EASA AD 2023-0099). Accomplishing the revision of the existing maintenance or inspection program required by paragraph (j) of this AD terminates the requirements of this paragraph.

(h) Retained Exceptions to EASA AD 2023-0099, With No Change

PDF page 3

This paragraph restates the exceptions specified in paragraph (k) of AD 2023-22-12, with no change.

(1) This AD does not adopt the requirements specified in paragraphs (1) and (2) of EASA AD 2023-0099.

(2) Paragraph (3) of EASA AD 2023-0099 specifies revising “the approved AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after December 27, 2023 (the effective date of AD 2023-22-12).

(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2023-0099 is at the applicable “limitations” and “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2023-0099, or within 90 days after December 27, 2023 (the effective date of AD 2023-22-12), whichever occurs later.

(4) This AD does not adopt the provisions specified in paragraphs (4) and (5) of EASA AD 2023-0099.

(5) This AD does not adopt the “Remarks” section of EASA AD 2023-0099.

(i) Retained Provisions for Alternative Actions and Intervals, With a New Exception

PDF page 3

This paragraph restates the requirements of paragraph (l) of AD 2023-22-12, with a new exception. Except as required by paragraph (j) of this AD, after the existing maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions ( e.g., inspections), and intervals are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2023-0099.

(j) New Revision of the Existing Maintenance or Inspection Program

PDF page 3

Except as specified in paragraph (k) of this AD: Comply with all required actions and compliance times specified in, and in accordance with EASA AD 2026-0040, dated February 27, 2026 (EASA AD 2026-0040). Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraph (g) of this AD.

(k) Exceptions to EASA AD 2026-0040

PDF page 3

(1) This AD does not adopt the requirements specified in paragraphs (1) and (2) of EASA AD 2026-0040.

(2) Paragraph (3) of EASA AD 2026-0040 specifies revising the approved aircraft maintenance program (AMP) within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.

(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2026-0040 is at the applicable limitations and associated thresholds as incorporated by the requirements of paragraph (3) of EASA AD 2026-0040.

(4) This AD does not adopt the provisions specified in paragraphs (4) and (5) of EASA AD 2026-0040.

(5) This AD does not adopt the “Remarks” section of EASA AD 2026-0040.

(l) New Provisions for Alternative Actions and Intervals

PDF page 3

After the existing maintenance or inspection program has been revised as required by paragraph (j) of this AD, no alternative actions ( e.g., inspections) and intervals are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2026-0040.

(m) Additional AD Provisions

PDF page 3

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (n) of this AD and email to: AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or Dassault Aviation's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.

(n) Additional Information

PDF page 3

For more information about this AD, contact Amanda Pieraccini, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7329; email: 9-AVS-AIR-BACO-COS@faa.gov.

(o) Material Incorporated by Reference

PDF page 3

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the material listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this material as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(3) The following material was approved for IBR on October 16, 2026.

(i) European Union Aviation Safety Agency (EASA) AD 2026-0040, dated February 27, 2026.

(ii) [Reserved]

(4) The following material was approved for IBR on December 27, 2023 (88 FR 81342, November 22, 2023).

(i) European Union Aviation Safety Agency (EASA) AD 2023-0099, dated May 11, 2023.

(ii) [Reserved]

(5) For EASA material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu.

(6) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(7) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov.

Rule preamble

The FAA’s background, reasoning and cost estimate, published with the AD.

DatesPage 1

This AD is effective October 16, 2026.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 16, 2026.

The Director of the Federal Register approved the incorporation by reference of a certain other publication listed in this AD as of December 27, 2023 (88 FR 81342, November 22, 2023).

AddressesPage 2

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2026-4662; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

Material Incorporated by Reference:

• For European Union Aviation Safety Agency (EASA) material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu.

• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2026-4662.

For further information contactPage 2

Amanda Pieraccini, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7329; email: 9-AVS-AIR-BACO-COS@faa.gov.

BackgroundPage 2

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2023-22-12, Amendment 39-22596 (88 FR 81342, November 22, 2023) (AD 2023-22-12). AD 2023-22-12 applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA issued AD 2023-22-12 to address reduced controllability of the airplane.

The NPRM was published in the Federal Register on June 30, 2026 (91 FR 39575). The NPRM was prompted by AD 2026-0040, dated February 27, 2026 (EASA AD 2026-0040) (also referred to as the MCAI), issued by EASA, which is the Technical Agent for the Member States of the European Union. The MCAI states that new or more restrictive airworthiness limitations have been developed.

In the NPRM, the FAA proposed to continue to require certain actions in AD 2023-22-12 and require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in EASA AD 2026-0040. The FAA is issuing this AD to address the unsafe condition on these products.

You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2026-4662.

CommentsPage 2

The FAA received no comments on the NPRM or on the determination of the cost.

ConclusionPage 2

These products have been approved by the civil aviation authority of another country and are approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, that authority has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data, considered any comments received, and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on these products. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.

Material Incorporated by Reference Under 1 CFR Part 51Page 2

EASA AD 2026-0040 specifies new or more restrictive airworthiness limitations for airplane structures and safe life limits.

This AD also requires EASA AD 2023-0099, dated May 11, 2023, which the Director of the Federal Register approved for incorporation by reference as of December 27, 2023 (88 FR 81342, November 22, 2023).

This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of CompliancePage 2

The FAA estimates that this AD affects 150 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

The FAA estimates the total cost per operator for the retained actions from AD 2023-22-12 to be $7,650 (90 work-hours × $85 per work-hour).

The FAA has determined that revising the existing maintenance or inspection program takes an average of 90 work-hours per operator, although the agency recognizes that this number may vary from operator to operator. Since operators incorporate maintenance or inspection program changes for their affected fleet(s), the FAA has determined that a per-operator estimate is more accurate than a per-airplane estimate. Therefore, the FAA estimates the average total cost per operator for the new actions to be $7,650 (90 work-hours × $85 per work-hour).

Authority for This RulemakingPage 2

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory findingsPage 2

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

The amendmentPage 3

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

Adoption of the amendmentPage 3

1. The authority citation for part 39 continues to read as follows:

2. The FAA amends § 39.13 by:

a. Removing Airworthiness Directive (AD) 2023-22-12, Amendment 39-22596 (88 FR 81342, November 22, 2023); and

b. Adding the following new AD:

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 153

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Dassault153 aircraft
By year built
19762019
Registered aircraft by year built: 144 aircraft
19761
19931
19942
19959
199615
19978
19989
199923
200016
200121
200225
20034
20044
20053
20062
20191

9 with no year recorded

By model

Aircraft

See all 153 aircraft