- Model
- 247-D (Army C-73)
- Data sheet
- TCDSATC 558
- Registered aircraft
- 1 matched by model
- Product
- Aircraft · Small airplane
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | 8b2ba0fe…84c62ba | FAA DRS (API key needed) |
On this page
The airworthiness directive
44-52-01 BOEING: (Was Service Note 1 of AD-558-1 and Service Note 1 of AD-524-1.) Applies to 247-D Aircraft. Inspect immediately and every 250 hours thereafter the outer wing panel 17SRT aluminum alloy spar chord members for cracks. Unless special openings are installed, the outer panels may have to be removed to permit thorough inspection. If cracks are found, the members should be repaired or replaced in a manner satisfactory to the FAA. If replacement 24ST tubing is installed no further inspection will be necessary. Boeing Service Bulletin No. 1 of D-6134 describes a satisfactory method of installation of inspection openings in the lower surface of the outer wing. Boeing Service Bulletin No. 2 of D-6134 covers replacement of 17SRT spar chords with 24ST spar chords.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 1
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.