AD 46-13-01

Airworthiness directive · Landing Gear Hose Ferrules · Lockheed 18

Model
18
Data sheet
TCDSA-723
Registered aircraft
2 matched by model
Product
Aircraft · Large airplane

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

46-13-01 LOCKHEED: (Was Service Note 2 of AD-723-2.) Applies to All Model 18 Aircraft. When replacing the landing gear actuating cylinder flexible hose, P/N 55252-3, the length of ferrules should be compared. If longer ferrules are found on the new hoses, an elbow should be inserted between the hose and the cylinder aft port, to prevent possible damage to the hose by the landing gear scissors. (Lockheed Service Letter No. 18-28, dated June 15, 1945, revised December 10, 1945, covers this same subject.)

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 2

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Lockheed2 aircraft

By model

Aircraft