- Models
- Army UC-64, Army UC-64A, Army UC-64B
- Data sheet
- TCDSA-2-578
- Product
- Aircraft · Small airplane
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | 2a1c7f37…87c6fc5 | FAA DRS (API key needed) |
On this page
The airworthiness directive
46-23-05 NOORDUYN: (Was Mandatory Note 1 of AD-2-578-1.) Applies to Army UC- 64, -64A, and -64B Aircraft. Required at next periodic inspection. Inspect the trailing edge of the horizontal stabilizer to determine whether or not drain holes are present in the metal trailing edge cover. If the holes are not present, it will be necessary to remove enough fabric to permit inspection of the ribs. Defective or deteriorated wood must be replaced and drain holes, approximately 1/16-inch diameter, spaced to drain all pockets must be drilled.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.