AD 47-06-06

Airworthiness directive · Engine Breather Line · Swift Museum Foundation GC-1A and GC-1B

Models
GC-1A, GC-1B
Data sheet
TCDSA-766
Registered aircraft
541 matched by model
Product
Aircraft · Small airplane

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

47-06-06 GLOBE: (Was Mandatory Note 9 of AD-766-5.) Applies to Models GC-1A and GC-1B Aircraft Serial Numbers 3 to 408 Inclusive; 1001 to 1460 Inclusive; and 2001 to 2329 Inclusive.

Compliance required prior to April 1, 1947.

Cut off the egress end of the engine breather line to terminate the line 1-inch above the grill opening. This will prevent clogging of the line due to formation of ice during cold weather operation or the entry of foreign matter caused by the propeller blast.

(Globe Customer Service Maintenance Bulletin No. 11 covers this same subject.)

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 541

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Globe426 aircraft
  • Temco115 aircraft
By year built
19451978
Registered aircraft by year built: 437 aircraft
19451
1946317
19477
194880
194910
195011
19513
19521
19531
19541
19563
19571
19781

104 with no year recorded

By model

Aircraft

See all 541 aircraft