- Model
- RC-3
- Data sheet
- TCDSA-769
- Registered aircraft
- 126 matched by model
- Product
- Aircraft · Small airplane
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | 079076f6…57a544b | FAA DRS (API key needed) |
On this page
The airworthiness directive
47-21-19 REPUBLIC: (Was Mandatory Note 9 of AD-769-2.) Applies to Model RC-3 Aircraft Serial Numbers 5 to 238, Inclusive.
Compliance required not later than the next 25 hours of operation subsequent to July 1, 1947, but in no case later than September 1, 1947.
Inspect parking brake, battery, mixture and carburetor heat flexible controls for presence of brass ferrule or AN 742D3 clamp on split sleeve at operating end of these controls. If clamp or ferrule is not installed, split metal sleeve can open permitting casing to slide out when control is actuated thus rendering the control ineffective. The above clamp should be installed immediately.
(Seabee Service News No. 10, dated January 13, 1947, covers this subject.)
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 126
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.
| 1946 | 19 |
|---|---|
| 1947 | 73 |
| 1962 | 1 |
33 with no year recorded