AD 47-49-02

Airworthiness directive · Nose Gear Extension Line Clearance · Lockheed 49-46

Model
49-46
Data sheet
TCDSA-763
Registered aircraft
1 matched by model
Product
Aircraft · Large airplane

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

47-49-02 LOCKHEED: (Was Mandatory Note 35 of AD-763-3.) Applies to All Model 49 Serials Up to and Including 2088.

Compliance required prior to February 15, 1948.

Inspect nose landing gear emergency extension line in nose wheel well (LAC P/N 272239- 164) to ascertain whether adequate clearance exists with respect to the nose gear actuating cylinder. If adequate clearance does not exist, replace this line with a new part, LAC 285106-311 or equivalent.

(LAC Service Bulletin No. 49/SB-164 covers this same subject.)

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 1

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Lockheed1 aircraft

By model

Aircraft