AD 47-49-07

Airworthiness directive · Drag Link Bolt Replacement · Lockheed 49-46

Model
49-46
Data sheet
TCDSA-763
Registered aircraft
1 matched by model
Product
Aircraft · Large airplane

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

47-49-07 LOCKHEED: (Was Mandatory Note 40 of AD-763-3.) Applies to All Model 49 Serials Up to and Including 2088, Unless Equipped With MLG Drag Strut Dampers.

Compliance required prior to February 1, 1948.

(a) Replace the NAS 58A65 bolt used to connect the two halves of each MLG upper drag link assembly, LAC P/N 283418 and 288983, with a 5/8-inch diameter high strength bolt, LAC P/N 297902.

(LAC Service Bulletin 49/SB-368 covers installation of MLG shock strut dampers.)

(b) Reduce MLG shock strut inflation pressures to provide a static extension of 2 inches at maximum landing weight.

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 1

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Lockheed1 aircraft

By model

Aircraft