- Model
- Safety Belt Buckles
- Product
- Appliance
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | 00329389…03ebfb4 | FAA DRS (API key needed) |
On this page
The airworthiness directive
55-08-01 BEECH SAFETY BELT BUCKLES: Applies to All Beech Safety Belt Buckles, P/N 113652.
Compliance required as soon as possible but not later than September 1, 1955.
Inspect Beech safety buckles by checking the buckle lever attachment pin for snap ring retainers installed at each end.
All Beech buckles with buckle lever dowel type attaching pin retainers in lieu of buckle lever attaching pins with snap ring retainers should be retired from service by replacement with the newer improved safety buckle with through pin and snap ring retainers.
(Beech Service Bulletin No. OS-55-1 issued January 25, 1955, covers this same subject.)