- Models
- 377, 377MG, 377SGT
- Data sheet
- TCDSA-812
- Registered aircraft
- 1 matched by model
- Product
- Aircraft · Large airplane
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | 2a6877f4…683a8b6 | FAA DRS (API key needed) |
On this page
The airworthiness directive
55-15-01 BOEING: Applies to All Boeing 377 Series Aircraft with Hamilton Standard Propellers. Compliance required by first scheduled engine change after November 1, 1955, but not later than November 1, 1956. To increase the fire resistance integrity of the propeller feathering system against damage by a powerplant fire, all flexible hose components of propeller feathering lines forward of the firewall in zone 2 must be replaced with lines and fittings which will meet current fire resistance requirements. The following hose assemblies are considered acceptable for this applications: (a) Aeroquip 680-10S hose assemblies with Aeroquip 304 protective sleeves over end fittings (Aeroquip assembly P/N 304000). (b) Resistoflex SSFR-3800-10 hose assemblies. (c) Aeroquip 309009-10S hose assemblies.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 1
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.