- Model
- 560-A
- Data sheet
- TCDS6A1
- Registered aircraft
- 10 matched by model
- Product
- Aircraft · Small airplane
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | 1a330d5e…057b3d9 | FAA DRS (API key needed) |
On this page
The airworthiness directive
56-02-01 AERO COMMANDER: Applies to Model 560A Aircraft, Serial Numbers 231 Through 269.
Compliance required by April 1, 1956.
Due to loss of an augmenter tube in flight, new type support clamps are required at the aft end of the augmenter tubes and at nacelle frames 148.75 and 158.75. Also, new support clips bolted through the augmenter tube at the aft end are required. Parts will be furnished by Aero Design and the rework is described in Aero Commander Service Bulletin No. 31.
This supersedes CAA telegram of December 5, 1955, which required immediate inspection and installation of a 10-32 machine screw through the bell mouth and augmenter tube.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 10
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.
| 1955 | 4 |
|---|---|
| 1956 | 4 |
2 with no year recorded