- Model
- 1649A-98
- Data sheet
- TCDS4A17
- Registered aircraft
- 1 matched by model
- Product
- Aircraft · Large airplane
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 20 KB | a393a959…99de645 | FAA DRS (API key needed) |
On this page
The airworthiness directive
58-13-03 LOCKHEED: Applies to All Model 1649A Aircraft.
Compliance required as indicated.
Model 1649A aircraft have been found to have possible hazardous wing bending oscillation, dynamically induced by aileron oscillation, under certain combinations of boost package tolerances and autopilot modulating piston follow-up failure. In order to correct this condition, the following must be accomplished:
Modify the aileron control valve by installing a new modulating piston stop to meet limits of aileron deflection rates of 7.5 degrees per second minimum and 11 degrees per second maximum. The valve is then to be reidentified as 668152-11 and to be painted yellow to denote noninterchangeability with elevator and rudder valves. Details of the necessary modifications are given in Lockheed communication FS/225805-W, dated June 13, 1958.
This modification is to be accomplished as soon as maintenance schedules will permit but not later than January 1, 1959. Until the modification is accomplished, the airplane must be flown in autopilot operation at speeds not to exceed 215 KIAS.
This supersedes AD 58-11-04.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 1
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.