AD 63-15-05

Airworthiness directive · Steel Control Guides · Industrie Aeronautiche e Meccaniche P.166

Effective
August 20, 1963
Model
P.166
Data sheet
TCDS7A4
Product
Aircraft · Small airplane

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

63-15-05 PIAGGIO: Amdt. 587 Part 507 Federal Register July 19, 1963. Applies to Model P.166 Aircraft, Serial Numbers 1 through 405.

Compliance required within 25 hours' time in service after the effective date of this AD.

To prevent failure at the flared end of the Teleflex rod guide tube, in the throttle, fuel cut- off, propeller and hot air controls, accomplish the following:

PARTS REQUIRED

No. Required Description Part Number 2 Sheath, throttle control guide 66-S. 1107.01 2 Sheath, engine stop control guide 66-S. 1107.02 2 Sheath, propeller control guide 66-S. 1107.03 2 Sheath, hot air control guide 66-S. 1107.04

Unless previously accomplished, remove the aluminum sheath control guides and install new steel control guides as shown in the preceding table, in accordance with Piaggio Service Bulletin No. 166.31 dated November 22, 1962.

This directive effective August 20, 1963.

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft

No registered aircraft matched this AD’s modelsForeign aircraft aren’t included, and ADs on propellers and appliances aren’t matched by model.