- Models
- 727-100 Series, 727-100C Series, 727-200 Series, 727-200F Series, 727 Series, 727C Series
- Data sheet
- TCDSA3WE
- Registered aircraft
- 25 matched by model
- Product
- Aircraft · Large airplane
- Amendment
- 39-27
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 20 KB | b7458f2a…b3306f9 | FAA DRS (API key needed) |
On this page
The airworthiness directive
65-03-02 BOEING: Amdt. 39-27 Part 39 Federal Register February 2, 1965. Applies to Model 727 Series Aircraft.
Compliance required within the next 25 hours' time in service after the effective date of this AD unless already accomplished.
Conduct visual inspection of the lower left and right-hand horizontal stabilizer trailing edge panels P/N's 65-22403-7 and -8 at Elevator Stations 50.50 through 66.50 for three drain holes on the outboard portions of panel directly behind and in line with the elevator control tab push rod. If drain holes are not provided, rework subject panels in accordance with Boeing Alert Service Bulletin No. 55-14A before further flight except that either 1/4-inch holes or 1/2-inch holes are acceptable.
(Boeing Alert Service Bulletins 55-14 and 55-14A cover this same subject.)
This directive effective upon publication in the Federal Register for all persons except those to whom it was made effective immediately by telegram dated January 15, 1965.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 25
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.
| 1971 | 1 |
|---|---|
| 1973 | 1 |
| 1975 | 2 |
| 1976 | 3 |
| 1977 | 2 |
| 1978 | 2 |
| 1979 | 1 |
| 1981 | 5 |
| 1982 | 1 |
7 with no year recorded