AD 66-16-02

Airworthiness directive · Engine Mounting Fuselage Frame · Airbus BAC 1-11 200 Series

Effective
July 31, 1966
Model
BAC 1-11 200 Series
Data sheet
TCDSA5EU
Product
Aircraft · Large airplane
Amendment
39-254

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

66-16-02 BRITISH AIRCRAFT CORPORATION: Amdt. 39-254 Federal Register July 1, 1966. Applies to Model BAC 1-11 200 Series Airplanes.

Compliance required before the accumulation of 3,000 hours' time in service for airplanes with less than 2,900 hours' time in service on the effective date of this AD and within the next 100 hours' time in service after the effective date of this AD for airplanes with 2,900 or more hours' time in service on the effective date of this AD unless already accomplished.

To prevent chafing of the fuselage frame forward flange by the aft end of the headliner, rework the headliner, P/N AB77 A1605, and inspect the flange of fuselage frame, P/N AB29 A501, and rework as necessary in accordance with British Aircraft Corporation (BAC) One- Eleven Alert Service Bulletin 53-A-PM 2107, dated February 1, 1966, or later ARB-approved issue.

This directive effective July 31, 1966.

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft

No registered aircraft matched this AD’s modelsForeign aircraft aren’t included, and ADs on propellers and appliances aren’t matched by model.